|
|
|
|
|
Optics & Photonics
(Showing headlines 581 - 600) << 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 ...
|
 DVI Extender works via single-strand fiber optic cable.Network Technologies, Inc. (NTI)
Aurora, OH 44202
Jul 23, 2010
Comprised of transmitter and receiver, XTENDEX® DVI Extender (ST-1FODVI-SC) locates single link digital DVI display up to 3,280 ft from computer using single-strand SC multimode fiber optic cable. EDID learning enables support of any DVI display device as well as resolutions up to 1,920 x 1,200. For sensitive applications, one strand of multimode SC fiber optic cable transmits signal without RF interference. Form factor facilitates connection and placement.
|
3Com-Compatible Transceiver is designed for 850 nm mulitmode fiber.GAO FiberOptics Inc.
Toronto Canada
Jul 23, 2010
Designed for multimode fiber working at 850 nm wavelength, model 3CFS91 can be used in diverse network topologies and supports SONET, Gigabit Ethernet, Fiber Channel, and other communication standards. Hot-pluggable modules provide features for physical network connectivity and can be used in conjunction with any SFP modules supported by 3Com devices. Each transceiver connects electrical circuitry of module with optical or copper network.
|
KrF Light Source delivers field-selectable power option.Cymer Inc.
San Diego, CA 92127
Jul 22, 2010
ELS(TM) 7010x Krypton Fluoride (KrF) light source lets operator adjust power from 30-50 W to accommodate changing wafer design requirements and production needs. In addition to real-time variable power flexibility that enables chipmakers to increase wafer output by up to 25%, system employs Gas Lifetime eXtension (GLX(TM)) technology to reduce system downtime during gas exchanges. Power flexibility and performance stability optimize wafer throughput.
|
 Optical Surface Profiler suits automated HB-LED production QA/QC.Veeco Instruments Inc. Corporate Headquarters
Woodbury, NY 11797
Jul 21, 2010
ContourGT(TM)-X8 PSS is optimized for characterizing high-brightness light emitting diode (HB-LED) patterned sapphire substrates (PSS). Combination of non-contact 3D measurement capabilities with Veeco PSS metrology hardware and software technology, as well as Wafer Automation System Developer's Kit (SDK) provides tailored solution for PSS QA/QC applications requiring high throughput and repeatability. TCP/IP-based remote control capabilities are also standard.
|
 DVRs use H264 video compression technology.Norbain Security
Wokingham, Berkshire United Kingdom
Jul 21, 2010
Comprised of 4, 8 and 16 channel units offering 200 ips, XDR2 range of DVRs targets projects where multiple sites with different numbers of cameras are required. RS485 telemetry aid in control of all leading CCTV domes, while set up and operation is intuitive using the mouse control. Internal DVD writer, USB memory stick and USB HDD helps in archiving. Search functions comprise of time bar search, calendar (date & time) and event/system search.
|
Photography Case features protective, hard-shell design.CaseCruzer
Montclair, CA 91763
Jul 21, 2010
Measuring 21.75 x 13.75 x 8.99 in., Model PSC100 features padded dividers, Velcro sub-dividers, and crushproof lid with interior sleeve that secures laptops from 13-17 in. Exterior is injection-molded with polypropylene copolymer resin, making case waterproof, submersible, dust-tight, and resistant to corrosion and severe impact. ATA-approved, mobile airline carry-on case additionally includes embedded wheels, extendable handle, and ambient pressure equalization valve.
|
Safety Goggles feature reading magnifiers.Uvex Safety Inc., A Bacou USA Co.
Smithfield, RI 02917
Jul 21, 2010
Available in 5 diopter strengths from +1.0 to +3.0, Uvex Stealth® Reader Goggles protect workers in detail-oriented environments. Goggles feature clear lens with Uvextreme® anti-fog coating and 99.9% ultraviolet protection. Wrap-around style delivers complete coverage and unobstructed vision, while adjustable slide headband features pivoting clips to optimize comfort, even with hard hats. Goggles meet ANSI Z87.1-2010 standard for impact protection as well as CSA Z94.3 safety standard.
|
 Absolute Encoders come in CANopen versions.Turck USA
Minneapolis, MN 55441
Jul 20, 2010
Measuring 36 mm with hollow shaft diameter up to 10 mm, F36 Series is designed without gears, making encoders completely insensitive to magnetic fields. OptoASIC technology enables resolution up to 16 bits for single-turn applications and 32 bits for multi-turn applications. Operating from -30 to 85°C, IP67-rated units are suited for drive engineering or medical technology applications.
|
 Borosilicate Fiber Patch Cables suit photonics industry.Gulf Photonics, Inc.
Oldsmar, FL 34677
Jul 20, 2010
Offered in diameters from 400 µm to 1 mm, borosilicate fiber bundles offer alternative to fused silica fibers for applications in visible and NIR wavelength range. Individual fiber diameters of 35-50 µm promote flexibility and tight radii bend, while large numerical aperture enables efficient light collection. Bundles can contain hundreds to thousands of single fibers, maximizing light collection and transmission as well as offering valuable redundancy in case of fiber breakage.
|
 FPD/LSI Inspection Microscope enhances observation capability.Nikon Metrology, Inc.
Rochester Hills, MI 48309
Jul 19, 2010
Eclipse L300N/L300ND incorporates Epi-Fluorescence function, enabling 365 nm UV excitation optimal for inspection of semiconductor resist residues on 300 mm wafers and OLEDs. While infinity optics, CFI60, promote image brightness, NA, and sample range, motorized universal nosepiece incorporates anti-flash mechanism to protect operator's eye. Other features include USB interface; 12 V, 50 W halogen illuminator; lamphouse rear mirror; and antistatic coatings.
|
 Video Measurement System utilizes TTL laser technologies.Nikon Metrology, Inc.
Rochester Hills, MI 48309
Jul 19, 2010
Featuring XY travels of 650 x 550 mm, Confocal NEXIV-K6555 covers non-contact 3D measurement requirements of large substrates, such as interposer substrates and probe cards. ZC objective lens for height measurement can obtain height data for every pixel in field of view in single scan. Equipped with 3x and 7.5x standard confocal optics, system allows for both 2D measurements on brightfield images with CNC 15x zooming optics and 3D measurements on confocal images.
|
 Compact Encoders are optimized for connectivity.FRABA Inc.
Hamilton, NJ 08609-2020
Jul 19, 2010
With interfaces for EtherNet/IP and PROFINET IRT networks, OPTOCODE encoders are suited for motion control applications and can be used in high-speed machines. EtherNet/IP models, which incorporate Ertec200 controller, have cycle times of less than 10 ms, while PROFINET IRT models support cycle times as low as 1 and 10 ms. Angular resolution is 65,536 steps per revolution (16 bits), while up to 16,384 revolutions (14 bits) can be registered in multi-turn mode.
|
Optical Light Source provides dual-wavelength outputs.GAO Comm
Toronto M1B 2K4 Canada
Jul 15, 2010
Offering modulation frequencies of CW, 2 Hz, 270 Hz, 1 kHz, and 2 kHz, Model 08231 provides 1,310 and 1,550 nm dual-wavelength outputs for single-mode fiber measurement or 850-1,300 nm for multi-mode fiber measurement. Light source is supplied with rechargeable battery and is powered via 2.5 mm FC/Universal adaptor. Handheld unit is suited for installation, construction, and maintenance of fiber optic projects, telecommunication, and CATV systems.
|
 Aberration Compensation Plates suits small fields of view.Edmund Optics
Barrington, NJ 08007
Jul 14, 2010
Used in collimated spaces and placed near pupil, TECHSPEC® plates compensate and correct known amounts of spherical aberration. Transmitted wavefront is accurate to 1/10 lambda, and plates can be combined to induce desired amount of compensatory spherical aberration in given system. Diameters of 12.5, 25, and 50 mm, in positive and negative sign plates, are available with aberrations of 0.25, 0.50, and 1.00 lambda.
|
Adapter for Optical Contacts exceeds EN4531 standards.RADIALL Inc
Chandler, AZ 85226
Jul 14, 2010
When used with MIL-C-81659B/DSX series (ARINC 404 standard) connectors, size 5 EN4531 Optical Adapter ensures optical contact performance meets and exceeds requirements of the EN4531 standard. It comes in male/female versions for either plug or receptacle DSX connectors and suits standard EN4531 multimode optical contacts. Able to be removed using standard extraction tool, 2-piece adapter aids fiber optic technology upgrades in existing interconnect applications.
|
 Converter/Extender System includes ESD protection circuitry.Electro Standards Laboratories
Cranston, RI 02921 3403
Jul 13, 2010
Designed to extend USB connections via high-speed Fiber Interface, Model 4162 Host and Model 4169 4-port Hub are suited for environments subject to high EM or RF interference that might corrupt USB communications over copper interface. Four-port hub provides USB standard of 500 mA per port. Operating from 0 to +50°C, system offers true plug-and-play operability with support for Windows®, Mac OS®, Linux® and all USB device types at up to 480 Mbps.
|
 Articulated Videoscope serves space-restrictive applications.Medit, Inc.
Winnipeg, MB R3C2B3 Canada
Jul 13, 2010
Featuring 6 mm dia, SIRIUS can articulate around corners while capturing images or video. Portable inspection device accomplished latter with 2.2 mm CMOS video camera chip located directly in tip, producing 780,000 pixels. Live images are displayed in color on 3.5 in. TFT LCD, and 4 white LED lights located in probe tip illuminate inspection area with controllable intensity. Along with 1-16 GB SD memory card, device supports USB data export and video output.
|
Detachable Optical Fiber Connector provides repeatable coupling.Mobius Photonics, Inc.
Mountain View, CA 94041
Jul 13, 2010
Designed for precision power applications such as pump light delivery and fiber coupling in commercial and industrial lasers, Meight Connector accommodates a few hundred watts of power via multimode fibers with core diameters from 50 microns to 1 mm. Large-thread hex nut guides and fastens connector in place to ensure secure mechanical connection. Suitable for fiber coupling through sealed bulkhead, connector is capable of being de-coupled without breaking bulkhead seal.
|
 Active Optical Cabling supports high performance computing.Siemon Co., The
Watertown, CT 06795
Jul 09, 2010
Intended for 40 Gbps applications, Moray(TM) 4-lane QSFP+ Active Optical Cabling Assemblies incorporate 780 mW transceiver, which utilizes Silicon CMOS Photonics technology that has integrated opto-electronic chip with directly attached fiber and micro-packaged laser. Unlike optics that utilize VCSELs and multi-mode fiber for short connections, Moray's single chip transceivers support distances from 1-4,000 m for inter- and intra-building applications.
|
 Portable SAS/SATA Protocol Verifiers operate at up to 6.0 Gbps.LeCroy Corp.
Santa Clara, CA 95054
Jul 09, 2010
Available in protocol analyzer or error injector models, STX M6-1 protocol testers operate at 1.5, 3.0, or 6.0 Gbps SAS or SATA data rates and are available with 2 or 4 GB of memory. Featuring USB and GbE interface ports for connecting to host PC, single-port units measure 6.25 x 9.0 x 1.38 in. and fit in brief case or backpack. They can be linked together to maximize recording channel capacity, or be used in tandem to combine simultaneous error injection and trace capture/analysis.
|
(Showing headlines 581 - 600) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183
|
|
|