Gamma Scientific
San Diego, CA 92123 1876
Sep 12, 2008 Designed for cockpit display backlights where lighting changes from tungsten and fluorescent to solid-state LEDs, RS-5NVIS Digital Light Source tests and calibrates ANVIS radiometers and spectroradiometers. It features light level setting to 1 part in 65,535 in absolute, NIST-traceable, ANVIS radiance and luminance units, as well as linearity deviation of less than 0.25% rms. Unit is equipped with manual control and ASCII computer interface control via built-in RS-232 port.

Lumitex, Inc.
Strongsville, OH 44136
Aug 20, 2008 Available in 5.8 x 3.5 x 2.8 in. portable package weighing 2.2 lb, LumitexMD(TM) BRICK medical grade light source uses 24 W Solarc® high-intensity arc lamp to provide white light for surgical site visualization. Unit comes with ACMI connector, common international power plugs, and mounting clamp for attachment to IV pole or surgical table accessory side rail. Light source can be used in combination with LightMat®, VersaLight®, or headlight in surgical centers.

Seoul Semiconductor
Geumcheon-Gu 153-801  Korea (south)
Aug 07, 2008 With life expectancy that exceeds 50,000 hrs, Models CAWT722-S and CWT722-S LEDs have high color rendering index (CRI) and are suited for indoor lighting. Warm white Model CAWT722-S has CRI of 96 and achieves 68 lm/W, while pure white Model CWT722-S has CRI of 92 and produces 70 lm/W. Both models measure 6.0 x 5.0 x 2.5 and have viewing angle of 120°.

McPherson, Inc.
Chelmsford, MA 01824
Aug 01, 2008 With ability to test varied long- and short-wavelength UV regions, Ultraviolet Photon Excitation system provides in-laboratory access to vacuum-ultraviolet for material analysis, spectral calibration, and photo-excitation spectroscopy. It combines properties of computer optimized, all-reflective, spectrally tunable monochromator with MgF₂ window Deuterium and/or windowless hollow cathode light source. Light source emission wavelengths include 30.4, 58.4, 73.7, 102, and 121.6 nm.

Energetiq Technology
Woburn, MA 01801
Jun 27, 2008 Incorporating light collection optics and power supply, EQ-1000 LDLS(TM) Laser-Driven Light Source uses sealed Xenon gas bulb and can be configured for broad spectrum output in UV-VIS spectroscopy, biological imaging, circular dichroism spectroscopy, and general scientific research.

TOFRA, Inc.
Palo Alto, CA 94303
Jun 06, 2008 RGB LED Light Source enables independent control of red (619 nm), green (515 nm), and blue (465 nm) LEDs to create any desired color, including white light, for visual observation. Color images can be produced from monochrome cameras, giving full non-interpolated color at every pixel. Light source head mounts instead of condenser on upright microscopes and does not create any vibration or noise. Light source controller connects to computer serial or USB port.

LUXIM Corp.
Sunnyvale, CA 94089
May 19, 2008 Solid-state light source, LIFI(TM) STA-40-01, has compact, directional beam with CRI of 95 that promotes light distribution. Source is rapid on, rapid restrike, dimmable, and remotely addressable. These features enable energy-saving modes such as daylight harvesting, occupancy sensing, and demand response dimming. Retrofitting into existing fixtures, source delivers 22,000 lumens with 120 lumens/W source efficiency and 30,000 hr life.

Optek Technology, Inc.
Carrollton, TX 75006-6905
May 13, 2008 RoHS-compliant OPA80 and OPA83 Series near-infrared light sources are available with ring sizes from 0.625 in. ID/1.25 in. OD to 1.25 in. ID/2.25 in. OD. Typical forward voltage is 1.35 VF, reverse voltage per emitter is 2.0 V, with continuous forward current of 50 mA and peak pulsed forward current of 1.0 A at 1% duty cycle. Series OPA80 12 V light ring comes with ambient light sensor to minimize current consumption, while Series OPA83 5 V light ring comes without sensor.

Medit, Inc.
Winnipeg, MB R3C2B3
Mar 24, 2008 Offering alternative to halogen and metal halide light sources, portable Superbright LED Light Sources offer low-power 3 W LED element with super-magnifying lens, allowing average of 28,000-46,000 Lux and over 1,000,000 hours of lamp life per source. Available with either ACMI or STORZ threading, units are suitable for variety of medical, veterinary, and industrial endoscopes, fiberscopes, and borescopes.

Data Display Products
El Segundo, CA 90245 4630
Mar 24, 2008 LED Lighting Assembly is low-profile LED light source that provides task lighting in surgical fluid and blanket warmer, keeping materials at consistent temperature. Able to withstand maximum ambient temperature of 200°F, LED assembly reduces fluid warmer's power consumption and enables thermal control by eliminating temperature spikes. System utilizes surface mount technology and can be designed for a wide range of applications.

NovaTech, Inc.
Smithfield, RI 02917-1205
Jan 17, 2008 NovaTech Universal LED Ring Light features 60 super bright LEDs, aligned in 2 row pattern, angled to fully illuminate work space, and mounts onto micro- and laser-welding microscope using 3 thumb screws. It includes 110 Vac power supply with variably adjustable brightness and flexible cord. Color temperature is 6,400 K , rated lamp life is 17,000 hrs, and unit is supplied with adaptor that fits most Olympus SZ and Nikon SMZ Series fixed microscope heads.

JDSU
San Jose, CA 95131
Oct 19, 2007 Offered in 2 models, TLS-55 Smart Optical tester is designed for channel routing applications, such as wavelength tracking, in ROADM networks. Features include adjustable output power level, power supply management system with 3-way powering, and USB port for remote operation. While TLS-55C covers all ITU-T frequencies from 1528.384-1563.863 nm based on 50 GHz grid, TLS-55L complementary laser source addresses applications in L-band form 1570.42-1608.76 nm.

LEDtronics, Inc.
Torrance, CA 90505
Oct 03, 2007 Powered by 3 replaceable AA-cell batteries, Flashing LED Chevron Arrow Mat runs for 72 hr in arrows-sequentially-flashing mode, 48 hr in arrows-flashing-in-unison mode, and 6 hr in arrows-always-on mode. This portable safety light source has 8 magnetic pads for attachment to ferric-metallic surfaces and eight ½ in. eyelets for fasteners. Uses include warning sign for delivery-service loading/unloading, traffic director for road detours, and roadside-emergency traffic diverter.

Lenox Instrument Co.
Trevose, PA 19053 3427
Jul 13, 2007 Adaptable to most fiber optic illuminated borescopes, fiberscopes, and videoscopes, cordless Model 3000LS-3.5LED operates on 3 C-cell batteries for 24 hours before new alkaline or rechargeable batteries are needed. Illumination is delivered by 5,000-6,000° Kelvin LED light, which produces up to 110,000 lux at input to light guide. Weighing 1.4 lb with batteries installed in 11 in. handle, light source offers shock and impact resistance.

Energetiq Technology
Woburn, MA 01801
Jul 12, 2007 Saturn(TM) DUV (Deep Ultra Violet) Lamp Subsystem offers an operating wavelength range of 170-400 nm to eliminate electrical/heat damage in thin-film and surface processes. System features include compact housing, debris-free electrodeless toroidal bulb design, integrated power supply, internal water cooling, and re-circulating nitrogen cooling to avoid toxic ozone production. Light source is suitable for photoprocessing and cleaning applications.

Fujikura Europe Ltd, Fibre Optics Division
Chessington, Surrey KT9 2NY,  United Kingdom
Apr 05, 2007 Used in conjunction with optical power meter, FLS-20T measures optical power loss over fibre network. Hand-held, battery-operated, dual laser light source can operate at 1,310 and 1,550 µm and can incorporate selectable modes of signal from continuous wave light and modulated tones of 270 Hz, 1 kHz, and 2 kHz. Also available, FVI-01 miniature, keyring-size, battery-operated red laser light source is used to identify faults, bends, breaks, and low-quality splices or connections.

BEA Lasers
Elk Grove Village, IL 60007
Mar 06, 2007 Available with choice of 60 mm ID adjustable ringlight or 18 in. dual chrome goosenecks with spot lens, stackable Model BEA-150 provides consistently adjustable illumination in laboratory or inspection environments. Cold light source, compatible with existing illuminators and microscopes, incorporates switching 115/220 Vac power supply as well as on/off switch separate from rheostat intensity control. Removable front panel assembly facilitates lamp and filter replacement.

Optometrics LLC
Ayer, MA 01432
Dec 26, 2006 Featuring Windows® XP compatible, software controlled wavelength selection from 360-1,000 nm, TLS Series is suitable for detector sensitivity testing, color matching and characterization, and for testing reflectivity and absorption of different materials. Monochromator includes USB interface and 60 in. long fiber cable output with SMA adapter. It offers choice of 6, 10, and 25 nm bandpass output for users who need to illuminate specific wavelengths.

Gigaphoton Inc.
Tochigi-ken 323-8558  Japan
Dec 15, 2006 With 193 nm emission wavelength and 6,000 Hz repetition rate, 60 W argon fluoride Model GT61A is designed for lithography tools with numerical apertures of 1.3 and higher. Excimer laser light source achieves spectral bandwidth of 0.35 pm and includes measuring instrument and stabilization mechanism, which allows stable spectrum performance during system's entire lifetime.

PerkinElmer, Inc., Optoelectronics Headquarters
Fremont, CA 94538-3180
Nov 09, 2006 Trim Xe(TM) line is available in various sizes and power levels with lamp diameters as small as 1.3 mm to meet demands of digital photography applications. Intense, short light discharge freezes motion, lights objects at long distances, and provides clear photos without need for brightness modification, contrast correction, or image stabilization. Xenon Flash technology enables uniform light distribution and color temperature close to natural sunlight.