Acromag, Inc.    Wixom, MI 48393 7037
Oct 04, 2012 At 12.5 mm wide, signal conditioners comprising TT230 series, suitable for high-density mounting on DIN rails, includes models to isolate and convert thermocouple, RTD, voltage, or current input signals to 4–20 mA output. Each model accommodates various signal types, and USB connection to PC aids configuration using Windows® software. These loop-powered instruments support both source or sink output wiring connections on current loop with 12–32 Vdc supply.

Wikoda, Inc.    Concord, MA 01742
Oct 04, 2012 Utilizing heliostat technology, PV Tracker can hold up to 200 W of solar PV panels. Dual-axis active solar tracker is self-powered with onboard solar cells, and entirely self-contained with all sensors, computers, and geared motors onboard. Bend-don't-break technology allows system to weather-vane in wind should excessive wind speeds occur. With PV Tracker, panels can perform at maximum efficiency and can therefore increase energy output by up to 100%.

Ophir Optronics, Inc.    Wilmington, MA 01887
Oct 04, 2012 Designed for continuous 24/7 use, Model M²-200 features CCD camera that works with pulsed or CW lasers ranging from 266–1,300 nm. Portable ISO 11146 compliant system measures M², beam waist location and width, divergence, astigmatism, asymmetry ratio, and Rayleigh range for each axis. Input beam sizes can range from 0.5–10 mm. For beams that are too large or too small, or for wavelengths outside standard optical train, manual mode is available.

Rohde & Schwarz Canada, Inc.    Ottawa, ON K2V1C7
Oct 03, 2012 Designed for power classes up to 10 W, RS MLx helps optimize coverage of DVB-T/DVB-T2 networks and affords flexibility when selecting installation site. Modular solution measures 250 mm deep, integrates up to 6 transmit channels in one system, and offers flexible configuration options for various applications and receiving conditions. Transport stream can be fed via coaxial cable or satellite; UMTS is also supported for monitoring broadcast operations.

Volk Optical, Inc.    Mentor, OH 44060
Oct 03, 2012 Surgical Gonio Lens provides clear anterior chamber angle images for Micro-Invasive Glaucoma Surgery (MIGS) and goniotomy procedures. With 1.2X image magnification, Volk optics lens delivers crisp, high-resolution views. Compatible with both steam and gas sterilization, lens is constructed to withstand repeated sterilization cycles without image degradation over time. Universal positioning handle moves to accommodate left- and right-handed or center positions.

EXFO    Quebec G1M 2K2  Canada
Oct 02, 2012 Designed for in-service FTTH fiber testing, monitoring, and troubleshooting, FG-750 Node iOLM can test point-to-multipoint fibers, or run downstream tests from node or central office to any passive optical network line type. Based on patented Link-Aware technology, Node intelligent Optical Link Mapper can perform online quality control of contractual work and use same equipment for isolating and pinpointing optical-layer impairments.

CCTV Camera Pros    Lantana, FL 33462
Sep 28, 2012 Featuring 5 megapixel image sensor and adjustable 4.5–10 mm varifocal lens, Geovision GV-BX520D-E Arctic Weather Security Camera supports up to 10 fps at video resolution of 2,560 x 1,920. Unit can be accessed via iPhone, iPad, Android, and 3GPP mobile devices. Weatherproof enclosure enables operation in temperatures as low as -40°F. For low light or totally dark environments, POE 802.3at compliant camera has 50 ft IR range to maintain high definition recording 24/7.

CCTV Camera Pros    Lantana, FL 33462
Sep 28, 2012 Featuring 5 megapixel 1/2.5 in. progressive CMOS image sensor and 3.6–9 mm varifocal lens, Vivotek FD8372 captures 2,560 x 1,920 resolution video at 10 fps. Smart Focus System with built-in stepping motors lets user dial in optimal viewing angle, while WDR Enhancement feature accommodates environments with constantly changing lighting conditions. Able to be used outdoors due to its IP66 housing, camera also offers removable IR cut filter, 65 ft IR range, and POE 802.3af compliance.

OFS FITEL LLC.    Norcross, GA 30071
Sep 28, 2012 Water resistant to IPX2 and dust resistant to IP5X, FITEL® S123 Clad Alignment Splicer, S153 Active Alignment Splicer, and S178 Core Alignment Splicer have built-in battery recharger that operates during fusion splicing. Selectable display layout lets users select preferred display style – conventional, side-by-side, or top-to-bottom comparison – for viewing fiber image during splice operation. Integrated LCD monitors promote visibility while windshield is open.

OFS FITEL LLC.    Norcross, GA 30071
Sep 28, 2012 HomeRun™ accelerates and facilitates lower loss fiber deployment in multiple dwelling unit (MDU) buildings. Using drop cabling bundled in factory with low friction sheath, 6 or 12 compact drop cables can be pulled up riser and down hallway in one step. Mini-cord breakout cable (7 or 10 mm dia), which contains 6 or 12 EZ-Bend® fibers in 1.6 mm cords in one low-friction sheath, has one end terminated with SC or LC connectors plugged into FOX Solution® 144 FDH, 64 min-FDH, or Slimbox™ terminal.

Olympus Europa Holding GmbH    Hamburg 20097  Germany
Sep 27, 2012 Designed for live cell imaging and clinical analysis, IX3 Series includes fully automated Model IX83 for high-end research; Model IX73, which can be configured in manual, semi-motorized, or motorized modes; and Model IX53 with fluorescent capabilities for examination of tissue samples. Models IX73 and IX83 have swappable deck design, which allows optical modules to be slipped in and out as needed, including magnification changers, filter turrets, and right side port.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Sep 27, 2012 Series TIC translates measured levels of IR radiation given off by objects into visuals on 2.5 in., 160 x 120 resolution LCD. For increased temperature differentiation, camera can automatically adjust color band for narrower range of temperatures throughout -4 to +482°F range. Aside from taking spot measurements, unit can also be set for isothermal, area, or profile analysis. Li-Ion battery and charger, docking station, SD memory card and reader, and reporting software are included.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Sep 26, 2012 Housed in SOP-4 mini-flat package, Series VOM617A and VOM618A feature input currents of 5 mA and 1 mA, respectively. Each includes 9 current transfer ratio ranges from 40–600%. Equipped with GaAs IR emitting diode that is optically coupled to silicon phototransistor, devices are designed for isolated feedback loops, I/O isolation, and isolation in switchmode power supplies, AC adapters, and motor drivers. Package provides 3,750 Vrms isolation voltage and creepage/clearance distance of ≥ 5 mm.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Sep 25, 2012 Featuring respective input currents of 5 and 1 mA, VOM617A and VOM618A series each offer phototransistor output and 9 current transfer ratio (CTR) ranges from 40%–600%. Products are designed for isolated feedback loops, I/O isolation, and isolation in switchmode power supplies, AC adapters, motor drivers, solar invertors, networking switches, and telecom line cards. Optocouplers protect equipment users from electrical shocks and protect MPUs from being damaged by voltage spikes.

NTC America Corporation    Novi, MI 48377
Sep 24, 2012 Comprising 3 models, TLH Series features fiber optic beam delivery with 2, 3, and 4 kW power options. Five-axis, 3D fiber laser processing machines provide X, Y, and Z axis travel up to 177, 45, and 20 in., respectively, with positioning and cutting accuracy of 0.0015 in./19.68 in. With controllable optical head angles of +720° on C axis and rotation of +135° on A axis, systems are suitable for cutting thin gage mild steel, aluminum, or stainless steel, and work best with materials less than 3/8 in.

OFS    Huntingburg, IN 47542
Sep 24, 2012 With auto-slack storage and plug-and-play design, EZ-Bend® InvisiLight™ helps FTTH providers deploying compact Optical Network Terminals (ONTs) into subscriber homes. Optical micro-cord, with 1 mm dia, blends with interior decor. Installer rolls and adheres micro-cord into grooves between ceilings and walls, walls and moldings, corners between walls, or directly on moldings. Solution conforms to contours and corners with negligible signal loss.

Edmund Optics    Barrington, NJ 08007
Sep 21, 2012 Consisting of precision rods and plates, TECHSPEC Cage System Linear Translation Assemblies offer alternative to complex optical alignment systems, and allow user to construct custom, adaptable opto-mechanical component systems with limitless options for modification. In addition to building customized digital fluorescence microscopes or autocollimators, system can create Michelson Interferometers, allowing for adjustment of all instrument parameters.

Testo Inc.    Sparta, NJ 07871
Sep 21, 2012 Providing thermal sensitivity of <50 mK and image quality of 160 x 120 pixels, which can be increased to 320 x 240 pixels with SuperResolution technology, hand held Testo 875i is capable of identifying small details and slight temperature differences. Thermal images are visualized in real-time on 3.5 in. display, and detailed image analyses and reports can be carried out on any Windows PC. Verbal notes may be captured by thermographer and archived as part of image file via headset.

Oclaro    San Jose, CA 95134
Sep 20, 2012 Designed to meet needs of 100G networks for core, metro, access, enterprise, and datacenter, interoperable second-generation 100G CFP (Centum Gbps form-factor pluggable) transceiver and first-generation CFP2 100G transceiver are intended for 10 km transmission over standard single-mode fiber. CFP benefits from CMOS gearbox IC delivers 16 W and utilizes TOSA and ROSA technologies, while CFP2 has 4 electrical lanes with 25 Gbps electrical interface per channel and no GearBox.

GAO FiberOptics Inc.    Toronto   Canada
Sep 17, 2012 Built to be rugged, portable C0270001 combines attenuator and optical power meter functionality, works with typical 9/125 single mode fibers, and offers interchangeable FC and PC connectors. Unit is suited for use in fiber link certification and routine maintenance regarding digital system communication devices, such as PHD and SDH, as well as analog modulation CATV systems. Standard features include low battery indication, on line attenuation, and stepwise attenuation of 0.05 dB steps.