Optics & Photonics
(Showing headlines 3521 - 3540) << 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 ...
Thermal Imaging Camera detects faulty parts and processes.
Raytheon Commercial Infrared (RCI)
Dallas, TX 75266
Aug 12, 2003 Model 500DX combines radiometric thermal-imaging camera, handheld iPAQ PDA computer, and visible-light camera. Simultaneous split screen display allows users to see and document difference between component's appearance to naked eye and appearance when viewed with thermal imager. Unit includes 35 mm focal length lens and electronic zoom function that increases view up to 16x with iPAQ PDA. Camera is suited for detecting heat produced by engines, motors, or fluids.
Beam Homogenizer heightens UV laser efficiency.
JP Sercel Associates, Inc.
Manchester, NH 03102
Aug 12, 2003
Fly's Eye Beam Homogenizer converts non-uniform beam of UV Excimer laser into homogeneous beam with 95% uniformity. Utilizing more than 80% of laser power, single element array adapts to most excimer lasers and offers working distances of 1-2 m with beam sizes of 8 mm to 1.5 cm. Product enables maximum amount of available laser power to be used, resulting in uniform, large area beam that can be subdivided using near-field imaging.
Hollow Penta Prisms offer short optical path lengths.
Barrington, NJ 08007
Aug 11, 2003
Hollow, penta prisms employ 2 coated, mirrored surfaces oriented at 45° to redirect incoming light 90° without inverting or reversing image. Products are available with visible (Enhanced Aluminum) or IR (Protected Gold) coatings. Beam deviations of 30, 10, or 5 arc seconds are available in 12.7 and 25.4 mm clear apertures. Accuracy of existing wavefront varies from 0.25-1 wave (depending on the model chosen), and mirrors are mounted in integratable package.
Power Quality Meter complies with EN50160 standards.
Westbury, NY 11590
Aug 11, 2003 Nexus 1252 performs flicker analysis, which can be damaging to equipment and humans. It provides interharmonic analysis, with logging and monitoring for short- and long-term evaluation. Incorporating DNP 3.0 protocol, unit maps up to 136 measurements to DNP Static points. Up to 16 relays and 8 resets are controlled through DNP. Meter offers high-speed transient recording, fault recording, and voltage surge and sag recording at up to 512 samples/cycle.
Laser Coder provides permanent, high-resolution marks.
Weber Marking Systems, Inc.
Arlington Heights, IL 60005 4457
Aug 08, 2003 Vector laser coder, e-Solarmark, can mark up to 1,000 characters/sec at product delivery speeds up to 560 fpm. It provides text as small as 0.020 in. high, numerous bar code symbologies, and graphic images. Selection of lenses satisfies marking fields from 2.0â€“7.8 in˛. Coder comes with controller and PC-resident software. Hundreds of formats can be created, stored, and accessed. System can mark paper, paperboard, foils, plastics, wood, glass, and coated metal.
Winders suit film and sheet applications.
Davis-Standard, Killion Specialty Systems
Pawcatuck, CT 06379
Aug 08, 2003
Suited for winding rolls up to 29 in. wide for narrow web production, Killion KXE winders are offered in single, dual, and multi-shaft versions with fixed or turret configurations. Options include cone or air shaft core location and collapsible mandrels. Supplied with cantilevered shaft, products operate as self-contained, compact units and may be used on any width line for line speeds up to 100 m/min.
Video Measuring System offers stage scale resolution to 0.01µm.
Nikon, Inc. Instrument Group Div.
Melville, NY 11747
Aug 07, 2003
NEXIV VMR-H3030 utilizes VMR-Z120X Maximum Magnification Module with magnifications from 36-4,320x. Through-the-lens laser focusing system allows user to scan complex profiles of 3D precision parts at 1,000 points/sec. The 15x Telecentric Zoom System facilitates searches at low magnifications. Software provides intelligent search functions that eliminate possible measurement errors, and multi-pattern search function, which automatically corrects part-to-part variations.
Tap Aligning Center simplifies hand tapping.
Harahan, LA 70123-4132
Aug 06, 2003 Equipped with No. 2 Morse taper, Tap Aligning Center has spring center used to align taps when hand tapping in lathes or drilling machines. Suited for awkward tapping operations, product does not require user to constantly adjust center. Physical characteristics include hardened 5/16 in. dia center, 1 in. plunger travel, and overall length of approximately 5˝ in.
Optical Encoders suit applications needing size 15 servo mount.
Vancouver, WA 98682 8713
Aug 06, 2003 Models H15D and H15S are non-contacting, rotary to digital position feedback devices with 2 radial ball bearings and standard Ľ in. diameter shaft. Units may be mounted and held in position by 4â€“40 machine screw holes in base, or by using attached servo ring and separate servo cleats. Both encoders allow for polarized connector that latches directly into encoder, while only H15D features internal RS422 differential line driver.
Laser Alignment System improves manufacturing efficiency.
Pinpoint Laser Systems
Peabody, MA 01960
Aug 06, 2003
Dual-Axis Microgage 2D can measure horizontally and vertically at same time. It provides straightness, flatness, parallelism, and squareness measurements to 0.001 in. over distances of 50 ft. System will monitor mechanical misalignment and runout, align rails and slides, position machinery sub-assemblies, and align bores and drive shaft mechanisms. It can be attached to PC or laptop for collecting, analyzing, and storing machinery alignment information.
Sampling Chamber characterizes optical substrates.
Ocean Optics, Inc.
Dunedin, FL 34698
Aug 05, 2003 Variable-angle Reflection Sampling System couples to spectrometers and light sources to measure spectral reflectance of optical substrates from 200â€“1,100 nm at angles of incidence from 10° to 50°. Modular, optomechanical device has black anodized stainless-steel chamber with 2 ports for SMA 905-terminated optical fibers. Its 3-point fixed surface mount retains sample position, while thumbscrew locks optical assembly at fixed angle.
Microscope Objective is optimized for confocal microscopy.
Leica Microsystems, Inc.
Buffalo Grove, IL 60089
Jul 31, 2003
Optimized for confocal microscopy and depth imaging of glycerol-embedded specimens, PL APO 63x 1.3 Glycerol HCX CS (Confocal Scanning) offers imaging performance on and below surface of specimens matching closely to refractive index of glycerol. Product minimizes spherical aberrations and offers working distance of 280 µm. Apochromatic confocal scanning correction assures precise registration of focal planes and fluorescence emissions across visible spectrum.
Vector Spectrum Analyzer offers 80 MHz analysis bandwidth.
Agilent Technologies, Inc.
Santa Clara, CA 95051
Jul 25, 2003
Model PSA-80BW combines Model E444X PSA spectrum analyzer and Model 89610A vector signal analyzer. It provides 8 sec capture memory, up to 20 GHz frequency coverage, 0.1 dB amplitude flatness, and 0.7° phase flatness. Wide bandwidth and long capture period results in thorough signal characterization and improved digital predistortion measurements. Unit suits multi-carrier power amplifier, signal monitoring, radar, and satellite measurement applications.
Comparison Microscope is suited for forensic examiners.
Leica Microsystems, Inc.
Buffalo Grove, IL 60089
Jul 25, 2003
Leica FS4000 Forensic Solution Microscope enables trace evidence comparisons in forensic science laboratories. Comparison bridge integrates tilting binocular tube that promotes ease of reach with natural body position. Automation and motorization of comparison bridge allow one-button activation of comparison methods and movement of image splitting line. Product features two DM4000 B digital microscopes, automatic light management, and integrated Variolux color module.
Laser Podules provide output from 20-100 W.
Northville, MI 48167
Jul 23, 2003 Spectron diode-pumped, solid-state (DPSS) Laser Podules use side-pumped geometry, which consists of Nd:YAG-laser rod, located within stainless steel/ceramic pumping chamber, pumped by array of diode laser bars. Podules are driven by low-voltage electronics, ensuring that integration and certification is straightforward. Cooling is accomplished with water chiller.
Dual Sandwich Detectors are available in three types.
UDT Sensors, Inc.
Hawthorne, CA 90250
Jul 22, 2003 Suited for optical remote temperature measurements, products are independent of emissivity and unaffected by moving targets or contaminants in field of view. Compact, hermetically sealed, 2-color photodiodes feature spectral range of 400â€“1,800 nm and are available in 3 types: Silicon-Silicon, where one photodiode is stacked on other; Silicon-InGaAs, where bottom photodiode is made of InGaAs; and Silicon-InGaAs with 2-stage thermo-electric cooler.
Photodiode Arrays feature spectral range of 900-1700 nm.
Hawthorne, CA 90250
Jul 22, 2003
Series FCI-InGaAs-300B1XX multifunctional, backside-illuminated photodiode/arrays come standard as single element, 4-, or 8-element arrays. Sensors are designed for flip chip or traditional mounting to optical plane for front or back illumination. They are available with or without ceramic substrates and are suitable for micro-electronic applications, power monitoring, fiber optic receivers, and analog receivers.
Signal Isolator/Splitter offers full optical isolation.
Absolute Process Instruments Inc.
Libertyville, IL 60048
Jul 17, 2003 IsoSplitterâ„˘ 4393 dc/dc transmitter accepts one dc voltage or current input and provides 2 optically isolated dc voltage or current outputs. Input and output ranges can be independently configured to requirements. Unit includes LoopTracker® LEDs for input/output monitoring and functional-test button for testing output, independent of input signal. It is suitable for systems with multiple devices on same process loop, including PLCs, DCS, BAS, panel meters, and recorders.
Infrared Camera is available with with FireWireâ„˘ option.
Indigo Systems Corp.
Santa Barbara, CA 93111
Jul 15, 2003 Measuring 1.35 x 1.45 x 1.90 in., Omegaâ„˘ camera weighs less than 120 grams, consumes less than 1.5 W, and has turn-on time of fewer than 2 sec to first image. Vanadium oxide microbolometer detectors output thermal resolution of less than 40 mK when normalized to f/1.0. Camera has analog RS-170A and 14-bit digital outputs as well as one automatic function to switch into extended temperature range mode, allowing scenes to be imaged in temperatures up to 400°C.
Mini DPSS Lasers produce 5 W at 1064 nm.
Northville, MI 48167
Jul 15, 2003 Series SLD6000 low-powered, end-pumped, solid-state lasers feature direct diode coupling to Nd:YAG lasing media, providing TEM00 beam quality. Units include sealed laser head, field-replaceable diodes, as well as integral cooling, avoiding need for chillers. They offer high repetition rates, short pulses, and high peak powers for scribing, marking, inspection, and micromachining applications.
(Showing headlines 3521 - 3540) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202