Timbercon, Inc.
Lake Oswego, OR 97035
Aug 18, 2008 Featuring transmit, receive, computer interface, reference clock, and power supply ports, XFP Host Test Board enables programming and testing of XFP Electric Loopbacks and XFP transceivers prior to incorporation into equipment. Users can also analyze design changes or system modifications made to existing equipment. Electrically transparent board uses Rogers 3003 PC board material and single-ended micro-strip transmission lines.

Pinpoint Laser Systems
Peabody, MA 01960
Aug 15, 2008 Computer Interface Module, designed for Laser Microgage 2D Alignment System, can be added or removed at anytime by disconnecting interface cable. Pinpoint Capture software is included for selecting and collecting data. It lets users scale measurement readings, apply offsets, change preferred measurement units, and view readings in numerical or graphic formats. Limit settings and indicators are also available, and measurement recording can be done via continuous or trigger modes.

AMS Technologies AG
Munich 82152  Germany
Aug 14, 2008 Isolators rated for up to 30 W are offered with Large Mode Area (LMA) Single Mode (SM) fiber pigtail on one side and collimated free-space beam on other. Alternatively, 50 W design is available as free-space version. Both versions are suited for use in fiber lasers, amplifiers, and CATV systems. Further isolators, fiber coupled and free-space, are available for lower powers and wavelengths from 488-1,600 nm.

Berkeley Varitronics Systems
Metuchen, NJ 08840-1217
Aug 14, 2008 Used for drive-study analysis, Tortoise(TM) contains ultra-clean, Class A amplifiers for simultaneous, dual-band independent transmissions from one portable unit. Four fans provide cool operation, and internal dual amplifiers simultaneously transmit up to 45 W each. Along with direct and remote control capabilities, unit offers built-in over-voltage protection, forward/reverse power measurement, and internal/external temperature measurements. Optional WiMAX modulator is also available.

FLIR Systems, Inc.
Wilsonville, OR 97070
Aug 13, 2008 Including bright 2.8 in. LCD display, FLIR i5 handheld infrared camera measures temperatures up to 480°F while detecting temperature differences as small as 0.10°F. It comes with QuickReport image analysis and report writing software, 512 MB mini SD Card, rechargeable battery and charger, USB cable, hand strap, and manuals and user CDs which are available in 21 languages. Unit is suited for commercial, electrical, mechanical, and building trade applications.

QNAP Systems, Inc.
Taiwan   China
Aug 12, 2008 Green VioStor NVR (network video recorder) series provides complete support for Sony IP-based security cameras, providing real-time audio and video monitoring and recording with optimal quality. Single-bay VioStor-101 and dual-bay VioStor-201, both designed with professional network surveillance and storage technologies as well as central management software, respectively maintain up to 4 or 8 cameras simultaneously from different locations. Multiple recording modes are available.

X-Rite, Inc.
Grandville, MI 49418 2567
Aug 12, 2008 By analyzing unique, 3D mathematical models, xDNA® system helps automakers and their suppliers distinguish applied characteristics of metallic flake, pearlescent, and other effect paints. Package includes MA98® handheld 31-point spectrophotometer and X-ColorQC® software package. Functionality lets users troubleshoot shop floor problems, assess adjustability of existing equipment for new process, and predict whether person will be able to perceive difference in color and appearance.

ComNet
Danbury, CT 06810
Aug 11, 2008 Fiber optic Models FVR11 and FVR10 receive single baseband video channel as optical signal from up to 2.5 km, and convert signal back to baseband video for monitoring. Model FVR10 features manual gain adjustment, whereas Model FVR11 offers automatic gain control that adjusts changes in camera output that might degrade video quality.

Hamar Laser Instruments, Inc.
Danbury, CT 06810
Aug 11, 2008 Model S-670 3-axis system fits 1-5.5 in. shaft dia, stores up to 500 files, and includes 1-axis super-linear PSD technology with 1 micron resolution. Featuring bracket sets for 1-10 in. shaft dia, S-680 5-axis system has 1,000+ file capacity and 2-axis PSD technology with 0.5 micron resolution. Both systems have measuring range of 30 x 10 mm. Dual Beam(TM) Detector technology allows measurement of center and angle simultaneously with only 1 PSD.

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Aug 11, 2008 Delivering 28 W of output at 355 nm, AVIA(TM) 355-28 is targeted at micromachining applications in semiconductor fabrication and packaging as well as solar cell production. It features PosiLock(TM) technology for achieving repeatable spot positioning at work surface, and PulseEQ(TM), which provides constant pulse energy across wide range of rapidly varying pulse repetition rates. Unit also includes automated harmonic crystal shifter to maintain constant output power.

Amphenol Corp., Amphenol Aerospace
Sidney, NY 13838
Aug 08, 2008 Designed for use in ruggedized and environmental applications, fiber optic connectors use MIL-DTL-38999 Series III connector with special insert that accommodates commercially available MT fiber optic ferrules. Each MT ferrule can accommodate up to 24 fiber optic channels for total of 96 circuits in connector shell size 21 package.

Intense Ltd.
Glasgow   United Kingdom
Aug 08, 2008 Delivering 75 W of peak power from 200 x 10 µm aperture, Series 2675 Epi-Stack is 905 nm short pulsed diode laser that is designed for low duty cycle operation, typically 200 ns, 2 kHz, at operating temperatures of -40 to +85°C. Single, monolithic chip combines 3 epitaxially grown emitters enclosed in rugged, hermetically sealed, 5.6 mm TO56 package. It targets aerospace, defense, and industrial applications such as LiDAR, range finding, and geoscanning-mapping.

Flir Systems, Inc.
North Billerica, MA 01862
Aug 07, 2008 With picture-in-picture FUSION, Models B-250 and B-200 enable users to overlay infrared image directly over corresponding visible image with push of button. Done in real-time, overlay function can be adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections. Model B-250 offers touch screen capability for sketching diagrams and marking images.

Newport Corp.
Irvine, CA 92606
Aug 07, 2008 Constructed of all-stainless steel, PS-Q Pedestal Post Cube lets researchers mount PS Series Pedestal and Extension posts at 90° angle and create stable, multidimensional structures. Cubes are stacked and aligned onto posts using PS-Q-A thread adaptor that fits into either of 2 counterbores on cube. Thread adaptor enables cube to be rotated to same orientation as any of cubes below it while also providing threaded hole on top of cube for further stacking of posts or other cubes.

Newport Corp.
Irvine, CA 92606
Aug 07, 2008 Excelsior®-594 Laser is multilongitudinal mode laser suited for Flow Cytometry and microscope and DNA sequencing applications that rely on exciting fluorescent dyes, such as Texas Red. Stand-alone, low-power, continuous wave laser features integrated active light loop for output power stability over wide temperature range.

Seoul Semiconductor
Geumcheon-Gu 153-801  Korea (south)
Aug 07, 2008 With life expectancy that exceeds 50,000 hrs, Models CAWT722-S and CWT722-S LEDs have high color rendering index (CRI) and are suited for indoor lighting. Warm white Model CAWT722-S has CRI of 96 and achieves 68 lm/W, while pure white Model CWT722-S has CRI of 92 and produces 70 lm/W. Both models measure 6.0 x 5.0 x 2.5 and have viewing angle of 120°.

GE Co., GE Consumer Products
Louisville, KY 40225
Aug 04, 2008 Based on IEC 61850 and intended for protection and control systems, Multilin HardFiber System is made up of HardFiber Brick, HardFiber Cross Connect Panel, HardFiber Outdoor Fiber Cables, and Universal Relay IEC 61850 Process Card. System eliminates need to install and maintain thousands of copper wires used for signaling and monitoring in electrical substations, and provides identical interface to all primary system equipment.

JAI, Inc.
San Jose, CA 95134
Aug 04, 2008 Built around Sony ICX625 2/3 in. CCD sensor, Models BM-500GE (monochrome) and BB-500GE (raw Bayer color) can operate at 15 fps with full 5 megapixel resolution. Units feature Sequence Trigger Mode, which allows users to pre-define on-the-fly changes to gain, shutter, and/or region of interest settings for repeating sequence of up to 10 consecutive triggers. They also feature auto-iris lens control and programmable I/O ports for connection with external factory automation equipment.

Agilent Technologies, Inc
Santa Clara, CA 95051
Aug 04, 2008 Developed to work with laser-based tools in microscopy market, Multi-Wavelength Laser Combiner provides 19 wavelength options that can be used in 3- to 8-channel configurations. Combiner is based on complex monolithic optic design, which incorporates many individual optical components into one monolithic structure. Since optics are bonded into pre-aligned structure, they do not drift out of alignment due to vibration or fluctuations in ambient temperature.

McPherson, Inc.
Chelmsford, MA 01824
Aug 01, 2008 With ability to test varied long- and short-wavelength UV regions, Ultraviolet Photon Excitation system provides in-laboratory access to vacuum-ultraviolet for material analysis, spectral calibration, and photo-excitation spectroscopy. It combines properties of computer optimized, all-reflective, spectrally tunable monochromator with MgF₂ window Deuterium and/or windowless hollow cathode light source. Light source emission wavelengths include 30.4, 58.4, 73.7, 102, and 121.6 nm.