Igus, Inc.
East Providence, RI 02914 0349
Jul 12, 2005 Tie-wrap plates and cable tie wraps work together to fix position of cables at specific points along carrier, providing strain relief for Energy Chain® cable management systems. Plates can be bolted onto KMA bracket, fixed onto mounting bracket with snap-in connection, clipped on without bolts, or clipped onto the opening of the crossbars. Tie wraps, used to attach cable to plate, can provide breaking force of 830 N when 2 ties are used instead of 1.

Wiremold Co., The
West Hartford, CT 06110
Feb 23, 2005 Overhead Wireless Access Point Bracket attaches directly to wire-style cable trays and may also be hung from cable tray using threaded rod. If optimal access point location does not coincide with cable tray, bracket can be suspended from building structure with threaded rod. Support bars are punched to accommodate different rod sizes. Galvanized steel bracket includes mounting straps that allow wide variety of mounting configurations.

Wagner Companies, The
Bulter, WI 53007
Dec 30, 2004 Style B formed handrail brackets offer 1? in. horizontal and vertical clearance to meet 2004 ADAAG (Americans with Disabilities Act Accessibility Guidelines) Section Advisory 505.6 code requirements. Product ensures space between wall and handrail is 1? in. and that horizontal projections occur 1? in. below bottom of handrail gripping surface. Brackets come in steel (part No. 3319), satin stainless steel (No. 3320), and satin muntz (No. 3321).

Wagner Companies, The
Bulter, WI 53007
Dec 20, 2004 Style D formed handrail brackets offer 1? in. horizontal and vertical clearance to meet code requirements and recommendations of Americans with Disabilities Act Accessibility Guidelines. ADAAG Section Advisory 505.6 states that space between wall and handrail must be 1? in. and that horizontal projections should be 1? inches minimum below bottom of handrail gripping surface. Brackets meet both clearance requirements.

Pass & Seymour/Legrand
Syracuse, NY 13221
Nov 30, 2004 TradeMaster® Keystone Wall Plates and Decorator Frames accept any combination of UTP and multimedia jack modules. Modules are available with F connectors for video coax cable; Category 5e jacks for data, telephone, camera, and audio; binding posts for speaker wiring; RCA to F connectors for sub-woofer pre-out; and blank modules to fill unused jack module spaces. Wall plates and frames come in 1, 2, 3, 4, and 6 port variants in ivory, light almond, and white.

80/20, Inc.
Columbia City, IN 46725
Nov 24, 2004 Quick Clamp Stanchions are available in over 40 standard models, including single or double shaft bases, blank or pre-drilled mounting plates, and single or double mounting blocks in 1, 1.5, and 2 in. bore sizes. Adjustable without use of tools, devices allow user to precisely position camera equipment, scanning devices, light sources, photo sensors, computer monitors, and actuators.

QTRCO, Inc.
Tomball, TX 77375
Jul 12, 2004 Investment cast of CF8M stainless steel, bracket is available in NAMUR No. 1 and No. 3 geometries. Open design facilitates access to fasteners to simplify mounting.

Adaconn & Inserta Products, Inc.
Blue Bell, PA 19422
May 24, 2004 INSERTA™ Blanking Plates are flange plates used to provide greater flexibility in assembly of INSERTA™ Modular Valves and Connectors, 4-Bolt Flange type. Plates are constructed with dome that induces stresses in plate greater than that of anticipated fluid’s maximum opposing pressure stress. Dome is installed facing fluid side that is to become pressurized. Made of steel, plates range in size from 1/8–2 in.

Wanner Engineering, Inc.
Minneapolis, MN 55403
May 18, 2004 HBD Baseplates and Guards facilitate easy pump and motor installation for horizontal belt drives, while providing protection in harsh industrial environments. Constructed from heavy gauge epoxy powder-coated steel or 304 grade stainless steel, baseplates and guards are available for NEMA motor frame sizes 56–286. They come as complete, ready-to-assemble package, and include fully threaded mounting holes.

Tolco Corp.
Toledo, OH 43624
Mar 10, 2004 Designed to brace against sway and seismic disturbances, Figure 4L in-line longitudinal sway brace attachment employs one-piece design that permits swivel in only one direction. Break-off head bolt is used to verify proper installation torque. Made of carbon steel, attachment comes with plain, electro-galvanized, or HDG finishes and is rated for 2,015 lb horizontal design load. It is available in sizes from 2½â€“8 in. IPS and is UL and cUL listed.

NIBCO, Inc.
Elkhart, IN 46516 4714
Mar 08, 2004 In-line, longitudinal, Figure 4L braces against sway and seismic disturbances. Break-off head bolt verifies proper installation torque, and one-piece design allows swivel in only one direction. Carbon steel attachment has plain finish, with electro-galvanized or HDG finishes available. It features 2,015 lb horizontal design load and comes in sizes from 2½ through 8 in. IPS. Unit is UL and cUL listed.

Keystone Electronics Corp.
Astoria, NY 11105
Nov 04, 2003 Universal Computer Brackets, available with variety of holes and cutouts to fit any PC peripherals, are made of .032 in. steel with high-luster nickel finish. Standard formats conform to most common configurations, while custom brackets are fabricated to exact requirements.

Textron Fastening Systems
Rockford, IL 61104
Sep 16, 2003 Cherry® Rivetless Nut Plate features retainer that does not require flaring to meet NASM25027 torque-out and push-out requirements. Uniform expansion of sleeve during installation enhances fatigue life of parent material. Nut plate applies in less than 2 sec in aluminum sheets as thin as 0.062 in. Operator inserts mandrel into predrilled hole and actuates tool. As fastener sleeve is pulled into hole, mandrel expands sleeve, completing installation.

Wanner Engineering, Inc.
Minneapolis, MN 55403
May 12, 2003 Baseplates and Guards facilitate pump and motor installation, while providing protection in harsh applications. Available for size 56–326 NEMA motor frames, units are powder coated steel or 303 grade stainless steel and come in vertical or horizontal configurations. They are ready to assemble, and include bolts, guards and shims, as well as fully threaded mounting holes.

Electro-Sensors, Inc.
Minnetonka, MN 55343 9108
Apr 25, 2003 Model EZ-SCP Easy Mount Bracket Assembly facilitates fast mounting of SCP Series speed switches, in new and retrofit installations including explosion-proof and waterproof applications. It is coupled directly to shaft, yet hangs freely and moves with shaft to compensate for performance variables caused by excessive movement or vibration. Bracket includes 2 sealed bearings, stainless steel shaft, painted aluminum bracket, 255-EZ Pulser Disc, and necessary hardware.

Seco-Larm
Irvine, CA 92606-5012
Apr 16, 2003 Model SD-7204SC-PE1 Push-To-Exit plate, for access control, is single-gang, stainless-steel plate with vandal-resistant, 3/4 in. dia, stainless-steel pushbutton which actuates NO/NC contact, rated 5 A @ 250 Vac. Features include waterproof construction with EXIT and SALIDA silk-screened on plate. Model SD-7104SC-PE1 is slimline configuration.

Seco-Larm
Irvine, CA 92606-5012
Feb 25, 2003 Model SD-7202GC-PE consists of single-gang, stainless-steel plate with 2 in., square, green, illuminated pushbutton. Additional offerings include NO/NC contacts rated 10 A @ 125–250 Vac, 5 color-coded wires with spade lugs, and replacement bulb and resistor. Model SD-7103GC-PE combines slimline, stainless steel plate with 1 x 11/16 in., green, illuminated pushbutton. Each model offers 2 interchangeable message plates: PUSH-TO-EXIT and PRESIONE PARA SALIR.

Braun, J.G.
Morton Grove, IL 60053
Jan 31, 2003 GlassWedgeâ„¢ permits dry installation of ½ in. tempered glass in shoe moulding. It consists of plastic isolator channel, aluminum wedge, and pre-drilled aluminum shoe moulding. Isolators are slipped over bottom of tempered glass and spaced 24 in. on center. Following confirmation of alignment, wedges are hammered into place using GlassWedgeâ„¢ chisel. System self-centers, self-plumbs and glass panels are set solidly in place in minutes.

Bilco Company, The
New Haven, CT 06505
Aug 12, 2002 Spring balanced LadderUP® Safety Post extension device enables service personnel to enter or exit roof hatch, vault, or manhole in upright and balanced position. It features tubular construction and permanently mounts on top two ladder rungs. Unit telescopes up and down, locking in upright position. Release lever allows LadderUP to be lowered to its retracted position. Black enamel steel, hot dip galvanized steel, stainless steel, and aluminum models are available.

Patterson Avenue Tool Co.
Long Grove, IL 60047
Apr 10, 2002 T-JAK(R) support plate is suitable for installing cabinets, drywall ceilings, crown molding, and ridge rafters. Once in place, it can be locked by straightening adjustment knob, then tightening it. Support can adjust from 53 to 84 in. and support loads up to 400 lb. Assortment of extensions increase span up to 10 ft. Also available is Mini-Brute(R), which has a range of 15 to 24 in, to install upper wall cabinets when base units are already in place.