Tracks

Related Categories
Material Handling & Storage, Mounting & Attaching Products

Overhead Robot Tracks support speeds up to 2.5 m/sec.

September 4, 2014

Built with linear motion components, Trackmotion TMO Systems come in 3 types designed specifically for elevated, wall, and inverted ceiling robot orientations. Four sizes accommodate smallest robots up to models in 2,500 lb range or static loads up to 5,000 lb. Cross beams are slimmer and more rigid with closer tolerances for machining and parts. Completely enclosed to keep contaminants out, heavy-duty roller bearings offer extended maintenance cycles. Read More

Robotics, Mounting & Attaching Products

Overhead Robot Tracks handle static loads up to 5,000 lb.

August 11, 2014

Built with linear motion components, Trackmotion TMO Series includes 3 types designed for elevated, wall, and inverted ceiling robot orientations. Four sizes accommodate smallest robot up to 2,500 lb range or static loads up to 5,000 lb. Rated for speeds up to 2.5 m/sec with acceleration of 2.5 m/s², tracks can be configured in any length, with multiple carriages and straight, cantilevered, and bridged leg options. Heavy duty roller bearings are completely enclosed to keep contaminants out. Read More

Material Handling & Storage, Mounting & Attaching Products, Construction Equipment & Supplies

Crawler Dozers feature automatic blade control.

January 30, 2014

In automatic mode, iMC Crawler Dozers perform rough dozing as well as finish grading. When rough dozing, automatic blade control monitors blade load and adjusts blade elevation to minimize track slip. As work progresses, blade control adjusts accordingly to provide precision finish grade performance. Add-on machine control components mounted on blade have been replaced with factory-installed cab top GNSS antenna, inertial measurement unit, and stroke sensing hydraulic cylinders. Read More

Transportation Industry Products, Mounting & Attaching Products

Long-Length Wear-Resistant Rail targets worldwide demand.

October 28, 2013

Heat-treated, stress-free train track rails, available in lengths up to 108 m, help rail operators enhance performance and reduce expenses associated with worn rail replacement. During manufacture, rail moves through induction furnace that uses electromagnetic field to heat steel to 950°C. Rail is rapidly cooled using compressed air. Super-hardened rail withstands high-wear conditions, such as heavy traffic, high axle loads, and tight curves. Read More

Mounting & Attaching Products

Loader Replacement Track creates minimal ground disruption.

October 24, 2011

Designed to fit compact track loaders, Turf-Friendly Replacement Track features flat, even profile that prevents tearing and cutting of lugs. Track minimizes risk of damage to irrigation systems and underground utility lines, making it suitable for landscaping as well as buildings and grounds applications. Using patented belting technology and non-marking rubber compound formula, track also provides maximum longevity on hard surfaces such as pavement and asphalt. Read More

Mounting & Attaching Products

Rubber Replacement Track fits compact and mini track loaders.

October 24, 2011

Featuring all-season, non-marking design, Rubber Replacement Track has multi-bar lug pitch system that provides smooth, soft ride. Double offset tread pattern minimizes vibration, extending life of undercarriage, and helping contain growth of cuts or cracks. Built using patented belting technology, track can carry full load of machine while running at maximum engine capacity. Read More

Mounting & Attaching Products, Fasteners & Hardware

Sliding Door Hardware offers smooth, quiet operation

April 9, 2010

Suited for bypass glass or wood doors in all types of furniture applications, Sliding Door System has stoppers installed inside track and employs ball bearing door carrier rollers for silent and smooth operation. Aluminum Sliding Door Track, offered in clear anodized finish in 6.5 and 10 ft lengths, can be used as upper/lower track. Glass Door Carrier can be used with up to 33 lb, 5/32-¼ in. thick doors, and Wood Door Carrier can be used with up to 33 lb, 5/8 in. thick doors. Read More

Plant Furnishings & Accessories, Mounting & Attaching Products, Fasteners & Hardware

Hardware Kits let users make their own rolling ladder.

March 4, 2008

Offered in 3 types, Hardware Kits feature quiet rollers and non-marring wheels. Kit contains 2 bottom rollers, 2 rolling top guides, 7 rung support rods for steps, fasteners, and instructions. Track kit includes 1 in. dia x 8 ft powder-coated black aluminum track, 2 end stops, support brackets and screws, and steel support dowels. Available in 8, 9, or 10 ft length, which user cuts to desired height, wood ladder kit offers choice of red oak, maple, or cherry wood ladders. Read More

Mounting & Attaching Products

Modular Track Systems convert wheeled machines to tracks.

July 15, 2004

Modular Track Systems feature rubberized idlers and bogies for cushioned ride, permanent lubrication, and auto-tensioning system to absorb impact. Positive drive system combined with 30 or 36 in. rubber track provides traction. Modules weigh 6,000 lb each and can be retrofitted to range of off-road machinery via installation kit. Applications include tractors, seismic vibrators, vibratory compactors, milling machines, agricultural equipment, and mining equipment. Read More

Material Handling & Storage, Mounting & Attaching Products, Fasteners & Hardware

Roller Track maximizes use of rack space.

February 4, 2004

Profile Series Roller Track includes Slide-Guide(TM) feature to ensure smooth carton flow. Full-length captive T-slots on each side provide secure, tool-free guide attachment. Extruded from solid aluminum with clear anodized finish, modular track is assembled and disassembled without tools and can be cut with carbide blade, band saw, or cold saw. It measures 35 mm x 40 mm and features 33 and 44 mm dia wheels. T-slot nut is provided for mounting accessories. Read More

Mounting & Attaching Products

Steel Tracks are designed for use with skid-steers.

October 1, 2003

Loegering Z-Track provides aggressive traction and side-hill stability. Hammer-forged steel traction cleats are wear-resistant, self-cleaning, and provide skid-steer control. Tracks attach via customized installation tool, and reinstallation takes typically less than 30 min. Rebuildable tracks are fully adjustable due to their 3-hole link. Products utilize threaded Dura Pins with index feature to lock pins in place. Read More

Mounting & Attaching Products

Track System suits variety of applications.

October 30, 2002

Zephyr Track System offers open modular design that enables clean up when sanitization is necessary. With quiet operation, rack system is designed for sliding doors weighing less than 500 lbs with panel sizes from 2 to 8 ft wide. Components are FDA approved for food industry applications. Read More

Material Handling & Storage, Mounting & Attaching Products, Construction Equipment & Supplies

Handling System consists of modular components.

May 2, 2002

HBK Modular System uses matched components that can be used individually or combined. KBK Track is available in steel or aluminum with inside running surface protected from dust and spray. Crab Frames are designed for rigid load handling. Slewing cranes with KSL pivot arms support load capacities of 220 lb and serve 360 deg working area. Pillar jib cranes have load capacities of 1100 lb. Load handling modules engage and hold load to be handled. Read More

Mounting & Attaching Products

Door Track handles 12/12 roof pitch.

April 8, 2002

XL 12/12 P Door Track system enables company's knockout doors to operate on walls with support structures and roof pitches. Above door track makes 45 deg roof pitch angle, enabling door panels to open past ductwork, conduit runs, horizontal beams and other building support structures. Angles also minimize track exposure to masts on passing forklifts, and make door suitable for docks with sloping roofs. Read More

  • 1