Rudolph Technologies, Inc.    Flanders, NJ 07836
May 14, 2013 Available for transparent films in advanced semiconductor fabrication applications, S3000SX™ System uses focused beam ellipsometry and small site measurement optics to measure thickness of single- and multi-layer films on product wafers, including device area at site sizes as small as 30 x 30 µm. Available metrology options include deep UV (190 nm) reflectometry, wafer stress and bow measurements, and next-generation airborne molecular contaminant control.

RGB Spectrum    Alameda, CA 94501
Apr 08, 2013 With up to 16 inputs and 16 outputs, OmniWall™ is suited for 2 x 2, 3 x 3, or 3 x 4 screen arrays, or linear configurations from 1 x 16 to 16 x 1. For larger video walls, OmniWall 32 offers up to 32 input and 32 outputs. Multiple chassis can be connected in parallel for even larger walls. System supports DVI resolutions up to 1,920 x 1,200, and 4K (UltraHD) up to 4,096 x 2,160. HDCP compliance allows processor to accommodate content-protected HDMI signals and provide embedded audio pass-through.

Newport Corp.    Irvine, CA 92606
Mar 07, 2013 By placing Model UVU-2A into path of UV laser, beam characteristics such as laser mode structure, beam shape, and beam alignment can be observed. Optically clear glass of cleanroom-compatible viewer will glow white green when exposed to UV radiation. Featuring 48.3 mm aperture, thin 5 mm profile, and useful wavelength range of 193–355 nm, viewer is suited for Excimer lasers used in semiconductor manufacturing, micromachining, and eye surgery applications.

Newport Corporation    Irvine, CA 92606
Feb 27, 2013 Placed into path of UV laser, optically clear UVU-2A enables observation of such beam characteristics as laser mode structure, beam shape, and beam alignment. Optical glass of clean-room-compatible UV beam viewer glows white green when exposed to UV radiation, and useful wavelength range is 193–355 nm. While 5 mm profile allows insertion into tight optical setups, housing provides threaded No. 8-32 and M4 holes to enable use as wand or mounting on bench.

HoodTech Vision    Hood River, OR 97031
Dec 21, 2012 Compatible with all HoodTech Alticam turrets, Alticam™ Pod aluminum housing includes GPS/INS capability and features Alticam video processing (AVS) with object tracking, electronic de-jitter, and several video functions. Moving map, also included, helps improve operator situational awareness. Solution is designed as test vehicle for operation of HoodTech Vision (HTV) payloads in fixed-wing aircraft and as rugged vehicle for manned, fixed wing application of various HTV systems.

Rohde & Schwarz GmbH & Co      Germany
Dec 18, 2012 With CLIPSTER® 5.3, cinema films can be mastered at 48 fps in 3D instead of standard 24 fps. Movements appear crisp and smooth to viewer, especially with fast tracking shots or jerky actions. High frame rate also eliminates shaking or judder caused by lack of continuity between consecutive frames. In addition to 500 Mbps bit rate, CLIPSTER offers 3D subtitles which are animated along depth axis, leading to continual depth-adjustment of subtitles to stereoscopic situation of image.

Gadspot    City of Industry, CA 91744
Dec 04, 2012 Panorama Camera, Panorama Dome Camera, and Panorama Outdoor Dome Camera feature resolution of 1,600 x 1,200 pixels and HD resolution of 720p at 30 fps. Units integrate 2-megapixel CMOS sensor, 2-way audio connectors, Power-over-Ethernet, Micro SD card for local storage, and digital I/O for alarm triggering. Suitable for small businesses, retail stores, and homes, units also include distortion correction and real-time H.264 and motion JPEG dual codec.

Digital Monitoring Products    Springfield, MO 65803
Nov 21, 2012 Pan and tilt IP video camera, used with SecureCom Wireless Video Services, begins recording automatically when motion is detected, in day or night view. Users can view and record video via Virtual Keypad™ App, and see it streamed live on mobile device at 10 fps. Suited for commercial or residential installations, product is available in models for interior and exterior use in wired and wireless versions. Up to 6 cameras can be used in system with wireless access point for networking.

Intergraph Corp.    Huntsville, AL 35824
Oct 16, 2012 Linking video surveillance feeds to computer-aided dispatch software, Video Responder enables dispatchers to automatically identify and view camera feeds in vicinity of incident on CAD map. Public safety and security personnel can monitor live feeds and enter information directly into CAD, aiding surveillance and virtual patrol. Working with I/CAD 9.2, system supports feeds from multiple vendors and agencies in common operating picture with geospatial maps, tabular data, and related information.

Rohde & Schwarz GmbH & Co      Germany
Aug 20, 2012 With DCI validation tool, CLIPSTER® DI Workstation v5 is capable of generating mezzanine formats such as IMF. DCP test functions enable Digital Cinema Packages to not only be verified to ensure they comply with all DCI standards, but also to see if they can be played back on popular DCI players. Users can make selective changes to every DCP-validation parameter to suit various test procedures. In stereoscopic workflows, CLIPSTER® offers automatic analysis, correction, and quality control.

Nextec Laser Metrology LLC    Eastlake, OH 44095
Aug 06, 2012 Increasing QC process speed and precision for manufacturers, WIZinspect 3D multi-position laser inspection solution performs part alignment, inspects all required dimensions, and delivers detailed reports of measured dimensions. Success/failure output is also produced based on relevant part tolerances. System supports integration with factory floor automation, providing in-process, turnkey inspection solution that delivers total precision of less than 14 microns.

Nova Measuring Instruments Inc.    Sunnyvale, CA 94085
Jul 19, 2012 By allowing accurate measurement of critical TSV features such as side-wall angle, bottom diameter, and bottom curvature, Nova V2600(TM) helps accelerate development and improve production yield of multi-chip integrations that rely on TSVs (Through Silicon Vias). Process control solution delivers complete TSV dimensional metrology in production-ready system for industry's transition to 3D integration in production. Spectral method can be extended to future TSVs with diameters below 5 microns.

Viztek, LLC    Garner, NC 27529
Jul 16, 2012 Integrating DR or CR solution and PACS, Opal-Ortho PACS solution controls every aspect of orthopedics imaging. Single appliance, suited for practices of all sizes, can house 100,000 imaging studies and offers opportunity to integrate mobile devices for displaying images to patients/colleagues. While digital templating provides calculations to help create precise surgical plans before operating, automatic learning protocol optimizes system functionality to doctor's usage patterns.

Opgal Ltd    Karmiel 20101  Israel
May 24, 2012 Equipped with continuous zoom lens ranging from 25-225 mm, EyeSec(TM) Zoom 225 provides human detection range of over 5 km. Uncooled 640 x 480 resolution detector with 17 µm pitch provides detailed picture, offering visual assessment tool for range of perimeter and homeland security applications. Secured inside ruggedized enclosure, IP66-rated camera can withstand harsh weather and environmental conditions, including rain, direct sunlight, high humidity, and dust.

Hexagon Metrology Inc.    North Kingstown, RI 02852
May 01, 2012 Pre-configured with touch-probe for multi-sensor measurement, Optiv® Classic 321GL tp is used for inspection of complex, densely populated features of precision parts. Benchtop unit's 6.5x motorized CNC zoom optics deliver accuracy levels approaching 2 microns, while calibrated lighting, hi-resolution color CCD camera, laser locator, and 8-segment LED dual angle ring light are optimized for edge detection. Other features include RGB sensitivity controls and image processing software.

Toshiba America Electronic Components (TAEC)    Irvine, CA 92618-1811
Mar 16, 2012 Reducing installation time with incorporation of remote optical zoom and one-touch remote focus, IK-WR14A two-megapixel IP network dome surveillance camera captures 1080p full HD resolution video at 30 fps. Cable management system, based on PoE, consists of single Ethernet cable for power, control, and data transfer. ONVIF compliant and vandal resistant, the camera's SRLED technology and IR filters provide clear night vision and removal of unnecessary colors.

Broadcast Pix    Billerica, MA 01821
Mar 01, 2012 Granite(TM) and Mica(TM) are available with Video Control Center(TM) v3.0, which offers touchscreen production control, voice-automation control of switching and graphics, customizable virtual sets, and automated, dual-channel graphics. Further promoting production control, software supports Fluent Rapid CG(TM) 2 solution that integrates databases, RSS feeds, and custom action buttons into templates to streamline creation of data-intensive CG graphics.

Steinbichler Optotechnik GmbH    Neubeuern   Germany
Dec 05, 2011 With BLUE-LED technology and max measuring field of 500 mm, COMET L3D 5M provides 3D data acquisition, recording up to 5M measuring points. Portable unit can capture surface detail of highly structured components. Dust-proof optical components enable use in industrial environments, while contact-less measuring principle allows measurement of delicate objects. COMET L3D 5M is particularly suitable for quality control and inspection of small- and medium-sized plastic and metal parts.

Flexible Picture Systems    Richmond Hill   Canada
Nov 30, 2011 Optimized for Edge Blending applications that do not require geometry correction for curved surfaces, IA-200_EB lets AV integrators create seamless, invisible blends with off-axis projectors. Keystone Correction and Edge Blending features aid flexible projector placement, while included Edge Blending Utility software enables control of multiple projectors for Projector Wall applications of any size. Along with up to 2K resolution, scaler supports multiple control options and HD-SDI.

Flexible Picture Systems    Richmond Hill   Canada
Sep 19, 2011 Based on video scalers with Geometry Correction and Edge Blending, Image AnyPlace-3D creates fully immersive, passive 3D viewing that can be scaled to fit any projection screen size and accommodate any number of viewers. Passive system utilizes separate and simultaneous polarization for each eye for comfortable viewing experience. Kit includes 2 signal processors, HDMI distribution amplifier, HDMI cables, polarizing filters and glasses, IR remote control, and rack mounts.