Laser Devices, Inc.    Monterey, CA 93940
Feb 15, 2011 Manufactured from hardcoat anodized aluminum, DBAL-I2, EOLAD-1I, and ITAL-/OTAL-Classic are waterproof and meet MIL-STD-810G for adverse environmental conditions. Eye-Safe models are powered with FDA Class I, IR laser pointer for use with night vision equipment. DBAL-I2, Dual Beam Aiming Laser-Intelligent, is equipped with Class IIIa visible red or green laser pointer and Class I IR laser pointer, while EOLAD-1I combines IR laser pointer with L-3 EOTech 552 Holographic Weapon Sight.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Feb 09, 2011 Offering plug-and-play operation, OBIS(TM) lasers are based on direct diode and optically pumped semiconductor laser technologies. Power rating range up to 100 mW and all control functions are integrated within 1.5 x 1.57 x 2.76 in. laser head. Models are available in wavelengths covering UV through NIR - 375, 405, 445, 488, 640, 660, and 785 nm - all with circular TEM00 output beam. Design also permits direct digital and analog modulation up to 150 MHz.

Meta Vision Systems Inc.    Montreal, QC H4S1M5  Canada
Feb 04, 2011 Designed to optimize speed and accuracy of submerged arc welding in longitudinal pipe mills, VistaWeld integrates Smart Laser Sensor head within VistaWeld architecture based on Ethernet backbone and Ethernet IO board. TruRoot tracking finds actual root of joint for OD SAW, even though root may be covered by tack weld. Standard tracking feature uses look-ahead distance, welding speed, and other information to determine correct position for welding head at all points along pipe.

VibrAlign, Inc.    Richmond, VA 23236
Feb 04, 2011 Featuring 4 in. color screen, Fixturlaser GO Pro is intended for anyone works with or maintains/services rotating machinery. Verizontal Compound Move function suggests how to correct shaft alignment vertically if values are out of tolerance, and then user can proceed to horizontal adjustment where live values are displayed during entire adjustment. Depending on measurement results, adaptive user interface guides user throughout alignment process.

Pranalytica Inc.    Santa Monica, CA 90401
Jan 20, 2011 MULTILUX(TM)-20-40-46-CW features one SWIR and 2 MWIR collinear and collimated laser outputs. It provides greater than 1.2 W continuous wave, room temperature (CW/RT) power at 4.6 µm, greater than 0.4 W at 4.0 µm, and greater than 3 W at 2.1 µm. Collinearity between combined laser outputs at 3 wavelengths is better than 1 milliradian, and power output at each laser wavelength can be individually controlled and modulated with arbitrary pulse sequences. Air-cooled laser head weighs less than 10 kg.

Spectra-Physics, Inc.    Mountain View, CA 94043
Jan 19, 2011 Combining head and power supply in single package, Mosaic(TM) 532-11 integrates into machine tools and onto gantry systems. Unit has short pulse widths of less than 15 ns and can operate at high repetition rates while minimizing undesirable thermal effects. Featuring near- and far-field beam-pointing stability as well as pulse-to-pulse stability, laser is suited for microelectronics and photovoltaics manufacturing as well as other processes that require 24/7 operation.

Pinpoint Laser Systems    Peabody, MA 01960
Jan 10, 2011 Designed for Laser Microgage measuring and alignment system, Capture Software allows operators to grab measurement readings from 4 remote laser receivers to analyze alignment and performance of production machinery and industrial equipment. Windows-based application records incoming readings, displays results, and interfaces with spreadsheets and statistical analysis packages. Together, Laser Microgage and Capture deliver precision of 0.0001 in. over working range of 180 ft.

Hamilton Thorne, Inc.    Beverly, MA 01915
Dec 13, 2010 Able to accommodate research applications in developmental and advanced cell biology, Stiletto(TM) laser can automate manual process of separating and removing unwanted cells. In addition to being able to gently sweep aside cells from beam of laser without burning/cauterization, laser's capabilities and functionality combine to let users obliterate unwanted cell colonies as well. Unit combines laser and objective, controller software, and automated stage.

Newport Corporation    Irvine, CA 92606
Dec 06, 2010 Combining laser head and electronics into single package weighing less than 3 kg, 5 W Explorer® XP 532-5 features air-cooled design, with thermal management of less than 100 W under normal operating conditions. Green Q-Switched laser operates across wide repetition rate range from single shot up to 300 kHz for high-throughput micro-machining. Designed to withstand harsh environments, laser is suited for LED chip marking, resistor trimming, LIDAR, and thin film PV manufacturing.

Pinpoint Laser Systems    Peabody, MA 01960
Dec 03, 2010 Designed to facilitate alignment of rollers, idlers, take-up reels, shafts, and web handling systems, Microgage Roll Alignment Kit provides precise measurements of roll position and orientation on production lines of all sizes. Laser transmitter projects straight, visible reference line that can be directed into production line, while digital receiver reads roll's position relative to centerline of laser beam. Display unit can upload readings to computer.

Power Technology, Inc.    Little Rock, AR 72219 1117
Nov 12, 2010 Capable of output powers from 150 mW to 8 W with wavelength range between 635 and 1064 nm, MK(TM) Series features electronics and beam quality that enables drop-in replacement for most existing machine vision lasers. Cooling methods keep laser diode at constant temperature, while customizable optics allow for optimal performance at close or long range. Fiber coupled laser module, capable of operating in CW mode, TTL, or analog modulation, also includes power and temperature adjustments.

Power Technology, Inc.    Little Rock, AR 72219 1117
Nov 12, 2010 Able to serve as drop-in replacement for most existing machine vision lasers, PNF(TM) laser module delivers 0.1-200 mW of output power with wavelength range from 375-2,330 nm. It exhibits wavelength and optical power stability and supports CW, digital, or analog modulation up to 100 MHz. Along with uniform intensity (non-Gaussian) line generators, module features Variable Focus(TM) Technology that lets user calibrate focus of module and re-tune line generator for optimal performance.

Pinpoint Laser Systems    Peabody, MA 01960
Nov 08, 2010 Consisting of cylindrical laser that can be adapted to bores of all sizes, Microgage Bore Alignment Kit projects laser reference beam to digital receiver that is held in mount with similar precision bore diameter. Measurement readings as small as 0.0001 in. are transmitted to handheld display to define bore or shaft's alignment and guide user to what changes are needed. Using computer interface, Microgage can store readings and connect to common programs and spreadsheets.

Bosch Production Tools    Mount Prospect, IL 60056
Nov 01, 2010 Utilizing Bosch patented Cone Mirror Technology, GLL3-80 delivers full 360° coverage on 2 perpendicular vertical planes and one horizontal plane. Provision of 5 cross points and self-leveling lines in 360° facilitates layout, leveling, and squaring processes. Combined with ability to project 3-axis planes simultaneously in all directions, functionality to switch between triple axis-plane, vertical-only, and horizontal-only modes lets user complete entire room from one setup point.

Behringer Saws, Inc.    Morgantown, PA 19543
Aug 27, 2010 Designed to be used on Behringer sawing systems which have handling components to move materials into work area, Laser Length Measuring System helps conserve time and eliminate waste by confirming material dimensions. Mounted laser unit automatically detects material and sends overall dimensions to control panel. Once reset to zero, readout on operator's control will measure length of part being moved forward toward laser via powered roller conveyors or other conveyance system.

American Laser Enterprises, Inc    Novi, MI 48376
Aug 19, 2010 With A-Las(TM) System, users can align complex laser beam delivery systems in seconds from any location worldwide for numerous machines. System eliminates trial and error troubleshooting, minimizes parts consumption, and maximizes machine uptime while enabling one person to diagnose and correct multiple machines.

DEKA Laser    Firenze   Italy
Jul 26, 2010 With average power of 50 W, SmartXide DOT HP can attain irradiance of up to 250 W with each pulse. This enables aesthetic physicians to attain peak powers needed for safe, effective, and comfortable deep wrinkle reduction treatments. Combined with Smart Pulse Technology, laser offers independent modulation of both energy and dwell time to serve range of treatments. Operators can control depth of tissue treated along with degree to which tissue is treated.

Hilti Inc.    Tulsa, OK 74121
Jul 26, 2010 Hilti PMC 46 Combilaser features Hilti Pulse Power(TM) technology, that allows accurate measurements, and 20 hr battery life. System has Impact Protection System and rubberized drop points for durability and support of harsh worksite conditions. Also included are PMA 78 universal adapter, wall mount, ceiling clamp, magnetic bracket, and drywall stand along with compact tripod.

LIMO    Dortmund   Germany
Jul 02, 2010 Combined with IOS00019x-series processing head, LIMO120-F400-SL808-103 generates photoluminescence and thermographic signals, and asymmetric homogeneously illuminated field under 35° angle of incident that fits to solar cell sizes up to 210 x 210 mm. Center wavelength of 7908-808 nm is essential for separation of excitation source and signal light, while small bandwidth versions of less than 1 nm are also available as option.

Pinpoint Laser Systems    Peabody, MA 01960
Jul 01, 2010 Providing useful alignment information for evaluating and correcting machinery alignment problems, 4-axis Microgage Receiver measures two linear axes X and Y and their two angular components yaw and pitch. It delivers measuring precision of 0.0005 in. and 0.005° and features compact, digital display for precise linear and angular readings. Unit is suited for aligning lathes, turning centers, spindles, moving linear slides, rams and pistons, and injection molding machinery.