American Fibertek Inc.    Somerset, NJ 08873
Oct 18, 2004 Available in singlemode and multimode configurations, 900 and 9000 Series Digital Video and Data Transceivers feature 10-bit transmission technology. Delivering near broadcast video quality, they are compatible with proprietary Afinety Remote Monitoring System as well as NTSC, RS170A, RS343A, and PAL. Models transmit video channels uncompressed, providing real-time signal performance, and diagnostic indicators provide visual indication of system status.

Keyence Corporation of America    Elmwood Park, NJ 07407
Oct 18, 2004 Integrating illumination optics and receiver circuitry in sensor head, Series CZ-V20 employs 3 separate, high-intensity RGB LED light sources, which transmit red, green, and blue light onto target surface. Fiber optic cable transmits RGB light through optical system in sensor head, producing uniform beam spot. Polarizing filter cancels reflections from glossy surfaces. Detection performance is virtually unaffected by shape, position, angle, or surface luster.

American Fibertek Inc.    Somerset, NJ 08873
Oct 18, 2004 Series 485 transmits and receives one RS485 signal over single optical fiber, while Series 487 transmits and receives two RS485 signals over single optical fiber. Units can be configured for either 2- or 4-wire operation with flip of switch. As part of product operation, transceivers can be biased or non-biased and terminated or not by selectable dip switches. Diagnostic indicators are provided for visual indication of system status.

ASI Instruments, Inc.    Houston, TX 77024 1802
Oct 15, 2004 Featuring all digital design, LaserTrak 200 measures level, position, and distance of bulk solids at up to 200 ft. Timing systems and self-correcting signal processing allow measurement in harsh conditions. Housed in NEMA 4X aluminum enclosure, unit includes stainless steel dust tubes with built-in purge port to prevent dust build-up and protect optical lens from being coated. Transmitter can be programmed with desktop/laptop PC as well as Palm or Pocket PC.

Panasonic Security & Digital Imaging Company / Vision System    Secaucus, NJ 07094
Oct 15, 2004 With on-board networking capabilities for integration into networked systems, self-contained Model WJ-HD220 provides 8 channel inputs plus camera control functionality. It offers 120 Gb recording capacity, pre-alarm screening, time lapse recording, as well as playback and monitoring capabilities. Featuring coax control up to 3,000 feet using Panasonic VD2 for dome camera pan/tilt/zoom operations, DVR also provides electronic zoom with multi-screen or spot monitoring.

Sensors Unlimited, Inc. (SUI)    Princeton, NJ 08540
Oct 14, 2004 Visible-InGaAs SU320Mvis 1.7RT MiniCamera simultaneously images in visible and short-wave infrared spectrum. With factory-set non-uniformity corrections and built-in anti-blooming, camera never needs field adjustments. It simultaneously delivers 12-bit digital RS-422 output and EIA-170 analog video output for display on commercial TV monitors. Dual sensor’s quantum efficiency is greater than 70% from 1,000-1,600 nm, greater than 50% at 800 nm, and greater than 10% at 400 nm.

FARO Technologies, Inc.    Lake Mary, FL 32746 6204
Oct 13, 2004 Portable 3D measurement system, FARO Laser Tracker X, measures large-scale parts, tooling, and machinery. It measures XYZ coordinates with laser by following hand-held mirrored, spherical probe. Three dimensional position of probe is reported in real-time. XtremeADM eliminates need for interferometer to measure distance, and enables FARO Laser Tracker X to overcome line-of-sight issues. System offers 230 ft range with up to 0.001 in. accuracy.

M2 Optics, Inc.    Los Angeles, CA 90034
Oct 13, 2004 M2 Fiber Lab 2400MX™ fiber management package features 4 LGX style module slots that house couplers, WDMs, CWDMs, additional incremental fiber, fixed or variable attenuators, and a portable latching optical switch module. Available with 1, 2, 4, or 8 dB of real fiber attenuation, or 1–25 km in each of 3 attenuation areas, rack mountable or tabletop test set can be configured to emulate real fiber attenuation or length, coupling or splitting, or switching required.

Communications Specialties, Inc.    Hauppauge, NY 11788
Oct 13, 2004 Fiberlink® 6400 Series Passive Optical WDMs allow 2 separate fiber optic links to operate at different wavelengths over same fiber optic core. Each optical signal may carry multiple baseband video, audio, and data channels. Optical signals are transmitted at 850 and 1,310 nm over multimode fiber or 1,310 and 1,550 nm over single mode fiber. Insertion loss ranges from 0.5-2.0 dB per output. Units are available in card or box versions with ST or FCPC connectors.

Ophir Optronics, Inc.    Danvers, MA 01923
Oct 12, 2004 Featuring conical probe design for maximum high damage threshold, Comet 10K-HD measures outputs from CO₂, YAG, and diode industrial laser sources. It provides absolute calibration accuracy of ±5% and repeatability of ±1% for same initial temperature. Linearity with power is ±2% from 1–10 kW. Equipped with swivel mount that rotates ±90°, Comet 10K-HD can measure laser using automatic or manual measurement mode.

Pinpoint Laser Systems    Peabody, MA 01960
Oct 11, 2004 Consisting of laser transmitter and digital receiver that is connected to handheld display, Microgage Universal Alignment Kit provides measurements of machinery rail straightness, parallelism, and surface flatness. Readings appear on LCD display and alignment units are presented in 0.001 or 0.0001 in. increments or in millimeters. Rotating base is included for checking flat planes. Interface cable allows readings to be uploaded to laptop or PC for analysis.

French Technology Press Office, Inc.    Chicago, IL 60601
Oct 07, 2004 LYDYA(TM) Q-CW and CW laser diode drivers are for single diodes, bars, and stacks, and are available with or without TE temperature controller. Computer controllable devices include diode shunt that remains plugged to diode terminals and short-circuits when diode is not used, output stage designed to avoid transients, and high power circuitry that supplies regulated adjustable current and provides over-current protection.

NLC Laser    Phelps, WI 54554
Oct 07, 2004 Hinged around Sealed DC laser technology, Integrator Series Lasers produce stable, pinpoint heat source suited for high-speed processing in non-metal applications. They provide non-contact sterile processing and can be employed for services including drilling holes as small as .002 in. in diameter, cutting, marking, perfing, sealing, and kiss cutting. Energy from one unit can be split and delivered to multiple processing points.

Applied Analytics, Inc.    Concord, MA 01742
Oct 07, 2004 Controlled via remote computer, palm pilot, or membrane keypad and LCD display on front panel, D2W-100 is combined flux of D2 and tungsten optically coupled to fiber optics. Light source is focused onto tip of fiber optics via collection optics and not direct couple. Tungsten source intensity can be controlled manually or automatically from external computer, and unit features filter wheel with 4 different filters. Source output can be compensated or uncompensated.

McPherson, Inc.    Chelmsford, MA 01824
Oct 06, 2004 Designed for 120 x 150 mm gratings, f/3.2 Model 205 is provided with 2 exit ports. Best imaging is delivered to lateral exit port, while axial port provides best resolution. Two entrance ports adapt to experiment and calibration sources. Optical coatings may be specified to optimize reflectivity or spectral agility. Additional gratings are available for operation at f/4.3 or f/6.9. Model 205 is suited for Raman, photoluminescence, or any low-light application.

Intelepresence    Cambridge, VT 05444
Oct 05, 2004 Sentinel VS-14(TM) compact, self-contained, portable video surveillance system is suited for oil, gas, and petrochemical applications. It collects evidentiary quality video, day or night, and enables real-time event detection, notification, assessment, and response. Deployable system collects intelligence where manned surveillance is unsafe and impractical. Other applications include construction sites and convenience stores.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Oct 05, 2004 Measuring 60 x 85 mm and weighing 400 g, Portable Model PGX measures wetting and absorption on any size surface. User places instrument on top of specimen, presses button, and instrument captures sequence of images to describe liquid/substrate interaction. Results are presented as static contact angle or dynamic wetting and liquid penetration as function of time. Calibration in static mode is done using virtual standard supplied.

Coherent Laser Division    Santa Clara CA 95056
Oct 01, 2004 Based on waveguide design assembled in integrated package, C-Series Lasers deliver either 55 or 70 W output at 10.6 microns and are available as air-cooled or water-cooled units. RF driver is mounted in same housing as laser head, resulting in compact system. All units feature RF supply, and Model C-70 is available in both elliptical and circular beam versions.

B & K Precision Corp.    Yorba Linda, CA 92887
Oct 01, 2004 Synthesized Bench In-Circuit LCR/ESR Meter, Model 889A, utilizes standard 115 Vac outlet as power source to test components with basic accuracy of 0.1%. It provides dc/ac voltage and current measurements as well as diode/audible continuity checks. Utilizing front panel-mounted BNC connectors and test leads, user can test variety of components such as inductors, capacitors, and resistors. Dual display permits simultaneous measurements.

VibrAlign, Inc.    Richmond, VA 23236
Sep 30, 2004 Shaft Hog, suitable for measurement and alignment of coupled rotating machines, delivers live readings from dual-laser detectors. System features laser line to facilitate setup and alignment and graduated labels on laser heads to help operator visualize misalignment condition. Visual cue reinforces digital values displayed on unit. Powered with 3 C cell batteries that provide 24 hr, continuous operation, ergonomic tool can be operated with one hand.