GAO Instruments Inc.,    Toronto   Canada
Aug 17, 2009 Suited for use with single mode fiber optic cable networks, CATV networks, and local networks, model A0670012 tests optical power within wavelength range of 780-1,700 Nm. It features large character LCD screen, auto power-off function, and supports continuous operation of more than 20 hrs when it is fully charged. Lightweight unit is also suited for debugging and maintenance of telecommunication networks.

GAO Embedded Inc.    Toronto 12345  Canada
Aug 14, 2009 Suited for single mode fiber measurement, Model 2498 can be used as optical power meter, stabile light source, or loss measurement system. It delivers CW mode light signals, and offers measurement resolution of 0.1-1 dB in W display mode or 0.01-0.1 dB in REL display mode. Device carries out optical loss measurement at 0.85, 1.30, 1.31, and 1.55 µm, with measurement range of 3-70 dBm or 20-50 dBm. Choice of power sources include AC adaptor, rechargeable Ni-Cd battery, and dry cells.

Steinmeyer Inc.    Bedford, MA 01730
Aug 13, 2009 Weighing 2 kg, Model MP63 combines DC gear motors, rotary encoders, lead screws, and non-contact limit switches in fully enclosed assembly. Unit provides 25 mm stroke in each direction with 5 micron accuracy and ±1 micron repeatability. Standard straightness and flatness is ±3 microns. Cable connectors are located on one end, and, as option, assembly can be made clean room compatible.

ACTi Corporation    Taipei   Taiwan
Aug 12, 2009 Providing triple codec (H.264/MPEG-4/MJPEG) with 2 simultaneous streams, TCM-5311 1.25 megapixel CCD day/night IP camera can transmit 2 H.264 video streams at different video formats, frame rates, and resolutions. With frame rate of 30 frame/sec in HD720 (1,280 x 720) resolution, camera features mechanical IR-cut filter to increase IR light sensitivity for enhanced night vision. Changeable lens model offers certified 2.8-12 mm varifocal megapixel lens as optional accessory.

Curtiss-Wright Controls Embedded Computing    Leesburg, VA 20175
Aug 11, 2009 Available in air-cooled and conduction-cooled configurations, Sentric2 records and plays up to 4 channels of 1,080p HD video and audio in real-time at full frame rate. Unit features composite and RGB analog and digital DVI video input and supports hardware-accelerated JPEG2000 or MPEG4 compression. Support for metadata enables integration of GPS and timing data as well as creation of event tags for use as chapter points for navigation within captured and compressed video.

AMS Technologies AG    Munich 82152  Germany
Aug 07, 2009 Available as connectorized PCB array and as complete air-cooled light engine with drive electronics, UNO PLUS Dome Array White Hi-CRI Vari-CCT optimizes color mixing via selection of red, green, blue, amber, and additional white LED chips. Light source accommodates 36 LED chips in aperture of 1 cm² and can generate white light with CCT from 2,800-6,500 K. CRI is greater than 90, and integrated Dom optics enables enhancement of luminous flux to greater than 1,800 lumens at 50 W input.

Rofin-Baasel Inc.    Boxborough, MA 01719
Aug 07, 2009 FL Series can be used to weld small parts with low thermal distortion and minimal heat affected zones. Beam quality can be coupled with fiber optics 50-600 µm in diameter, equivalent to beam quality of 2.5-30 mm x mrad. Additionally, model FL 010 S offers option of fiber laser solution with single mode beam quality of 0.4 mm x mrad (typ) and 1,000 W output power. Optional beam switch and energy share modules enable one laser to be used in up to 4 individual work cells.

GAO Tek Inc.    Toronto M1B2K4  Canada
Aug 07, 2009 With measurement range of up to 5 km, Model 3C-04 is used for fiber optic identification and fault location on single mode or multimode fiber, and wavelength loss testing. Locator detects breaks and micro-bends even for jacketed fibers, and laser's high power 650 nm can transmit continuous light or adjustable strobe light. Suitable applications include maintenance of fiber optic networks, LAN, FDDI, ATM optical systems, telecommunications, and CATV networks.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 DIAMOND(TM) E-1000 has integrated power supply and does not require external gas supply, allowing it to be mounted on moving robot arm. Uses include small machines in space-sensitive applications involving cutting, perforating, and drilling of paper, plastic films, plastics, glass, carbon composites, and thin metals. Featuring sealed design, laser exhibits spatial mode quality (M2) of less than 1.2 and square wave pulse shape that delivers up to 2.5 kW of peak power.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Packaged in laser head measuring 125 x 70 x 34 mm, Sapphire(TM) 568 is available in models offering 50, 75, 100, 150, and 200 mW of continuous wave output. Unit provides stable beam with M² less than 1.1 and low noise of less than 0.25% rms from 20 Hz to 2 MHz. Wavelength compatible with legacy ion laser technology, Sapphire 568 is suited for life science applications such as confocal microscopy and drug discovery.

Clearfield, Inc.    Plymouth, MN 55442
Aug 07, 2009 Intended for 1,550 nm optical transmission networks, WaveSmart PowerNode 1550 EDFA offers custom wavelengths and user-defined power output levels for distribution of optical signals. Internal microprocessor provides real-time monitoring and control for operating status of pump and I/O optical power. Warning information will be generated in case of amplifier failure and in critical condition, pump laser will be automatically switched off when no optical power is available.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Delivering 525 W at 1,064 nm, Mamba(TM) Diode-Pumped Solid State Laser features PermAlign construction for drift-free alignment of resonator optics, pump diodes fabricated from AAA(TM) material, 600 or 800 µm square cross section fiber, and indium-free hard solder pump diode packaging. Pulse OnDemand suite of features, including single shot and burst mode operation, and first pulse equalization, make it possible to utilize every pulse produced by laser.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Measuring 125 x 70 x 34 mm, Sapphire(TM) 488 LP offers 150 mW of CW output at 488 nm, while Sapphire 561 LP provides 200 mW of power at 561 nm. Units provide stable beam with M² of less than 1.1 and low noise of less than 0.25% rms from 20 Hz to 2 MHz. Optically pumped semiconductor laser technology produces minimal waste heat, while USB interface, available in OEM version only, enables software control of laser operation and readout of laser operating and status parameters.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Delivering 150 W at 1 kHz repetition rate and at wavelength of 10.6 µm, DIAMOND(TM) E-150 offers M² beam quality of less than 1.2 and output stability of less than ±7%. Slab discharge CO2 laser is expected to deliver MTBF of over 60,000 hours. It is suited for cutting textiles, natural leather, plastics, and thin materials; converting plastic film and papers; ceramic scribing; and wood engraving.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Powered by AAA(TM) diodes, Verdi(TM) G5 is based on optically pumped semiconductor laser technology. Unit features low noise of less than 0.03% rms and single-spatial mode output with M² less than 1.1. Built on PermAlign(TM) solder-down manufacturing platform, Verdi G5 provides reliability of more than 20,000 hours and is suited for pumping ultrafast and CW Titanium:Sapphire lasers.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 With optimized Novatube® construction and discharge design, LEAP laser is designed for micromachining applications in microelectronics and medical device manufacturing. Direct UV laser emission delivers per pulse energy of 650 mJ at repetition rates to 200 Hz, resulting in 130 W average power, at wavelengths of 248 or 308 nm. Primary use is intended for micro-manufacturing of small devices with smart functions - electrical, chemical, biological - and micro fluidic parts.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Suited for solar, semiconductor, and medical device manufacturing, MATRIX(TM) 532-8-100 Q-switched DPSS Laser provides 8 W of output power at 532 nm at pulse rate of 100 kHz. Unit incorporates AAA(TM) Aluminum Free Active Area pump diodes and is constructed using PermAlign(TM) component mounting technology, which uses robotic assembly methods. Laser delivers less than 2% power stability, pulse-to-pulse noise of less than 2% rms, and pointing stability of less than 15 µrad/°C.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Exhibiting noise of less than 0.1% rms and mode quality of M2 less than 1.1, Genesis(TM) CW green (532 nm) lasers are air-cooled and can be directly modulated. Genesis 532-1000 S lasers produce over 1 W of output power, while Genesis 532-500 S lasers deliver over 0.5 W. Both are based on optically pumped semiconductor laser (OPSL) technology, which is scalable in wavelength and output power.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 Suited for flow cytometry and other live-cell bio applications, Genesis(TM) 355-150 S is based on optically pumped semiconductor laser technology. Unit offers true CW source of 355 nm UV laser light, avoiding potential high peak power problems arising from quasi CW lasers. With low output noise and single spatial output mode, laser is also suited for egg and fertilized-egg sorting as well as fluorescence-based applications, such as confocal microscopy.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Aug 07, 2009 With laser head measuring 491 x 216 x 141 mm, AVIA(TM) 355-5 Q-Switched DPSS Nd:YVO4 Laser delivers 5 W of 355 nm output at 50 kHz, and is suitable for operation at repetition rates up to 150 kHz. Unit features automated harmonic crystal shifter to maintain constant output power for more than 20,000 hours. Posilock(TM) beam position sensor and feedback loop results in beam position stability over life of laser.