Fiber Optic Transmission Systems

Electrical Equipment & Systems, Optics & Photonics, Test & Measuring Instruments

Pressure Transmitter is suited for hygienic process applications.

November 16, 2015

Used to help ensure consistent product quality in hygienic processes subject to regular clean-in-place/sterilize-in-place (CIP/SIP) regimens, Rosemount™ 3051HT utilizes pressure sensor technology and hygienic design to maintain measurement stability for up to 5 years. Transmitter stabilizes quickly after cleaning cycles and returns to calibrated settings. This enables manufacturers to produce repeatable batches at accelerated rate. Read More

Electrical Equipment & Systems, Optics & Photonics, Electronic Components & Devices

CXPI-Compatible Transceiver IC promotes vehicle fuel efficacy.

November 11, 2015

Enabling responsive multiplex communication even in HMI systems, BD41000FJ-C supports CXPI next-generation vehicle communication protocol for reduced size and count of requisite wire harnesses. IC enables multiplexing between ECUs and fosters reliability in severe automotive environments. Quiescent current of 3 µA typ and ESD resistance of ±8 kV (IEC61000-4-2) make it possible to achieve low-power, high-reliability CXPI communication. Read More

Optics & Photonics

Fiber Laser One Micron Optics have low-absorption coatings.

November 3, 2015

Featuring low-absorption (<50 ppm at 1.03–1.08 microns), fused silica substrates, 1 Micron Optics include lenses, protective windows, and nozzles for OEM high-power fiber laser systems. AR coatings on lenses and windows have high laser-damage threshold (>10 J) for extended life, while minimal absorption ensures quality cutting without thermal lensing and focus shift. With pinpoint focal length tolerance of ±0.5%, Fiber optics suits all 1 micron applications in 1,030–1,080 Nm range. Read More

Electrical Equipment & Systems, Optics & Photonics, Test & Measuring Instruments

Intrinsically Safe Pressure Transmitters suit hazardous locations.

October 14, 2015

FM-certified for hazardous locations, OMEGA® PX51-IS/PXM51-IS Series feature all-stainless steel construction with thick film sensing element. Gage, absolute, and sealed gage models are available with selection of outputs and unique dual fitting. Along with 4–20 mA output and 10–28 Vdc excitation voltage, features include ±0.25% FS accuracy (combined linearity, hysteresis, repeatability); 100 MΩ @ 50 Vdc min resistance between body and wire; and 60 to 160°F compensated temperature range.
Read More

Electrical Equipment & Systems, Optics & Photonics

Integrated Bluetooth Smart Module aids IoT product development.

October 9, 2015

Suited for space-constrained applications, 11 x 11 x 1.8 mm EZ-BLE™ PSoC® module integrates programmable analog and digital blocks and comes in 32-pad SMT module with 25 GPIOs, 128 KB flash, and 16 KB SRAM. Bluetooth® Smart module, based on PSoC® 4 Bluetooth Low Energy (BLE) Programmable System-on-Chip with ARM® Cortex®-M0 core, also incorporates CapSense® capacitive touch-sensing functionality, 2 crystals, on-board trace antenna, metal shield, and passive components. Read More

Electrical Equipment & Systems, Optics & Photonics, Sensors, Monitors & Transducers, Test & Measuring Instruments, HVAC

Temperature Transmitter targets functional safety products.

October 8, 2015

Intended for Safety Instrumented Systems (SIS), STZ Functional Safety Smart HART Temperature Transmitter conforms with IEC 61508:2010 for safety-related applications and provides dual sensor input that reduces process interruptions. Backup and fail-over protection allows either sensors or inputs to be designated as primary measurement; secondary input acts as backup. Also, dual sensor input allows for Average and Differential measurements along with High-Select and Low-Select options. Read More

Sensors, Monitors & Transducers, Electrical Equipment & Systems, Optics & Photonics, Test & Measuring Instruments

HART-Enabled Transmitters integrate switching for on-off control.

October 6, 2015

Lending to predictive maintenance strategy by reducing routine inspections and unplanned shutdowns, One Series 1XTXSW provides programmable switching functionality for industrial process monitoring applications. These solid-state transmitters with smart diagnostics integrate HART 7-compatible, 4–20 mA output and 2 solid-state programmable relays for monitoring temperature or pressure in safety, alarm, and emergency shutdown applications. Read More

Electrical Equipment & Systems, Optics & Photonics, Computer Hardware & Peripherals

E-Band Radios efficiently accelerate network expansion.

September 23, 2015

Efficiently delivering scalable 2-Gigabit capacity, EtherHaul-2200F/-2200FX mmWave radios create bandwidth-rich and interference-free connectivity for wireless networks. Solutions enhance aggregation, backhaul, and connectivity of multiple urban and commercial vertical markets, including business and residential broadband, video surveillance, Wi-Fi®, and mobile backhaul. Both radios integrate into mobile networks to expedite modifications and expansions. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Optics & Photonics, Electronic Components & Devices

Client-Side 100G Transceiver is compatible with CLR4 and CWDM4.

September 23, 2015

Consuming 3.5 W and offering optimized transmission via internal uncooled 1,310 nm 28 Gbps Directly Modulated Laser (DML) technology, QSFP28 client-side transceiver meets CWDM4 MSA and CLR4 Alliance optical interface specifications as well as IEEE 802.3bm CAUI-4 electrical interface specification. CLR4-enabled design provides low latency for cloud and financial applications, and unit is capable of operating without Forward Error Correction protocol on host card. Read More

Display & Presentation Equipment, Electrical Equipment & Systems, Optics & Photonics

HDMI Wireless Module provides data to operators over cloud.

September 17, 2015

Equipped with 4G/LTE radios for wireless connectivity and HDMI port for connection to touchscreen display, Model DWM-301 is designed for interactive ordering and media streaming signage solutions. Unit can support range of applications where data from customer interactions with connected display need to be delivered in real-time back to local or remote operator. Read More

Communication Systems & Equipment, Optics & Photonics, Electrical Equipment & Systems

DOCSIS 3.1-Compliant Devices foster multi-Gigabit delivery.

September 16, 2015

BCM3047, BCM31442 and BCM3222 enable Converged Cable Access Platform (CCAP) vendors to build and deploy DOCSIS 3.1-compliant equipment that supports multiple Gigabit cable broadband speeds over coax. While BCM31442 upstream burst receiver integrates ADC supporting up to 300 MHz upstream spectrum, BCM3047 single-chip downstream transmitter integrates DAC enabling transmission out to 1.2 GHz in cable plant. BCM3222 media access control (MAC) device supports up to 25 Gbps. Read More

Electrical Equipment & Systems, Optics & Photonics, Communication Systems & Equipment

Wireless Video Transmitter supports 4-screen HD multicasting.

September 15, 2015

Intended to increase content creation capabilities for broadcasters and other drone users, CONNEX delivers full HD video quality with zero-latency transmission over range of up to 3,300 ft. Solution supports diverse gimbals, remote controllers, and flight controller telemetry devices; is compatible with other 5 GHz transmitters on drone; and offers configurable fail-safe mechanism for gimbal control. Kit includes all antennas, cables, and connectors required for air/ground unit setup. Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

LTE Access Points offer secure connection and network scalability.

September 11, 2015

Designed for enterprise and industry vertical IoT solutions, EZ LTE Off-the-Shelf smart eNodeB indoor/outdoor access points provide broadband carrier grade connectivity for private networks. Solution offers network scalability and connects securely to any private IP network behind Enterprise firewall or Private/Public/Hybrid Clouds. Delivering LTE QoS and security, solution is powered by Lemko 5G networking software featuring virtualized, distributed EPC and IMS managed on cloud. Read More

Electrical Equipment & Systems, Optics & Photonics, Computer Hardware & Peripherals, Communication Systems & Equipment

Turnkey Live Media Server streams to 1,000 simultaneous users.

September 11, 2015

Atlas Streaming Server™ I ingests H.264 RTSP from any IP camera or HLS/RTMP from any streaming encoder and sends live adaptive bitrate video feeds to any device supporting HLS, MPEG-DASH, Smooth, or HDS/Flash. Outbound IP protocols can be RTMP, RTSP, or TS. Along with pre-integrated content security and DRM, including support for AES-128 encryption as well as Simulcrypt (ECMG), this stand-alone, Linux®-based appliance supports control from anywhere via remote GUI and standards-based APIs. Read More

Electrical Equipment & Systems, Optics & Photonics

Multiband 400 MHz Transceiver comes in compact SMD package.

August 25, 2015

Targeting telemetry, remote control, and industrial applications, Circuit Design STD-601 offers 6 selectable RF power output levels from 1–50 mW, 5 selectable data rates from 1,200–19,200 bps, and 4 selectable frequency bands: 429, 434, 447, and 458 MHz. Narrowband, blocking, and sensitivity features suit rugged, noisy industrial environments where good channel selectivity is required. Consuming 35 mA typ (TX 10 mW, 3 V), 20 x 32 x 5 mm SMD unit offers 600 m LOS communication range at 10 mW.
Read More

Optics & Photonics

Heavy Duty Fiber Optics withstand harsh environments.

August 7, 2015

Featuring flexible 304 stainless steel tube, Vantage Line of polyethylene-jacketed plastic fibers are protected from crushing or abrasion in harsh industrial environments. Eight models are available, 4 with opposed sensing mode and 4 with diffuse sensing mode, in 1 m and 2 m options. All heavy-duty fibers are compatible with Banner’s existing plastic fiber amplifiers, including DF-G family. Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Optics & Photonics

Mission-Critical Communications Radio covers 4.4-5.9 GHz range.

July 29, 2015

Offering deployment flexibility and sustainability, PTP 700 covers 4 GHz NTIA/NATO bands and 5 GHz unlicensed spectrum for federal, industrial, and public safety deployments. This point-to-point wireless broadband solution is available as Connectorized Radio or Connectorized+Integrated Radio. Latter allows for antenna selection at time of deployment. Capable of line of sight and non-line of sight operation, radio offers up to 450 Mbps throughput and has 124 mile max range. Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Optics & Photonics, Communication Systems & Equipment

Multiband 400 MHz Transceiver suits telemetry applications.

July 1, 2015

Featuring programmable frequency bands and channels, STD-601 comes in SMD, 20 x 32 x 5 mm package and offers communication range of 600 m (LOS) at 10 mW. Frequency bands – 429,  434, 447, and 458 MHz  – conform to various ISM bands to allow frequencies to be set within wide range, and transparent user data input allows use of proprietary protocol. Module also offers selectable RF power levels – 1, 5, 10, 20, 25, 50 mW – and data rates: 1,200, 2,400, 4,800, 9,600, and 19,200 bps. Read More

Electrical Equipment & Systems, Optics & Photonics, Sensors, Monitors & Transducers

Handheld Wireless Transmitter utilizes Bluetooth® technology.

June 10, 2015

Measuring different sensor inputs such as thermocouple, RTD, relative humidity, and pH, UWBT Series transmits data to smartphone or tablet via wireless Bluetooth communication. App running on iOS or Android™ phone/tablet monitors and logs sensor data and displays data in digital, graph, or gauge format. It can be configured in 9 languages and can be paired with multiple transmitters simultaneously. Logging up to 10 samples/sec, UWBT Series can send data files to email address or Cloud. Read More

Electrical Equipment & Systems, Optics & Photonics, Computer Hardware & Peripherals, Machinery & Machining Tools

Multi-Stream Router delivers 5.4 Gbps total Wi-Fi data rates.

June 5, 2015

Used where multiple devices concurrently stream HD and Ultra HD content, 8-Stream 5G WiFi XStream MU-MIMO platform features pentacore architecture that realizes max speeds over 3.8 GHz. MU-MIMO support improves wireless networking efficiency, while 1024 NitroQAM™ technology promotes performance, reach, and rate through high-power RF on 5 and 2.4 GHz bands. Router supports 8 streams at 5 GHz and 4 streams at 2.4 GHz; extended 5 GHz support adds three 80 MHz channels and two 160 MHz channels. Read More