TR Electronic, Inc.    Troy, MI 48099
Aug 06, 2009 Ethernet/IP LE-200 Laser Distance System incorporates phase-shift differential technology for optimized accuracy and reliability. It is also available with Profibus and CAN interfaces in addition to various operating distances as well as cooling and heating options. Applications include loop control, coil diameter measurement, automated warehousing, level and material control in silos, crane positioning, and general material handling of parts or containers.

JAI, Inc.    San Jose, CA 95134
Aug 06, 2009 Suited for defense and military security as well as industrial applications, monochrome Models TM-770, TM-773NIR, and TM-775NIR feature 2/3, ½, and 1/3 in. sensors, respectively. Units have SNR of less than 55 dB, standard 768 x 494 TV resolution, and EMI emissions at 12 dB below max limit for Class A products. All camera features can be controlled via RS-232 commands over single interface cable. Measuring 32 x 42 x 48 mm, units support C-mount lenses with adjustable back focus.

Crestron Electronics, Inc.    Rockleigh, NJ 07647
Aug 05, 2009 Allowing HDMI device to be added in analog room, HD-TX1-F and HD-RX1-F units extend uncompressed HDMI and IR/RS-232 control signals up to 1,000 ft over single multimode fiber connection. They can also connect 2 HDMI switchers in different parts of building so source or display device can be located remotely from central equipment. Pairs include universal IR repeaters with range of up to 192 kHz, bidirectional RS-232 extenders up to 115k Baud, and 12 Vdc power pack.

Hexagon Metrology Inc.    North Kingstown, RI 02852
Aug 05, 2009 Optimized for use within 300 m from base unit, TDRA6000 has ability to automatically target reflective tape targets and corner cube reflectors, as well as measure without targets. Typical 3D point accuracy at 35 m is .25 mm with reflectors, while reflectorless accuracy is 1 mm. Offering submicron level fine positioning, device incorporates proprietary piezo direct drive technology to deliver high speed motorization and acceleration. Built-in Bluetooth connection aids data transfer.

FEI Company    Hillsboro, OR 97124
Aug 04, 2009 Designed for Titan(TM) and Tecnai(TM) transmission electron microscopes, Falcon(TM) Direct Electron Detector enables acquisition of low-noise images of delicate biological samples and other beam-sensitive materials that require low electron dose interactions to prevent radiation damage of material. Offering 4 K x 4 K resolution, detector allows life scientists to see biologically significant detail that could not otherwise be seen.

Electromatic Equipment Co., Inc.    Cedarhurst, NY 11516
Aug 03, 2009 Featuring 7 super bright LEDs mounted in precision-machined aluminum head with optimized optics, CHECKoLINE® DS-2000LED delivers flash brightness of 1,500 lx at 6,000 fpm. It can operate continuously at maximum flash rates for up to 11 hr using 3 AA batteries. User-programmable settings include flash duration, phase shift, delay, and units (fpm or Hz). Housed in high-impact plastic case, rugged handheld unit suits speed, motion, and vibration analysis on rotating shafts, fans, or cams.

GAO Embedded Inc.    Toronto 12345  Canada
Jul 30, 2009 Combining functions of optical power meter and light source into single compact unit, Model A0670010 is designed for telecom and CATV maintenance, passive device manufacturing, and for lab testing and research. It features high resolution LCD and allows users to carry out loop-around tests. Each module can also work independently via function switch operation, suited for field-testing. Optical light source offers multiple optional wavelengths at 850, 980, 1,300, 1,310, and 1,550 Nm.

FEI Co.    Hillsboro, OR 97124-5830
Jul 28, 2009 Suited for high-volume industrial and multi-user research laboratories, 200 kV Tecnai Osiris(TM) scanning/transmission electron microscope features ChemiSTEM technology, which minimizes time required for large field-of-view energy dispersive x-ray elemental mapping. Microscope also includes MultiLoader(TM) sample handling to minimize thermal equilibration time after sample exchanges, FS-1 electron energy loss spectrometer, SmartCam remote control camera, and liquid nitrogen supply.

AMETEK, Advanced Measurement Technology, Inc.    Oak Ridge, TN 37831-0895
Jul 27, 2009 Completely operable without PC, DigiDART-LF provides users with portable SMART multi-channel analyzer for sodium iodide, lanthanum bromide, and other scintillation detectors. Various measurements can be performed directly in-field or on-site, and internal memory stores spectra. Built-in LCD and control keypad create live display as data is acquired, while design promotes digital stability, optimized data throughput rates, and up to 12 hr of operation from one battery charge.

Gamma Scientific    San Diego, CA 92123 1876
Jul 24, 2009 Designed for testing and calibrating various optical instruments, color-tunable RS-5H features 16-bit linear digital brightness control. It can output saturated blue, green, and red; achieve thousands of lux brightness levels; and simulate different illuminants including A, C, D65, and E. Unit is suited for semiconductor image sensor testing, as well as highway safety and military applications, and as illumination source for light boxes or automotive testing.

Fiberguide Industries, Inc.    Stirling, NJ 07980
Jul 24, 2009 Using modified core preform that protects fiber from damaging effects of deep UV, Solarization Resistant Fibers can handle spectroscopy, lithography, and excimer laser delivery applications where fibers are exposed to deuterium lamp transmission (190-230 Nm) or ArF-Excimer (193 Nm) laser. They provide long-term stability at 30-40% transmission for 215 Nm. Fiber core sizes can be produced from 50 to greater than 1,000 µm. Custom cabled or multi-fiber assemblies are also available.

Semrock Inc.    Rochester, NY 14624
Jul 23, 2009 Available for 405/532/635 nm wavelengths, filters combine polarizer and bandpass filter in one optical component. Contrast ratio exceeds 1,000,000:1, and bandpass characteristics include transmission of greater than 93% with steep edges and high out-of-band blocking. Optical quality of ion-beam sputtered thin film technology minimizes scatter, wavefront distortion, and beam deviation. Available with 22 mm and larger aperture, optical components also feature 90º beamsplitter ability.

Ambios Technology Inc.    Santa Cruz, CA 95060
Jul 23, 2009 Suited for surface measurement and analysis, Model AFP-200 includes atomic force microscope, which permits atomic scale resolution over fields of view from 10's of nanometers to 80 microns in X and Y. System's interferometer operates like traditional optical microscope with nanometer resolution in Z over fields of view from 100 x 100 microns to 2.0 x 2.0 mm. Stylus profilometer can operate in single line scan mode and in ultrahigh resolution mode using PZT scanning mechanism.

FEI Company    Hillsboro, OR 97124
Jul 22, 2009 Helios 1200 Full Wafer DualBeam(TM) System accelerates time to data for failure analysis, process development, and process control in semiconductor and data storage manufacturing. System combines scanning electron microscope image resolution and fast switching between imaging and ion beam milling to deliver cross-sectional analysis of structures and defects. Included iFAST automation software optimizes quality and consistency of multiple, site-specific samples in single session.

Tower Optical Corp.    Boynton Beach, FL 33426
Jul 22, 2009 Intended for microscopes with standard 38 mm ISO photoport, CC-1X provides clear aperture of more than 20 mm that allows use of larger CCD arrays in scientific and industrial imaging cameras. It permits use of video CCD cameras to capture images during research and development, failure analysis, scientific investigation, as well as other microscopy applications. With magnification factor of 1.0X, coupler helps increase field-of-view and light transmission of microscope image to camera.

HARTING, Inc. Of North America    Elgin, IL 60123 5538
Jul 21, 2009 Comprised of outdoor rated fiber optic cable pre-assembled with outdoor rated PushPull LC connector, LC fiber optic cable assemblies achieve low loss over long distances with high data-carrying capacity. They feature 2-fiber multimode, wavelength of 850 and 1,310 Nm, and are immune to electromagnetic interference (EMI). IP65/IP67 rated, ready-to-install cable assemblies are offered in various lengths, as well as in single-ended versions.

LumaSense Technologies    Santa Clara, CA 95054
Jul 21, 2009 Suited for variety of building inspection applications, radiometric thermal imaging camera MikroSHOT(TM)-B features measuring range of -20 to 100°C, operating temperature range of -15 to 50°C, and color alarm. Both infrared and visible images can be taken and radiometric data can be displayed directly on visual image. Weighing only 10.5 oz, camera uses AA rechargeable batteries and features 2.7 in. display, 160 x 120 pixel resolution, SD card, and USB and video output capability.

TITAN TRACKER    Toledo   Spain
Jul 21, 2009 Designed specifically for utility-scale Concentrating Solar Power (CSP), Model 125-129 STIRLING features geometry and continuous tracking that lend to reliability by negating stresses produced by thousands of starts and stops. Each structure includes 2 parabolic dishes with high-reflectance mirrors surface of 65.4 m², and accuracy is better than 0.01°.

CRAIC Technologies Inc.    San Dimas, CA 91773
Jul 20, 2009 Combining advanced microspectroscopy with sophisticated software, QDI 2010 Film(TM) non-destructively measures thickness of thin films of photovoltaic cells by either transmission or reflectance. With sampling areas ranging from over 100 microns across to less than 1 micron, instrument can analyze many materials on both transparent and opaque substrates. Features such as contamination analysis and transmissivity testing can be added to instrument.

OmniVision Technologies, Inc.    Sunnyvale, CA 94089
Jul 20, 2009 AutoVision OV9715 camera features zero degree micro lens shift and 1,280 x 800 pixel array. Based on OmniPixel3-HS(TM) architecture, ¼ in. unit offers low light performance at 3,300 mV/lux-sec and provides full-frame, subsampled, or windowed 8-bit/10-bit images in raw RGB format via digital video port. Sensor delivers full-frame HD video at 30 fps and VGA at 60 fps and incorporates various image processing functions. Operating temperature range is -40 to +85°C.