RiT Technologies, Inc.    Mahwah, NJ 07430
Jul 27, 2011 Addressing datacenter demand for higher optical port density and accelerated installation, PatchView(TM) Xlight(TM) MPO-MPO Tray helps datacenters prepare for migration to next-generation 40G/100G network by using 12-fiber cabling systems and MPO connectors. It lets installers work with MPO cords, is fully compatible with 40G and 100G IEEE 802.3 applications, and is comprised of MPO adapters in 1U of rack space. Upon insertion of Xlight MPO-MPO Jumper, optical and electrical connections are made.

Ideal Industries, Inc.    Sycamore, IL 60178
Dec 21, 2009 Fitting into adapter bay, FiberTEK® FDX Modules extend capabilities of LanTEK® II LAN Cable Certifiers to include certification of multi-mode and single-mode fiber optic cabling to Tier 1 standards. Single strand of fiber connected between handsets is tested at 2 wavelengths and in both directions simultaneously, while length of fiber is accurately measured. Field changeable SC, ST, and FC adapters eliminate need for hybrid launch cables.

General Machine Products Co.    Trevose, PA 19053
Dec 03, 2008 Available in variety of sizes that accommodate 1-5 in. dia ducts, Duct and Innerduct Blowing Accessories eliminate air pressure leaks, air-flow control issues, inconsistent rope diameters, difficult equipment handling, over-crowded ducts, and other cable blowing problems. They include safety-locking control valve, 3/16, ¼, and 3/8 rope adapters, innerduct and conduit seal-offs, duct projectiles, and low-friction missile line carriers. Products aid in fiber optic cable placement.

Thinklogical    Milford, CT 06460
Sep 19, 2008 Harnessing single-mode fiber optic technology, VelocityKVM transmits and receives DVI video and peripheral signals up to 40 km. Advanced peripheral capability supports PS2, full duplex stereo audio, serial RS-232, USB 1.0 HID device ports, USB 1.1, and 2.0. Supporting multiple video sources, VelocityKVM provides error-free transmission, with no frame or bit dropping and complete immunity to interference.

GE Co., GE Consumer Products    Louisville, KY 40225
Aug 04, 2008 Based on IEC 61850 and intended for protection and control systems, Multilin HardFiber System is made up of HardFiber Brick, HardFiber Cross Connect Panel, HardFiber Outdoor Fiber Cables, and Universal Relay IEC 61850 Process Card. System eliminates need to install and maintain thousands of copper wires used for signaling and monitoring in electrical substations, and provides identical interface to all primary system equipment.

Video Products, Inc.    Aurora, OH 44202
Jul 31, 2008 With visible 635 nm red laser, FIBER-CHECKER can be used on fiber optic cable up to 3 km long to locate broken splice or fiber, identify overly tight cable ties, or isolate damaged connector. Break or bend in fiber is indicated by red light escaping from cable at fault point, and laser output from cable ends is clearly visible when facing flat surface approximately 6 in. away. Unit can be used to test all fiber connectors with 2.5 mm ferrule.

JDSU    San Jose, CA 95131
Jul 21, 2008 Suited for FTTx, LAN/WAN, and data centers found in cable and telecommunications networks, Fiber Optic Tests Kits provide tools necessary to inspect, clean, and perform power or attenuation measurements on fiber optic connections to avoid network damage during installation, qualification, and troubleshooting. Components include video fiber microscopes, optical cleaning tools, PocketClass(TM) or SMART optical light sources, optical power meters, and visual fault locator.

Prysmian Cables & Systems    Lexington, SC 29072
Dec 14, 2007 Providing means of connecting users in high-rise buildings and multi-dwelling units, VertiCasa(TM) System comprises main riser cable of up to 96 fibers, which can be branched directly to individual subscribers on different floors of MDU without need for splicing of fiber within riser of building. Fibers are extracted from breakout windows in main cable, allowing required length of protected fiber to be routed directly from main body of cable through to end user.

Corning Cable Systems    Hickory, NC 28603-0489
Oct 10, 2007 Providing method for deploying optical fiber in plant and factory floor environments, Plug and Play(TM) ISP Systems feature fire-retardant optical fiber cables with tether attachment points (TAPs) pre-installed at customer-specified intervals. Each TAP provides access to optical fibers via single or dual 12-fiber tether that is terminated with OptiTip(TM) MT Connector. Available in single-mode and multimode versions, systems are compatible with 2.0 in. duct.

APA Cables & Networks Inc.    Plymouth, MN 55442
Sep 27, 2006 Central Office Fiber Distribution System enables all functions of FTTx deployment to be managed and accessed from one location. Distribution panels, splitters, and wavelength division multiplexers incorporated into system allow for patching from active to passive gear, RF video overlay, and distribution out to customers. Configured to specific needs, 6 in. high frame, utilizing high-density panels and optical component chassis with WDM and 1x32 modules, can serve up to 576 customers.

Ideal Industries, Inc.    Sycamore, IL 60178
Dec 19, 2002 With grooved face, plastic polishing fixture Model 45-342 is suited for use with ST, SC, and FC connectors with 2.5 mm ferrules. Precision manufactured center hole diameter assures that ferrule is kept perpendicular to polishing surface. Aluminum oxide polishing film provides consistency resulting in repeatable connector finishes on ceramic, stainless steel, plastic, and composite ferrules. Single sheet yields range of 10–20 connectors when used in 3-step process.