Spectra-Physics, Inc.    Mountain View, CA 94043
May 16, 2013 Combining laser resonator and control electronics in single housing, Explorer One 349-120 delivers pulse energy of greater than 120 µJ at 1 kHz repetition rate with pulse width of less than 5 ns, while Explorer One 355-300 delivers more than 300 mW output power at 50 kHz repetition rate with pulse width less than 8 ns. Units have low pulse energy noise of less than 2% and 3%, respectively. Weighing less than 1.5 kg, DPSS lasers are suited for micromachining and bioinstrumentation applications.

Spectra-Physics, Inc.    Mountain View, CA 94043
May 16, 2013 Ultrafast laser system, combining automated Spirit™-OPA (optic parametric amplifier) and Spirit 1040-4 or 1040-8 industrial-grade femtosecond laser, tunes virtually gap-free from mid-IR to deep ultraviolet (DUV), from 16 µm to 210 nm, and offers user-adjustable repetition rates from tens of kHz up to 1 MHz. Functionality serves such time-resolved spectroscopy applications as single molecule studies, nonlinear optics, and fluorescence lifetime measurements.

Spectra-Physics, Inc.    Mountain View, CA 94043
May 15, 2013 Producing >45 W (225 µJ), Quasar® 355-45 features TimeShift™ technology for pulse shaping and burst-mode operation as well as programmable pulse widths from <5 ns to >100 ns over repetition rates from 0–1 MHz. This UV laser is suited for use in precision manufacturing of microelectronic devices and components. Also available, Quasar 532-75 features >75 W (375 µJ) green output. This platform combines fiber laser, power amplifier, and harmonics technologies to optimize performance.

Spectra-Physics, Inc.    Mountain View, CA 94043
May 15, 2013 Combining laser resonator and control electronics in one housing, Explorer® One™ comes in versions with wavelengths of 349 and 355 nm, weighs less than 1.5 kg, and withstands shock and vibration with accelerations of up to 100 g. Explorer One 349-120 delivers pulse energy of >120 µJ at 1 kHz repetition rate, while Explorer One 355-300 delivers >300 mW output at 50 kHz repetition rate. Respectively, lasers have <5 and <8 nsec pulse widths and pulse energy noise of <2% and <3%.

Spectra-Physics, Inc.    Mountain View, CA 94043
May 10, 2013 With more than 10 W average power, Spirit™ ps 1040-10 is suitable for semiconductor and LED manufacturing, flat panel display processing, thin film ablation, and nano structuring. Laser delivers beam quality of M2<1.2, stability of less than 1% rms over 100 hours, and short pulse width of 13 ps. Providing user-adjustable repetition rates from single shot to 1 MHz, system includes integrated pulse picker for fast pulse selection and control.

NP Photonics, Inc.    Tucson, AZ 85747
May 09, 2013 Offering users turnkey, ultra-broadband, IR source, SpectraChrome™ laser delivers supercontinuum spectrum from <1,000 nm to >4,500 nm. This quasi-continuous wave, 30 MHz system produces picosecond pulses suited for time-resolved metrology. Fiber-delivered output facilitates integration into any tool or research environment.

Spectra-Physics, Inc.    Mountain View, CA 94043
May 02, 2013 Excelsior® One™ series is based on It’s In the Box™ design, where laser cavity and control electronics are integrated into single package. Available wavelengths include 515 and 553 nm, which deliver 50 mW, and 594 nm, which provide 100 mW. Delivering TEM00 mode quality, series includes direct diode and diode-pumped solid-state (DPSS) technology in consistent, compact footprint with common electronics interface. All models are equipped with RS 232 software interface.

OFS, Specialty Photonics Division    Avon, CT 06001
May 01, 2013 Rated at 500 W, TrueMode-15™ supports up to 36 pump laser diode inputs, within typical 0.15 NA. TrueMode-22™, targeted for 1 kW applications and beyond, supports up to 18 pump laser diode inputs, within typical 0.22 NA. Both single-laser cavities are compatible with OFS' TrueM2™ Beam Combiners, which can combine multiple laser cavities.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Apr 10, 2013 Offering 33 W of output at 355 nm, AVIA™  355-33 Micromachining Laser includes ThermEQ™, PulseEQ™, and PulseTrack™, which enable precise control of delivered pulse energy, allowing OEM to define and optimize laser process. Laser also has automated harmonic crystal shifter to maintain constant output power for more than 20,000 hours. With Posilock™ beam position sensor and feedback loop, AVIA 355-33 provides optimal beam position stability over lifetime.

EXFO    Quebec G1M 2K2  Canada
Mar 25, 2013 Housed in IQS-636 platform, IQS-2800 ITLA Tunable Laser Source offers modular test solution that enables researchers and engineers to design and test future ultra-high-capacity network architectures. Lasers are tunable over C and L bands with 10 pm resolution. Providing up to 15.5 dBm of power, IQS-2800 is suitable for various applications, such as coherent/OFDM transmission and WDM network emulation.

Furukawa Electric    Tokyo   Japan
Mar 20, 2013 Featuring 1,420–1,460 nm wavelength range and ±1.5 nm wavelength accuracy, FOL 1437 series offers optical output of ~500 mW and total power consumption of 13.5 or 16 W. Maximum ratings, depending on model, include LD current of 1,700 or 1,800 mA, LD voltage of 2.3 or 2.4 V, TEC current of 3 A, and TEC voltage of 3.5 or 3.8 V.

Edmund Optics    Barrington, NJ 08007
Mar 13, 2013 Designed for OEM and scientific applications, Coherent® High Performance OBIS™ Laser Systems include 19 models that offer same compact design for all wavelength options to promote flexibility and design synergy. Lasers provide wavelengths from UV–NIR on single platform, and each uses Optically Pumped Semiconductor Laser (OPSL) or laser diode-based technology. Providing circular beam, systems have controller integrated into laser head and offer USB, RS-485, and full I/O interfaces.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Mar 12, 2013 Delivering average power of 25 W, Talisker 1000 Series is suitable for precision materials processing applications. Lasers are available in 3 single wavelength versions of 1,064 nm, 532 nm, and 355 nm. Near IR version is suitable for scribing and engraving stainless steel and other metals, while green wavelength delivers higher precision for high value exotic metals. UV wavelength is optimal for processing glass and other transparent or brittle materials.

IPG Photonics Corp.    Oxford, MA 01540
Mar 07, 2013 Based on single-mode fiber modules, 1,060 nm YLS-xxx-Y13 Series provides estimated mean time of uninterrupted operation of 3+ years. Kilowatt class units include modular digital power supplies with redundancy, digital laser diode current drivers, and hermetically sealed multichannel beam switches. Control system allows integrated control of both laser and process subsystem. Housed in sealed cabinet for extreme conditions, lasers offer process heads for welding, cutting, and remote welding.

BEA Lasers    Elk Grove Village, IL 60007
Feb 28, 2013 Offered in 650 nm (red) or 532 nm (green) laser light, MIL Series is optimized for heat dissipation and durability and comes with 12 mm connector fitted to black, zinc-coated, stainless steel laser diode housing. Turnkey laser system is also available with choice of optics – standard round, line, cross, or target – and black, PVC-coated, 2 m cable with straight or 90° connector. Other features include 3.3 Vdc switching power supply and mounting bracket option.

Epilog Laser Corp.    Golden, CO 80403
Feb 20, 2013 Laser Fusion is CO2 system for engraving and cutting on variety of materials, while FiberMark Fusion accommodates more industrial applications involving bare metals and engineered plastics. In addition to 32 x 20 in. engraving table, both lasers feature motion control system that accelerates engraving while promoting cutting quality. Other features include joystick control, job management software, industrial DC brushless servo motors, tempered glass door, and LED lighting.

Spectra-Physics, Inc.    Mountain View, CA 94043
Feb 12, 2013 Combining advanced fiber laser, power amplifier, and harmonics technologies, Quasar® delivers 40 W UV power at high repetition rates for high-throughput, precise micromachining. TimeShift™ technology provides programmable pulse profiles for optimal process flexibility and control. Built for 24/7 long-term operation, laser is built for continuous operation in demanding manufacturing environments and is also available with green output of greater than 70 W.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Feb 12, 2013 Producing TEM00 (M² <1.3) output beam, Daytona™ 355-20 delivers over 20 W of power in sub-nanosecond pulses, at repetition rates over 1 MHz at 355 nm. Platform can be adjusted to match exact needs of particular application. For example, pulsewidth can be adjusted from <1 ns to 20 ns, while repetition rate can go from single shot to over 2 MHz. Applications include wafer dicing, scribing, and drilling; glass scribing for touch panels and LCDs; and thin film scribing for PV manufacturing.

Den-Mat Corporation    Santa Maria, CA 93455
Feb 11, 2013 With internal battery, SOL™ Soft Tissue Laser allows clinician to move between operatories for over 3 hr without plugging in cord. Fiber spool cord management ensures unwanted lengths never interfere with procedures, while blue aiming beam contrasts with tissue to optimize visibility. To minimize hand fatigue, ergonomic handpiece provides optimal posterior access in multiple positions. Applications range from gingival contouring and tissue retraction to laser-assisted periodontal therapy.

Multipix Imaging Ltd.    Bedford Road   United Kingdom
Feb 11, 2013 Designed for seamless integration into existing systems, 19 mm dia 3D PRO™ Laser and 10 mm dia 3D PRO™ Laser Mini feature cylindrical form factor and are both available either as customer-specified fixed focus module or with adjustable focus. Lasers deliver uniformity with line widths from 30–120 µm, and modules are available with output powers from 1–150 mW, fan angles between 10° and 90°, and wavelengths from 450–910 nm. Several electronic options are also available.