Optical Brackets

Optics & Photonics

Mounting Brackets simplify shaft grounding ring installation.

August 11, 2015

Available for motor shafts to 30 in. dia, Universal Mounting Brackets accelerate and facilitate installation of AEGIS® iPRO, AEGIS® iPRO-MR, and AEGIS® WTG Bearing Protection Rings on large motors. Brackets attach to iPRO or WTG Rings with screws, while slotted legs, used for mounting to motor, accommodate bolt circles from 2.64–7.79 in. dia. Also included are standoff spacers (½, 1, and 1½ in.), mounting bolts, flat washers, and lock washers. Read More

Portable Tools, Optics & Photonics

Mini-Split Installation Support Tool reduces labor requirements.

January 20, 2015

Supporting up to 100 lb, Mighty Bracket™ fits most mini-split sizes and enables hands-free, single-person installation of evaporator coil. Reusable bracket, constructed of ABS plastic, hooks onto both tabs of mini-split wall mounting plate in <1 min and holds mini-split evaporator coil for electrical, refrigeration line, and condensate drain pump/hose connections. Due to 20 in. long support arms, evaporator coils can be temporarily angled away from wall at 23° to 45° for back panel access. Read More

Communication Systems & Equipment, Optics & Photonics

MIMO Antennas include mounting kits.

December 8, 2014

Supplied with mounting brackets and low-loss cable assemblies, Omni, Dish, and Sector style MIMO Antennas connect directly to Ubiquiti® RocketM2 or RocketM5 access points, allowing rapid deployment of wireless networks. Brackets are constructed from stainless steel for outdoor use. Mounting kit is also available as standalone item that can be purchased separately. Read More

Optics & Photonics

Adjustable Bracket mounts steel boxes in diverse applications.

December 2, 2014

UL-approved Steel City® O-Justable Bracket offers versatility to mount steel boxes in various applications and jobsite conditions. Compatible with any stud spacing from 12–25 in., bracket can be mounted at any required height and accommodates 4 square, 4 11/16 in. and Steel City® 5-Square boxes. Multiple boxes may be installed on single bracket to ensure uniform alignment. Installer can adjust width of bracket to match various stud spacings encountered on job site. Read More

Material Handling & Storage, Optics & Photonics, Fasteners & Hardware, Construction Equipment & Supplies

Crane Lift Kit makes jobsite storage mobile.

November 15, 2011

Featuring 4 heavy-duty carbon steel lift brackets, mounting hardware, and installation instructions, Model 497 Crane Lift Accessory Kit works with full KNAACK® product line to provide secure attachment points, enabling quick strapping and hoisting of jobsite boxes. With kit, storage equipment weighing up to 2,500 lb can be lifted and carried safely. Weather-resistant black enamel paint finish maximizes durability. Read More

Mounting & Attaching Products, Optics & Photonics

Heavy-Duty Cable Entry Bracket speeds cable installation.

June 2, 2011

Installed with 3.5 in. hole saw, Arlington CE1RP cable entry bracked accelerates installation of bundle of Class 2 low-voltage wiring. Reinforced slotted cover holds bundle of low-voltage cable securely and allows pass-through of HDMI connectors. When tightened, mounting wing screws hold bracket securely against wall. Leveling can be accomplished by rotating bracket and tightening screws, and bracket can adjust to fit ¼-1½ in. wall thickness. Read More

Mounting & Attaching Products, Optics & Photonics

Wireless Access Point Wall Bracket enables horizontal mounting.

March 8, 2011

Accommodating hard lid and other environments where ceiling mounts are not possible, Model 1029-00 Wall Mount Bracket ensures wireless access points (APs) are securely placed in recommended horizontal configuration so they can achieve optimal coverage. Product is constructed of white powder-coated steel and works with access points from most manufacturers. Conduit, raceways, and cable can be securely terminated inside bracket, promoting clean appearance. Read More

Mounting & Attaching Products, Optics & Photonics

Bracket mounts wireless access points.

February 23, 2005

Overhead Wireless Access Point Bracket attaches directly to wire-style cable trays and may also be hung from cable tray using threaded rod. If optimal access point location does not coincide with cable tray, bracket can be suspended from building structure with threaded rod. Support bars are punched to accommodate different rod sizes. Galvanized steel bracket includes mounting straps that allow wide variety of mounting configurations. Read More

Electronic Components & Devices, Optics & Photonics

Bracket separates power and voice/data cables.

December 3, 2004

CADDY® CATPDCM Power Divider Bracket provides separate pathways for power and voice/data cables with strut in center acting as NEC®-required barrier. Available in 8 and 12 in. sizes, single, divided U-hooks feature large diameter, rounded support surfaces that prevent over-bending and kinking of cables. Optional CADDY® CATCSCM Cross Support widens system to 24 in. It attaches perpendicular to strut spine, allowing parallel installation of U-hooks. Read More

Mounting & Attaching Products, Optics & Photonics

Mounting Bracket offers alternative to bent-plate brackets.

July 12, 2004

Investment cast of CF8M stainless steel, bracket is available in NAMUR No. 1 and No. 3 geometries. Open design facilitates access to fasteners to simplify mounting. Read More

Optics & Photonics

Laser Module Mounting Brackets facilitate positioning.

June 16, 2004

Series LB allows air convection cooling and avoids short circuits from common positive case grounding of laser diode modules. Constructed of non-conductive Delrin plastic, brackets feature 360° rotation around orthogonal axes, with right and left translation adjustable along ¼ x ¾ in. mounting slots. Available in widths of 25, 16, 12.7, 12, and 10.5 mm, brackets mount to post furnished on 1½ x 1 x ½ in. non-conductive base for attachment to breadboards or optical tables. Read More

Optics & Photonics

Hinged Mounting Bracket positions photoelectric sensors.

June 2, 2004

Right angle bracket, model OMH-RL2-H, facilitates adjustability for photoelectric sensors in different mounting situations, eliminating need for custom brackets. Product works with proprietary Series 23, 25, 28, 29, and 32 photoelectric sensors, providing users with range of movement for aligning and adjusting sensor to its application. Bracket comes with mounting hardware. Read More

Electrical Equipment & Systems, Optics & Photonics

Support Bracket organizes MC/AC cables.

January 21, 2003

CADDY® MCS 100 properly spaces MC/AC cables to eliminate bundling and NEC derating issues. Multifunctional, modular bracket neatly isolates, supports, and secures cables while maintaining access and flexibility. It handles up to 8 MC/AC cables and range of sizes including 14-3, 14-4, 12-2, 12-3, 12-4, and 10-2. Mild steel bracket features electro-zinc finish and locking tab that prevents unwanted cable release. It is UL listed for support and positioning. Read More

  • 1