Edmund Optics
Barrington, NJ 08007
May 28, 2008 With transmitted wavefront distortion of ¼-wave, peak-to-valley, TECHSPEC® High Performance ReflX(TM) Objectives feature numerical aperture of 0.28, working distance of more than 23 mm, and focal length of more than 13 mm. Tapered mechanical design allows use at angles of incidence up to 45°, while curved spider leg mounts eliminate diffraction effects in image plane that can occur with straight legs. Choice of coatings allow lenses to cover wavelength ranges from deep UV to 11 mm into IR.

Special Optics, Inc.
Wharton, NJ 07885
May 28, 2008 UV microscope objective provides 0.28 micron spot imaging at wavelength of 248 nm and 0.41 micron spot imaging at wavelength of 365 nm. Featuring effective focal length of 5.5 mm and field of view of 100 microns, it is diffraction limited with less than 0.07 waves RMS wave front distortion over entire field of view.

Photonic Products, Ltd.
Huntington Beach, CA 92647
May 27, 2008 Encapsulated in hard-coat anodised case with scratch-resistant sapphire window to protect lens, laser modules withstand harsh conditions, and are static, surge, and reverse polarity protected. They come in 635-830 nm wavelengths with standard elliptical output beam or line or cross generating optics. Units feature optical output powers from 0.95-30 mW, operating voltage of 5 Vdc regulated ±10%, -10 to +50°C operating temperature range, and 2.5 mm dc jack/industrial screw-on connectors.

Laser Photonics, Inc.
Lake Mary, FL 32746
May 27, 2008 LINK Fiber Laser Precision Cutting System can perform effective N₂, AR, or O₂ gas assist cutting under pressures of up to 250 psi. Featuring granite base and direct drive motor with integrated software control, it preserves large amount of detail when cutting and engraving. Using fiber laser technology, system helps cut highly reflective materials, and is suited for cutting and engraving aluminum, stainless steel, copper, and alloy metals.

Gigahertz-Optik Inc.
Newburyport, MA 01950 4009
May 23, 2008 GB modular goniometric bench can perform PC remote controlled angular dependent light measurements of LEDs in conjunction with standard optometer or light analyzer. Rotary tables form base of GB system used for horizontal and axial rotation of light source, and GB modules include adapters for various types of LEDs, enabling individualized measurement set-ups. For measurements outside darkroom, GBE-LTE light tight enclosure can be added to bench.

Photonics Industries International Inc.
Bohemia, NY 11716
May 23, 2008 PS line of high power Modelocked Pico second lasers includes 70 W 532 nm TEM00 (M2<1.1) green laser that can convert up to 120 W in IR (1,064 nm) to 80 W in green (532 nm), or 30 W UV (355 nm), or 10 W DUV (266 nm), while maintaining TEM00 mode quality. Laser features repetition rate mode locked fixed at 80 MHz and pulse width of less than 25 ps.

Pad Print Machinery of Vermont
East Dorset, VT 05253
May 22, 2008 Operating at speeds to 45 ips, bench-top sized Rapid Fire Cliche Maker comes with PC and uses 10 W CO2 laser to etch polymer pad printing plates to depths from 18-60 microns. Dot size of one tenth of one thousandth of one inch enables extremely fine lines and details, including half tones and 4-color process cliches. Laser-powered system produces etched polymer plates, available in 2 different styles with 10,000 or 20,000 impression lifespans.

Fairchild Semiconductor
San Jose, CA 95134
May 21, 2008 With built-in active dv/dt clamp that provides noise immunity (dv/dt) of 10,000 V/µs, random-phase FOD420 and FOD4208 facilitate solid state relay, AC motor control, and lighting ballast design. RoHS-compliant products provide 5,000 V of isolation while controlling power triacs that switch load. They utilize Pb-free terminals and can be used in conjunction with discrete power triacs.

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
May 19, 2008 With over 18 W of average power at pulse repetition rate of 200 kHz (pulsewidth of less than 15 ps), Talisker mode-locked laser enables precision micromachining at high throughput rates with negligible HAZ. Unit can be used on virtually any material type, including metals, polymers, glass, and semiconductors with choice of IR (1,064 nm), visible (532 nm), or UV (355 nm) output. It combines characteristics of both fiber-based and free space lasers.

LUXIM Corp.
Sunnyvale, CA 94089
May 19, 2008 Solid-state light source, LIFI(TM) STA-40-01, has compact, directional beam with CRI of 95 that promotes light distribution. Source is rapid on, rapid restrike, dimmable, and remotely addressable. These features enable energy-saving modes such as daylight harvesting, occupancy sensing, and demand response dimming. Retrofitting into existing fixtures, source delivers 22,000 lumens with 120 lumens/W source efficiency and 30,000 hr life.

GrayGlass
Queens Village, NY 11429
May 16, 2008 Engineered from concept to completion, front surface mirrors for optical products are available from hundreds of glass substrates. Applications for OEMs include short-run or high-volume custom reflective coating for larger optics, instrument optics, and lighting optics. Surfaces are suited for lenses, mirrors, prisms, windows, filters, light pipes, and other applications.

Ophir-Spiricon Inc.
Logan, UT 84321
May 15, 2008 Model BA150 Industrial Laser BeamAnalyzer system incorporates USB 2.0 silicon CCD camera with beam analysis software to monitor all key laser beam parameters for 1,064 nm pulsed and CW industrial Nd:YAG, diode, and fiber lasers up to 150 W. Parameters including beam profile, average laser power, energy per pulse, pulse rate, and temporal pulse width. All measurements are made independently of laser power supply and can be output to PC.

Safety Technology International, Inc.
Waterford, MI 48327
May 14, 2008 Constructed of aluminum with moisture resistant cord grips for cable penetration, Stopper® Line housings protect cameras from harsh indoor/outdoor environments as well as physical abuse and accidental damage to help stop false fire alarms, vandalism, and theft of fire/security equipment. Including STI-7000K basic unit and STI-7100K with heater, blower, and sunshield, they have spring assisted forward opening lid, rear link-lock latch, and mounting bracket.

Optek Technology, Inc.
Carrollton, TX 75006-6905
May 13, 2008 Suited for space-constrained applications, SMT phototransistors include silicon phototransistor and photodarlington outputs that provide high photo sensitivity for automatic mounting and position sensing equipment. OP500/501 Series and OP520/521 Series feature 150° and 160° viewing angle as well as 1.5 mW/cm² and 5.0 mW/cm² apertured power, respectively. OP525 Series and OP580 Series have 1.5 mW/cm² and 5.0 mW/cm² apertured power as well as 25° and 100° viewing angle, respectively.

Gao tek Inc.
Toronto M1B 2K4  Canada
May 13, 2008 Suitable for SM/MM types of fiber, Model GAO811 handheld visible red laser source can distinguish faults of fiber jumper, jumper board, distribution, frame, and tie-in. It also helps overcome limitation of near blind area of OTDR. Laser cannot only be reflected out from macro bend point, overlay layer, or naked fiber position, but can also be jetted from tie-in which is not linked well. Unit offers greater than 1 mW output power, low voltage warning, and automatic power off.

Process Sensors Corp
Franklin Lakes, NJ 07417
May 13, 2008 Designed for process monitoring and control for various high temperature applications, High Performance Thermal View 640N provides non-contact measurement of 2D temperature distributions with high dynamic range and spatial resolution. Continuous temperature measurement range from 600-1,500°C (2,500°C optional) is realized with array of 640 x 480 or 300,000 temperature points with measuring frequency of 25 frames/sec. Housed in SS, unit is available with optional cooling jacket.

Thinklogical
Milford, CT 06460
May 13, 2008 Designed for broadcast and post-production, ImageEvolution video processor is suited for image correction and scaling while also functioning as video converter that supports HDMI, SDI, and HD-SDI. It has Gennum VXP(TM) image processor and offers multi-mode fiber ports for video extension up to 3,280 ft. Also available, ImageEvolution HDMI Repeater for distribution of one of 2 HDMI/DVI video sources to 4 digital displays, simultaneously, with identical reproduction and no signal loss.

Optek Technology, Inc.
Carrollton, TX 75006-6905
May 13, 2008 RoHS-compliant OPA80 and OPA83 Series near-infrared light sources are available with ring sizes from 0.625 in. ID/1.25 in. OD to 1.25 in. ID/2.25 in. OD. Typical forward voltage is 1.35 VF, reverse voltage per emitter is 2.0 V, with continuous forward current of 50 mA and peak pulsed forward current of 1.0 A at 1% duty cycle. Series OPA80 12 V light ring comes with ambient light sensor to minimize current consumption, while Series OPA83 5 V light ring comes without sensor.

HOLOEYE Corp.
Laguna Hills, CA 92653-1340
May 12, 2008 Based on reflective LCOS microdisplays with 1,920 x 1,080 pixel HDTV resolution, PLUTO phase only spatial light modulators feature pixel pitch of 8.0 µm, image refresh rate of 60 Hz, and pure phase shift of 2 Pi up to 1,550 nm. PLUTO-VIS, PLUTO-NIR, and PLUTO-TELCO are optimized for 420-850, 850-1,100, and 1,550 nm wavelengths, respectively. They are suitable for applications such as wave front correction, optical tweezers/metrology, interferometry, lithography, or holography.

Agilent Technologies, Inc.
Palo Alto, CA 94303
May 12, 2008 Facilitating design and validation testing, 86116C Option 025 provides reference receiver capabilities for 100-G Ethernet and 16X Fibre Channel signals. Module works with 1,310 nm and 1,550 nm single-mode transmitters, and characteristically has 45 GHz optical and 93 GHz electrical unfiltered bandwidth. Used in 86100C DCA-J oscilloscope mainframe, unit helps engineers investigate, design, and verify performance of transceivers that terminate optical fibers for LANs and SANs.