Optics & Photonics ->
Optical Transmission Equipment & Systems ->
Fiber Optic Equipment & Systems ->
Fiber Optic Transmission Systems ->
(Showing headlines 1 - 20) more ....
Open Pin Field Arrays deliver high-speed performance.
New Albany, IN 47151 1147
Jul 08, 2013
High-density LP Array™ (LPAM and LPAF Series) supports high-speed applications that require reliable, high-pin count solutions in low-profile design. Available in 4, 4.5, and 5 mm mated heights with up to 180 total pins in 4 or 6 row configurations, arrays feature dual wipe contact system on 1.27 x 1.27 mm pitch grid for maximum grounding and routing flexibility. Lead-free solder crimp terminations facilitate processing, and tin-lead solder crimp is also available.
Multiplexer Appliance supports OC-3 and STM-1 standards.
Sangoma Technologies Corp.
Markham, ON L3R 9R6 Canada
Sep 05, 2012
Providing up to 84 T1 spans or 63 E1 spans, Model STM1-Mux offers capacity to connect 2,016 simultaneous calls. Unit supports direct cable connection with A116 high density digital telephony board, eliminating cross-connect wiring for each group of 16 E1/T1 spans terminated in high-density deployments. Combined with other Sangoma solutions supporting SS7 and SIP signaling and multiple transmissions standards, STM1-Mux can form complete platform to support many business applications.
Scalable Fiber Optic Simulator features removable modules.
M2 Optics, Inc.
Holly Springs, NC 27540
Aug 27, 2012
User-configurable for applications such as physical network emulation and equipment certification, Fiber Lab Flex(TM) Optical Fiber Testing Platform consists of one 19 in. rack mountable instrument that accepts up to 10 removable modules. Each module can be filled with up to 10 km of any fiber type or brand and supplied with any standard connector. This allows for mixing of different lengths while yielding repeatable results. Fully loaded module weighs 4.75 lb and measures 9.5 x 1.5 x 11 in.
Fiber Optic Multiplexers operate in UV region of spectrum.
Axiom Analytical, Inc.
Irvine, CA 92714
Mar 21, 2011
Providing rapid switching between single UV spectrometer and up to 16 sampling points, FMX-200U Series is suited for pharmaceutical dissolution monitoring as well as analysis of aromatic compounds and other strongly absorbing chromophores. Multiplexers utilize pair of retro-reflecting switching prisms to switch both transmitted signal from spectrometer and signal returning to optical detector. Units can be controlled from remote computer via RS-232, RS-422, or RS-485 port.
Optical Communications Switch/Multiplexer suits extreme environments.
Schweitzer Engineering Laboratories Inc.
Pullman, WA 99163
Jun 09, 2010
Able to operate as OC-48 SONET multiplexer and/or GbE switch, SEL ICON (Integrated Communications Optical Network) features precise time distribution accurate to 1 µs over WAN. It also offers real-time latency monitor for each channel and support for SONET, Ethernet, and DS0 interfaces such as C37.94 and EIA 232. Product can be managed from one or several locations and is available in 19 in., shelf-mount package and 8 in. DIN-rail or panel-mount package.
Multiplexers target high-density CCTV applications.
Danbury, CT 06810
Jun 01, 2009
Available for use over multimode or single mode optical fiber, F32V8DT/R(M)(S)1 Series video/data multiplexer transmitters/receivers support 32 channels of video with 8 channels of bi-directional serial data. Units offer 10-bit RS250C Short-Haul Quality video performance and can transport video up to 20 km between locations. Series is suited for applications such as airports and parking garages, which require large number of CCTV cameras and may have remote control center.
CWDM Optics expand existing fiber capacity.
Suwanee,, GA 30024
Apr 16, 2008
With 1 GHz CHP CORWave, MSOs can leverage existing fiber networks for delivery of HD-On-Demand, SDV, and business services. When deployed with ARRIS OptiMax4100 4 x 4 segmentable nodes, CORWave enables multiplexing of 12 wavelengths: 4 forward, 4 return and 4 bidirectional, all on one fiber with link length of up to 25 km. When deployed with ARRIS OptiMax segmentable nodes in 2 x 2 configuration, CORWave enables longer link lengths of up to 30 km.
SAN Array can support up to 60 TB of data.
Thomasville, NC 27360
Jan 31, 2008
Designed to meet storage needs of SMBs, Model AX4-5 storage area network (SAN) array supports up to 64 hosts and 60 drives across 5 enclosures. Array can be configured for Fibre Channel or iSCSI networks, supports mixed drive configurations to suit customer-specific needs, and protects data in controller, on drive, and throughout data path. It comes with EMC Navisphere Express intuitive user interface that facilitates installation and operation.
Gigabit Passive Optical Network Devices suit FTTU applications.
Paris 75008 France
Jul 24, 2007
Allowing carriers to deliver triple play services, 7342 ISAM fiber-to-the-user solution Rel 4.4 features multiple dwelling unit optical network terminal that provides voice, video, and data over building's copper wires. Line card has four GPON ports, each of which can support up to 64 subscribers with 2.5 Gbps downstream and 1.25 Gbps upstream line rates. Optical network also supports VoIP with SIP and H248 and IPTV with IGMPv3 for TV channel change.
System provides carrier Ethernet transport solution.
Milpitas, CA 95035
Jun 28, 2007
Consisting of OpVista2000 TR-110 GbE muxponder, TR-71 10GbE transponder, and Layer 2 functionality, EtherWave(TM) meets network requirements for Ethernet architectural and operational efficiency by combining 10 GbE client side signals into one 10-G ITU-compliant DWDM wavelength on network side. OpVista can handoff 10GbE signal to router located in central office or hub node facility, with individual GbE streams tagged separately to allow distribution to appropriate service.
SFP Transceivers help connect SANs remotely.
Chatsworth, CA 91311
Dec 14, 2006
Covering distances of 10, 40, 80 km, fibre channel CWDM and DWDM interfaces support multi-rate operation at baud rates of 4.25, 2.125, and 1.062 Gb/s, respectively, and Ethernet rate of 1.25 Gbps. CWDM family is available in 18 wavelengths ranging from 1270-1610 nm, while DWDM family supports 46 channels in C-band, from ITU channel 15 through 61.
Fiber Optic Products suit military/industrial applications.
Etters, PA 17319
Oct 09, 2006
Based on Canstar(TM) technology, FCI Fiber Optics product line is comprised of fiber optic multimode/single-mode couplers, splitters, taps, wavelength division multiplexers (WDMs), cable assemblies, and adaptors. Couplers are offered for various design specifications, including one-in, many-out couplers; WDMs; and one-in, 2-out couplers available as even- or ratio-split. FCI attenuators, or one-in, one-out couplers for attenuating all wavelengths, are also available.
Fiber Frame System delivers modular, scalable, FTTx solution.
APA Cables & Networks Inc.
Plymouth, MN 55442
Sep 27, 2006
Central Office Fiber Distribution System enables all functions of FTTx deployment to be managed and accessed from one location. Distribution panels, splitters, and wavelength division multiplexers incorporated into system allow for patching from active to passive gear, RF video overlay, and distribution out to customers. Configured to specific needs, 6 in. high frame, utilizing high-density panels and optical component chassis with WDM and 1x32 modules, can serve up to 576 customers.
Fiber Optic Multiplexers target emission monitoring systems.
Weed Instrument Co., Inc.
Round Rock, TX 78680
Jul 19, 2006
Designed to multiplex CEMS 4-20 mA and 0-10 Vdc output signals at coal-fired power stations, Fiber Optic Converters monitor sulphur dioxide, nitrogen oxides, and particulate matter. Providing bi-directional communications, Series 2Mxx sends and receives up to 8 analog or digital signals over pair of fiber optic cables. Conversion of analog signals to fiber overcomes application issues such as EMI/RFI, lightning strikes, and ground loop problems.
Fiber Optic System operates at 1,310 nm wavelength.
Communications Specialties Inc.
Hauppauge, NY 11788
Jun 19, 2006
Pure Digital Fiberlink® 7250 Series transmits RGB resolutions up to UXGA and stereo audio over 2 single mode or multimode fibers. Each fiber may be connected to either input on receiver unit without affecting system operation with up to 20 m difference in length between 2 fibers. Unit requires no adjustments, equalization, or de-skewing. Applications include weather and satellite imaging, military installations, and digital signage.
Multiplexer Chassis provides up to 12 slots.
Apr 19, 2005 Model E1 PDH can combine up to 16 E1 and 4-port Ethernet signals in one fiber channel. With 6U height and up to 24 optical channels, unit is suitable for low capacity, point-to-point remote transmission applications. It includes 48 Vdc power supply, complete alarm functions, one RS232 asynchronous interface, and remote loop back functions.
Multiplexer transmits up to 60 km over one fiber.
Apr 19, 2005 Fiber optic, digital multiplexer transmits 2â€“64 channels of uncompressed video, 2â€“32 channels of bi-directional data and audio, as well as 4 E1 and 100 M Ethernet over single fiber cable. It features ability to add/drop video, audio, RS232/RS422/RS485, E1, and 100M Ethernet ports by plugging in or out service cards. Applications include CCTV, video surveillance, homeland security, and ITS.
Wave Division Multiplexers transmit two optical signals.
Communications Specialties Inc.
Hauppauge, NY 11788
Oct 13, 2004
Fiberlink® 6400 Series Passive Optical WDMs allow 2 separate fiber optic links to operate at different wavelengths over same fiber optic core. Each optical signal may carry multiple baseband video, audio, and data channels. Optical signals are transmitted at 850 and 1,310 nm over multimode fiber or 1,310 and 1,550 nm over single mode fiber. Insertion loss ranges from 0.5-2.0 dB per output. Units are available in card or box versions with ST or FCPC connectors.
RF/Fiber Optic Packages handle harsh environments.
Hampstead, NH 03841
Apr 13, 2004 Unibody RF/Fiber Optic Packages are available with fully machined tubes and packages or packages with brazed tubes. Connecting tubes are copper, stainless steel, or Kovar and package material is stainless or Kovar. All types achieve temperature rating of 850°C and RF performance up to 42 GHz. Designers can install up to 88 feedthrus and vary style from pin to pin. Pin termination options include flattened, square cut, radiused, or pierced.
Multiplexer transmits 8 serial data channels over one fiber.
International Fiber Systems, Inc.
Newtown, CT 06470
Sep 23, 2003 Environmentally ruggedized to meet NEMA TS-1/TS-2 requirements, plug-and-play D8000 Series fiber optic, 8-channel, full-duplex, serial data multiplexer can transmit up to 8 serial data signals over one or two multi-mode or single-mode optical fibers. Each channel may be independently configured for RS-232, RS-422, or RS-485 with 2 or 4-wire operation with tri-state. Single-mode version supports optical transmission distances of up to 37 miles.
(Showing headlines 1 - 20) more ....
Latest Products in the News
HBC-radiomatic - April 18, 2014
quadrix Ex: High-Quality Handheld Radio Control Now Certified According to NEC 500 / 505
Gems Sensors Inc. - April 17, 2014
Simplifying the Search for the Perfect Fluid Sensor
Matrix Packaging Machinery - April 17, 2014
Matrix Brings Its Robust Cheese Bagging Machine and Pre-Made Pouch Filler/Sealer to the International Cheese Technology Expo, April 23-24 in Milwaukee
Murata Machinery USA/Machine Tool Div. - April 16, 2014
Murata Machinery USA's Fiber Laser Takes Laser Processing to the Cutting Edge of Technology
Schaffner EMC, Inc. - April 16, 2014
"iF Product Design Award" 2014 for Schaffner IEC Inlet Filters
American Empire Manufacturing - April 16, 2014
American Empire Manufacturing Enhances Contract Filling Capabilities, Adds ISO 8/Class 100K Clean Room
Cal Quality Electronics, Inc. - April 16, 2014
Cal Quality Electronics Contracts with Boeing to Support the Combat Survivor Evader Locater (CSEL) Program
Saint-Gobain Performance Plastics, Omniseal - April 16, 2014
Saint-Gobain Seals' Rulon® 1439 Material Certified as USP Class VI Compliant, Further Meeting Needs of Medical Device and Pharmaceutical Processing
Nora Lighting - April 16, 2014
REVO, First Motorized Track Head, Available from Nora Lighting
MJS Packaging - April 16, 2014
MJS Packaging Customizes Jar for Household Products
More Products in the News...