VibrAlign, Inc.
Richmond, VA 23236
Oct 07, 2008 Fixturlaser GO laser shaft alignment system uses wired connections between display unit and laser sensors and has dedicated horizontal and vertical shaft alignment routines. System offers large detector size, line lasers for acquisition, and built-in inclinometers in both laser transmitter-detectors. Capable of saving its data locally, system can also be connected to computer for download of data via USB connection.

Alignment Supplies, Inc.
Maumee, OH 43537
Sep 04, 2008 Made of stainless steel for use in extreme and harsh environments, Easy-Laser® Extreme(TM) D550 is intrinsically safe and EX-ATEX approved for explosive areas. In addition, shaft alignment system is shockproof, dustproof, waterproof, and classified to IP66 and IP67 standards.

Sensor Products Inc.
Madison, NJ 07940
Aug 29, 2008 Designed for converting and printing, Mini Sigma-Nip® measures nip widths of rolls with circumferences smaller than 20 in. Sensors capture data and record nip width readings while being viewed on laptop containing Windows-based software. Adjustments to load are made in real-time while sensors are in closed, non-rotating nip. Useful for continuous maintenance as well as during equipment setup and shutdown, Mini Sigma-Nip exposes problems with alignment, skewing, and crown deficiencies.

Pinpoint Laser Systems
Peabody, MA 01960
Aug 15, 2008 Computer Interface Module, designed for Laser Microgage 2D Alignment System, can be added or removed at anytime by disconnecting interface cable. Pinpoint Capture software is included for selecting and collecting data. It lets users scale measurement readings, apply offsets, change preferred measurement units, and view readings in numerical or graphic formats. Limit settings and indicators are also available, and measurement recording can be done via continuous or trigger modes.

Automation Engineering Incorporated
Wilmington, MA 01887
Apr 08, 2008 CMAT(TM) (Camera Module Assembly, Align and Test) systems use machine vision to actively align lens assembly in X/Y/Z axes and across corners in pitch and roll, achieving even focus across focal plane. Remote support capabilities, from diagnostics to process refinement and faultfinding, are based on Virtual Network Computing (VNC) technology. Flexible automation system enables production of different models on same equipment and production lines with minimal changeover requirements.

Pinpoint Laser Systems
Peabody, MA 01960
Feb 15, 2008 Facilitating alignment of rollers, shafts, and web-handling systems, Roll Alignment Kit makes quantitative measurements over large machines with many rollers. Laser is placed on swiveling base, and plane of laser light is directed across top of rollers. Digital receiver and display allow operator to determine roller orientation to within .001 in. Digital information on position of laser beam can be used for calculating surface flatness, runout straightness, and parallelism.

Unitek Miyachi Corporation
Monrovia, CA 91017 7133
Feb 05, 2008 Model LMF-2000, available in 10 and 20 W versions, is capable of Q-switch frequencies of 2-500 kHz. Users can specify tailored solutions with features that include PC, touchscreen, integrated rotary, LAN connectivity, and XYZ motion. Options include in-line camera that provides non-intrusive code verification and is available with standard or additional marking software.

Pinpoint Laser Systems
Peabody, MA 01960
Feb 01, 2008 Microgage 2D combines compact laser transmitter with receiver and digital display. Transparent receiver operates at up to 100 ft and delivers measuring precision of less than 0.0005 in. As laser moves across it in vertical or horizontal direction, display provides reading of motion, accurate to 0.0001 in. Device is battery-operated and serial and USB interface connect to laptop or PC and link to spreadsheets for plotting and analyzing data for maintenance records.

Pinpoint Laser Systems
Peabody, MA 01960
Sep 17, 2007 Combining compact laser transmitter with receiver and digital display, 2D Microgage Laser alignment tool enables precision measuring, machine alignment, and calibration. Laser moves across receiver vertically or horizontally and device operates on batteries over distance of 100 ft. It also features sealed pushbutton keypad as well as serial and USB interface, that connects to laptop or PC, which links to spreadsheets for plotting and analyzing data.

Metronor, Inc.
Seattle, WA 98101
Jul 12, 2007 Employing 2 cameras, SOLO TWIN offers point-and-shoot functionality and 70° field of view that lets operator get close to assembly tooling that needs to be measured for certification and alignment. Within 15 minutes, unit makes it possible to set-up measurement system; tie-in to coordinate system; perform measurements of critical assembly tool features; verify measurement data relative CAD nominal; and correct tool alignment issues of tool without interfering with production cycle.

Ludeca Inc.
Miami, FL 33172
Jul 02, 2007 Suited for maintenance work on rotating equipment, OPTALIGN® smart laser shaft/coupling alignment system features modular concept that enables users to design their own shaft alignment system. Alphanumeric keyboard with navigation, menu keys, and help text produces screen picture of measurement results. It also includes automatic continuous sweep measurement mode that evaluates hundreds of readings during shaft rotation.

Pinpoint Laser Systems
Peabody, MA 01960
May 09, 2007 Designed for use on factory floor to align and adjust various machinery, Spindle Alignment Kit provides information on runout, centerline offset, parallelism, concentricity, and other parameters to achieve optimal alignment. With ability to measure to precision of 0.0001 in., Microgage system features round laser that is secured into chuck or attached to end of shaft/spindle and allows for alignments up to 150 ft distances.

Pinpoint Laser Systems
Peabody, MA 01960
Apr 13, 2007 Suited for use in factories and manufacturing facilities, Dual-Axis Alignment Kit includes 90-Line laser squaring attachment for checking machine beds, vertical cutting machinery, roll parallelism, squaring slides and gantries, and measuring geometric parameters. Laser beam enters 90-Line through port in front and exits out side port at 90° to incoming beam. Machined from solid aluminum, 90-Line has locking mechanism for pre-set positions and friction lock to hold beam in place.

Pinpoint Laser Systems
Peabody, MA 01960
Feb 14, 2007 Combining laser transmitter with receiver and digital display, Microgage 2D operates on batteries over distance of 100 ft. All components are machined from solid aluminum with hard anodized coating for wear resistance. Serial and USB interface connect to PC and link to spreadsheets for plotting and analyzing data. System is suitable for checking and aligning roll and web lines, CNC cutting and milling equipment, lathes, stamping presses, and injection molding machines.

Photonic Products, Ltd.
Huntington Beach, CA 92647
Feb 14, 2007 Suited for industrial alignment and machine vision applications, 300-0100-00 Series 645 nm Modules offer interchangeable pre-aligned optics, including 88° cross, 58° line, and 58° cross/spot. Units incorporate anti-surge, anti-static, and reverse protected electronics, as well as anti-reflection, scratch-resistant glass window, and 2.1 mm jack socket, all contained in 14 mm dia housing. Each is supplied with adjustable mounting bracket, power supply, and power adjustment tool.

Leica Geosystems Inc.
Norcross, GA 30092
Jan 26, 2007 Rugby 55 features easy-to-use keypad, watertight seal, variable head speeds, selectable scanning modes, bright red beam, and alkaline or rechargeable NiMH battery pack. Scan-90 feature moves scanning or stationary beam in 90° intervals through each of 4 axes, while beam down mode positions beam below laser when doing layout work. Sleep Mode helps conserve battery life. Mounted on tripod or batter board clamp, Rugby 55 allows user to set out corners and align forms and foundations.

Edmund Optics
Barrington, NJ 08007
Jan 25, 2007 With more than 25 options, TECH SPEC(TM) Mechanics consist of optical mounts and mounting table platforms that are adaptable to variety of applications. Mounts feature ±5° of tip/tilt, 100 TPI fine adjustment screws, aluminum plates, and common mounting bores for No. 8/M4 socket-head cap screws. Stainless steel adjustment mechanisms ensure repeatability, while nylon contact rods and screws protect optics. Optical holders are available for common sizes of English and Metric components.

Pinpoint Laser Systems
Peabody, MA 01960
Jan 17, 2007 Able to operate over distances from few inches to 120 ft, Laser-based Microgage 2D system measures flatness of rolls, moving machinery stages, gantry systems, actuators, and moving equipment to precision of 0.0001 in. It may also be used for leveling and checking machinery that may be exhibiting high-wear characteristics. Battery-operated, 2-axis product combines compact laser transmitter with receiver and digital display. Accessories expand alignment capabilities.

Pinpoint Laser Systems
Peabody, MA 01960
Jan 12, 2007 Microgage 2D Factory Alignment Kit features 90-Line Right Angle which takes reference laser beam from Microgage 2D and turns it by 90° for squaring machinery and equipment. Capable of holding precision optical elements that redirect laser beam, Angle housing has several adjustments that allow square exiting beam to rotate through a full plane. Beam can be adjusted with precision rotary mount, and 2-axis stage mount allows easy positioning of the 90-Line.

Pinpoint Laser Systems
Peabody, MA 01960
Oct 06, 2006 Combining compact laser transmitter with receiver and digital display, 2-axis Microgage 2D is suited for precision measuring, machine alignment, calibration, and other industrial applications. Laser moves across receiver in vertical or horizontal direction providing reading of motion to 0.0001 in. over distances of 100 ft. It connects to PC or laptop for plotting and analyzing data for maintenance records and customer compliance.