Pinpoint Laser Systems    Peabody, MA 01960
Apr 24, 2013 As data accessory for Laser Microgage industrial measuring and alignment system, Capture™ lets operators grab measurement readings on-the-fly from as many as 4 remote laser receivers to analyze alignment and performance of their production machinery and industrial equipment. Windows®-based application records incoming readings, displays results, and increases control capabilities. Solution also interfaces cleanly with spreadsheets, statistical analysis packages, and other programs.

New Focus, Inc.    San Jose, CA 95134
Apr 06, 2012 Providing precision control of laser pointing and position drift, GuideStar(TM) II includes 2 independent Picomotor(TM)-actuated mirror mounts for manual and active 4-axis control with passive stability. Two miniature CMOS cameras offer position sensing and continuous tracking of laser beam positions and profiles, while control algorithm ensures correct alignment of beam in both X and Y, and near- and far-fields. GuideStar II controller can be connected to cameras and Windows computers via USB.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Feb 17, 2012 By ensuring ATC gripper aligns tool with extreme precision, ATC Alignment Tool prevents collision and potential damage, extending machine tool, cutting tool, and tool holder life. Tool may also be used to align ATC gripper to magazine tool pockets. Unit has built-in stylus that determines high/low values when plug is slowly rotated. Values are displayed on 10 micron/div dial indicator and reveal eccentric direction.

Newport Corp.    Irvine, CA 92606
Aug 19, 2011 Equipped with 1917-R laser power meter, LAKIT Series Tuning Kits utilize broad selection of optical detectors, including silicon, Germanium, or thermopile detectors. Units operate in wavelengths from 200 nm to 10.6 microns, with up to 100 W average power. Series 918D, designed for low power lasers less than 2 W/cm², operates in visible or IR spectrum. Series 818P thermopile detectors are suited for measuring average power for high power lasers that operate in CW and pulsed modes.

Pinpoint Laser Systems    Peabody, MA 01960
Aug 03, 2011 Producing collimated laser reference beam that forms bulls-eye pattern, Proline Alignment Kit is suited for leveling as well as checking and measuring straightness, flatness, squareness, and parallelism. Laser is enclosed in precision machined housing, ensuring laser reference beam is parallel to side and base surfaces within 0.003°, or less than 0.030 in. at 50 ft. Finely ruled target and magnetic base can be moved around for checking alignments, allowing one person to perform work of several.

Pinpoint Laser Systems    Peabody, MA 01960
Jun 28, 2011 Used for aligning machinery and equipment, Microgage 2D Transparent Receiver allows laser beam to pass clearly through it while measuring position with precision of 0.0005 in. Unit operates over distances of 100 ft or more, and instructions guide operator through alignment project. Several accessories allow for alignment of straightness, runout, parallelism, squareness, roll and web alignment, shaft and bore alignment, flatness measuring, and more.

Pinpoint Laser Systems    Peabody, MA 01960
Jun 28, 2011 Used for evaluating and correcting machinery alignment problems, 4D Microgage Receiver measures 2 linear axes (X and Y) and their 2 angular components' yaw and pitch. Linear axes show how well machinery is aligned along common centerline, while angular readouts show if parallelism problems are present. Able to operate over distances of 100 ft or more, product incorporates digital display and delivers measuring precision of 0.0005 in. and 0.002°.

Pinpoint Laser Systems    Peabody, MA 01960
Jun 09, 2011 Suited for industrial applications, Microgage Bore Alignment Kit consists of cylindrical laser that can be adapted to bores of all sizes. Laser reference beam is projected to digital receiver held in reversible bore mount, allowing receiver to detect laser beam coming either through bore or entering bore. Measurement readings, as small as 0.0001 in., are transmitted to handheld display and define bore or shaft's alignment, guiding user to what changes are needed for optimal performance.

Pinpoint Laser Systems    Peabody, MA 01960
May 16, 2011 Comprised of laser transmitter, digital receiver, and handheld display, Laser Microgage 2D Kit can measure and realign misaligned rolls and web systems, uneven travel on CNC machine tools, and poorly aligned bore tubes. Rotating base helps align and check flat planes, while right angle beam bender squares machinery. Readings are shown on LCD screen in 0.0001 in. increments or millimeters. To store readings and generate printouts, Microgage connects to laptop or PC via interface cable.

VibrAlign, Inc.    Richmond, VA 23236
Feb 04, 2011 Featuring 4 in. color screen, Fixturlaser GO Pro is intended for anyone works with or maintains/services rotating machinery. Verizontal Compound Move function suggests how to correct shaft alignment vertically if values are out of tolerance, and then user can proceed to horizontal adjustment where live values are displayed during entire adjustment. Depending on measurement results, adaptive user interface guides user throughout alignment process.

Pinpoint Laser Systems    Peabody, MA 01960
Jan 10, 2011 Designed for Laser Microgage measuring and alignment system, Capture Software allows operators to grab measurement readings from 4 remote laser receivers to analyze alignment and performance of production machinery and industrial equipment. Windows-based application records incoming readings, displays results, and interfaces with spreadsheets and statistical analysis packages. Together, Laser Microgage and Capture deliver precision of 0.0001 in. over working range of 180 ft.

Pinpoint Laser Systems    Peabody, MA 01960
Dec 03, 2010 Designed to facilitate alignment of rollers, idlers, take-up reels, shafts, and web handling systems, Microgage Roll Alignment Kit provides precise measurements of roll position and orientation on production lines of all sizes. Laser transmitter projects straight, visible reference line that can be directed into production line, while digital receiver reads roll's position relative to centerline of laser beam. Display unit can upload readings to computer.

Sensor Products Inc.    Madison, NJ 07940
Nov 23, 2010 Mold-Align®, when placed between mold halves during injection molding, changes color to reveal how pressure is being distributed between A and B halves of mold. It is placed between platens on parting line which are then subjected to pressure upon clamp closing, using minimal clamp tonnage. After product is removed, image is inspected for pressure distribution and void spots. Product may be archived and used as control for comparative purposes.

Pinpoint Laser Systems    Peabody, MA 01960
Nov 08, 2010 Consisting of cylindrical laser that can be adapted to bores of all sizes, Microgage Bore Alignment Kit projects laser reference beam to digital receiver that is held in mount with similar precision bore diameter. Measurement readings as small as 0.0001 in. are transmitted to handheld display to define bore or shaft's alignment and guide user to what changes are needed. Using computer interface, Microgage can store readings and connect to common programs and spreadsheets.

L.S. Starrett Company    Athol,, MA 01331
Sep 28, 2010 Available in 2 models, Automotive Inspection Sets help mechanics measure proper distance or alignment between parts in tightly confined spaces. Model S898Z-1 combines pliers, Flex-O-Post, dial indicator with .001 in. grads and 1 in. travel, and fitted plastic case, while Model S898Z-2 additionally includes magnetic base. Both are suitable for measuring amount of front-end play or ball joint wear, as well as checking part movement associated with other applications.

American Laser Enterprises, Inc    Novi, MI 48376
Aug 19, 2010 With A-Las(TM) System, users can align complex laser beam delivery systems in seconds from any location worldwide for numerous machines. System eliminates trial and error troubleshooting, minimizes parts consumption, and maximizes machine uptime while enabling one person to diagnose and correct multiple machines.

Pinpoint Laser Systems    Peabody, MA 01960
Jul 01, 2010 Providing useful alignment information for evaluating and correcting machinery alignment problems, 4-axis Microgage Receiver measures two linear axes X and Y and their two angular components yaw and pitch. It delivers measuring precision of 0.0005 in. and 0.005° and features compact, digital display for precise linear and angular readings. Unit is suited for aligning lathes, turning centers, spindles, moving linear slides, rams and pistons, and injection molding machinery.

Pinpoint Laser Systems    Peabody, MA 01960
May 03, 2010 Producing collimated laser reference beam that forms bulls-eye pattern, Pinpoint Proline Alignment Kit is suitable for checking and measuring straightness, flatness, squareness, parallelism, and leveling. Kit combines features of transit, infinitely long straightedge, and laser alignment system in one portable product. Laser is enclosed within precision machined housing, ensuring that reference beam is parallel to side and base surface within 0.003°, or less than 0.030 in. at 50 ft.

Alignment Supplies, Inc.    Maumee, OH 43537
Apr 20, 2010 With Live-Any-Angle 360° alignment, Easy-Laser® E710 enables users to make adjustments to alignment with laser heads in any position, and still get live updated values. Endurio(TM) Power Management system ensures that integrated battery automatically charges itself from 4 C cell batteries so users never have to stop alignment because of exhausted battery power. Additional features include color graphics, barcode scanner accessory, and EasyLink(TM) software for transfer of files to PC.

Pinpoint Laser Systems    Peabody, MA 01960
Mar 10, 2010 Suitable for lathes, turning equipment, spindles, and related machinery, Microgage Spindle Alignment Kit provides information on runout, centerline offset, parallelism, and concentricity. Laser allows for alignments over distances as great as 150 ft. Operating on batteries, kit's components are machined of solid anodized aluminum or stainless steel for wear resistance. Serial and USB interface connect to laptop or PC and link to spreadsheets for plotting and analyzing data.