Micro Plastics, Inc.
Flippin, AR 72634
Mar 07, 2007 Molded in black or natural nylon 6/6, Combo Cradle Mount offers chemical resistance and optimal wear properties. Large base assures stable mounting surface and can be secured with screw or rivet. Part can be used with standard or hook-and-loop wire ties to route bundles of wires, cables, or tubing.

Carr Lane Roemheld Mfg. Co.
Ellisville, MO 63021
Feb 13, 2007 Chuck Jaw Master Plates are made in 3 sections that mount on chuck, and accept variety of machinable jaw segments. They are available for chucks with 10-60 in. dia, in standard height and extra-high versions. Made of aluminum alloy, mounting pattern is machined according to chuck specifications based on make and size.

SKF Linear Motion & Precision Technologies
Olney, IL 62450
Feb 13, 2007 Controlled with desk, hand, or foot switches, SKF® TELESMART TMA/TMD series promote safe height adjustment for desks, tables, chairs, and industrial workstations. Type TMA pillars have 640 mm retracted length and 500 mm stroke, delivering push forces to 1,000 N at speeds to 55 mm/sec. With 550 mm retracted length and 700 mm stroke, Type TMD pillars achieve push forces to 800 N at speeds to 60 mm/sec. Dimensions of both types contribute to optimized workplace ergonomics.

Sunnex, Inc.
Natick, MA 01760-1314
Feb 01, 2007 Designed for machines with loads from 100-12,000 lb that do not need to be fastened to floor, M-Series anti-vibration mounts resist fatigue from fast working cycle times and strong lateral forces. Design minimizes noise and reinforced, built-in leveling bolt support cup distributes machine loads to support points within mount. Vertical/horizontal forces are dampened out by chemically resistant nitrile pad.

Anver Corp. - Anver.Com
Hudson, MA 01749
Jan 29, 2007 Threaded on inside and outside, VX Series Load Leveling Extensions accommodate variety of fittings and feature oversize nuts and lock washers for secure operation in high-speed automation equipment. Units allow bellows-style vacuum cups to grip at various heights from same installation plate or manifold. Made from nickel-plated brass, extensions come in G 1/8 in. OD thread x 5 mm ID thread x 1, 1.5, and 2 in. long and G ¼ in. OD x G 1/8 in. ID x 1, 2, and 3 in. L.

Ondrives Ltd.
Chesterfield, Derbyshire S41 9RN  United Kingdom
Jan 23, 2007 While absorbing shock and vibration within machine, Isomounts also serve to protect machines from external disturbances. Height adjustment is achieved via leveling screw passing through machine foot into tapped bush in steel cover. Also available, Jackmounts offer vibration damping for machines accommodating leveling screw support. These products provide optimal floor contact and friction grip for machines needing stable, damped support.

Stafford Manufacturing Corp.
Woburn, MA 01888
Jan 16, 2007 Designed to mount onto any pipe, tube, or shaft, 2-piece clamp-style Mounting Collars feature smooth bore with countersunk tapped hole, which accepts screw that exits through flat surface. Made from steel and stainless steel, units are adjustable and come in sizes from 3/8-1½ in. ID. Collars can be used for attaching lights, meters, sensors, and accessories onto machines, instruments, racks and conveyors, trucks, RVs, and other vehicles.

Tiffen Co. LLC, The
Hauppauge, NY 11788
Jan 15, 2007 Accommodating various television cameras as well as 16 and 35 mm film cameras weighing 4-15 lb, STEADICAM® F-24SE(TM) is provided with every accessory required for normal operation. It features 7 in. LCD monitor with variable framelines, is wired for 12/24 V (switchable) operation, and uses dual Steadicam Power Cube 6000mah IDX batteries. Along with battery power source paralleling capability, features include Iso-Elastic(TM) Articulated Stabilizer Arm and aluminum post with Low Mass Gimbal.

Pass & Seymour/Legrand
Syracuse, NY 13221
Dec 15, 2006 Designed for mounting class 2 low-voltage devices, Low Voltage Brackets incorporate reinforcement ribs to minimize racking, cable tie ports to hold cable during trim-out, and countersink holes to prevent wallboard bow. Metallic swing brackets are available for old work applications, while nail-on, face-mount, and screw-on styles are offered for new work applications. All feature installation and height alignment features for mounting devices next to adjacent switches.

Sunnex, Inc.
Natick, MA 01760-1314
Dec 04, 2006 FDA approved H3A Series machinery mounts are made of ASNI 304 SS for chemical resistance, and feature rubber vulcanized to mount housing to provide hygienic seal. Operating from -20 to 100°C, leveling mounts have full range of motion starting at 10° pivot, providing secure footing and vibration control. Units are available with or without thread casings, with 1 or 2 anchoring holes, and also with 316 SS for corrosive environments.

Sunnex, Inc.
Natick, MA 01760-1314
Nov 29, 2006 Made of ANSI 304 stainless steel, H3A-Series hygienic leveling mounts feature 304 SS for chemical resistance and are rated for temperatures from -20 to +100°C. Products, suited for food and dairy processing equipment and manufacturing applications, are available with or without thread casings, which eliminate contamination and offer lock-nut functionality. Full range of motion, starting at 10° pivot, provides secure footing and vibration control.

Asymmetric Fasteners Inc.
Hackettstown, NJ 07840
Nov 27, 2006 Providing alternative to traditional mounting of ball bearings, Torksleeve B mounts variety of bearings, including roller, needle, linear, and plain to metal or plastic walls, and provides self-locking and vibration-resistant performance. Tightening nuts causes slotted sleeve to contract, gripping bearing and clamping it to frame.

Advanced Specialty Gas Equipment
Middlesex, NJ 08846
Nov 17, 2006 Designed to mount cylinder regulators onto panel or wall, Quick Mount eliminates need to install 2-stage regulators directly on compressed gas cylinders. Device features teardrop holes for mounting and dismounting. Double braided stainless steel flexible hose and check valve in CGA nipple maintain gas purity by reducing air and moisture infiltration.

Hoffman Products
Oak Park, MI 48237
Nov 15, 2006 UL-recognized product line includes standard natural ties; black, weather-resistant ties, mounts, clips, and clamps; as well as stainless steel ties. All ties are available in various lengths and tensile strengths. Capable of withstanding temperatures from -40 to +185°F, standard and weather-resistant ties are made of UL94V2, 6/6 nylon. Stainless Steel ties, made of 304 or 316 stainless steel, have -80 to +538°C range.

Richco, Inc.
Morton Grove, IL 60680
Nov 14, 2006 Featuring one-piece design that fits all industry-standard dc fans from 10-51 mm, FMM series provides shock and vibration protection and facilitates assembly when mounting in restrictive spaces. End can be cut off after mounting for further space conservation.

EXAIR Corporation
Cincinnati, OH 45249-1621
Oct 27, 2006 Providing positioning for air knives used to blowoff, dry, and cool, Universal Air Knife Mounting System features stainless steel construction that is suited for variety of industrial applications. Adjusting knobs lock pivoting joints in place and arm of mounting system provides maximum reach extension of 30 in. Assembly can be securely mounted to machine frame using 17/32 in. dia hole or by threading it directly into ½ in.-13 tapped hole.

Carr Lane Manufacturing Co.
St. Louis, MO 63119
Oct 18, 2006 Zero Point Mounting Kits contain all required components to create quick pallet change system for CNC machinery. Speedy Module plates, mounted onto machine table or tooling block, clamp onto nipples attached to bottom of existing fixture plates. Attaching nipples to all fixtures lets users change pallets in seconds. Module plates can also be mounted to inspection machines, making it possible to transfer parts from machining to inspection while maintaining same data points.

Balluff, Inc.
Florence, KY 41042-0937
Oct 16, 2006 Available in plastic or metal, BMS Sensor Mounting System lets users position sensor at any angle on production line. Dimensionally stable system offers 3 axes of movement and uses knurled pins to hold position during sensor replacement. Able to accommodate any manufacturer-specific mounting profile, holder works with standard mounting extrusions while locking firmly and symmetrically in rail slot. Metal-body fine adjustment unit is available for laser sensors.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Oct 12, 2006 Suited for mobile applications, light-duty A10Z22 series consists of 10 mounts with static load capacities from 1.55-132.30 lbs and natural frequencies from 7-10 Hz (vertical) and 4.5-6 Hz (transverse). Heavy-duty A10Z28 series, designed for machine tools, motors, generator sets, and pumps operating above 2,500 rpm, includes 6 mounts with static load capacities from 10-1,000 lb and natural frequencies from 13-17 Hz. Both series have stainless steel springs and knitted mesh pads.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Oct 12, 2006 Designed for use with rotating and/or reciprocating devices, A10Y15 Series stainless steel leaf spring type vibration mounts employ 2 or more stainless steel U-formed leaves that are situated at each end to form elliptical shape when joined together in center portion with face plates. Spaces between U-formed leaves are filled with polymer compound post-cured to permanent condition. Nonmetallic collars backed by stainless steel washers are provided for load attachment.