Other

Mounting & Attaching Products, Services

Refurbishing Pump & Motor Bases

July 15, 2016

A Power Plant customer had several pump motor bases that had extreme corrosion due to the aggressive salt water environment they were in. Many of their pumps & motors were older units, and new bases were not available either because the factory no longer made parts for the pumps, or the ones that did would require a lot of machining and changes to get them to fit correctly. Additionally, they... Read More

Mounting & Attaching Products

Adjustable Friction Hinges have virtually no radial play.

June 28, 2016

Offered with black or silver powder-coated, textured finish, GN 437 Zinc Die-Cast Adjustable Friction Hinges utilize plastic interlocking friction cones that are temperature resistant to 176°F to achieve friction torque. Set screw allows mobility of hinge to be changed and generates constant braking torque that is adjustable across rotating range. Rotation of doors and flaps is inhibited, preventing inadvertent movement. Hinges have virtually no radial play and no play at all in axial direction. Read More

Mounting & Attaching Products

Stainless Steel Hinges resist tampering.

June 14, 2016

Available in metric sizes, GN 129.5 Stainless Steel Hinges are used for doors that are flush with frame on outside. Once assembled, RoHS-compliant hinges cannot be unhinged. Body, pin, and washer are available either in stainless steel, European Standard No. 1.4305 (American Standard Series 303) or A4 stainless steel, European standard 1.4408 (American Standard Series 316). Hex nut and serrated washer are of stainless steel, European Standard No. 1.4301 (American Standard Series 304). Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products, Packaging Equipment

Connectors and Plugs serve commercial and municipal applications.

June 3, 2016

Used with Viega PEX Press system, PEX Press test plugs (3/8–1 in., 1 ¼ in., and 1 ½ in.) have Smart Connect® feature. Also made of Radel R, 45° polymer PEX press elbows come in 1 ½ x 1 ½ in. and 2 x 2 in. sizes. PEX Press bronze, 90° flare elbows (¾ and 1 in.) and PEX Press reducing tees (1 ½ x 1 ½ x ¾ in., 1 ½ x 1 ¼ x 1 in., and 1 ½ x 1 ¼ x 1 ¼ in.) are constructed from Zero Lead™ bronze. Usable with ViegaPEX™ tubing, PEX pipe supports come in 10 ft lengths in 1, 1 ¼, 1 ½, and 2 in. dia. Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Remote Controlled Pan Tilt Base supports up to 100 lb.

May 31, 2016

Constructed of die-cast aluminum and powder coated for corrosion resistance, Model PTB-1 enables remote control of lights, cameras, and other equipment when mounted to 8 x 10 in. mounting plate. Remotes allow operators to rotate mounted equipment from 0–355°, while providing tilting range of -60 to +30°. Battery-operated wireless remote supports wireless key fob, while wired remote extends 15 ft from base of light, with extra 10 ft of cord running from remote to power source. Read More

Communication Systems & Equipment, Electronic Components & Devices, Mounting & Attaching Products

Waveguide Twists operate from 18-110 GHz across 7 bands.

May 13, 2016

Available in sizes from WR-42 (18 GHz) to WR-10 (110 GHz) and suitable for waveguide systems requiring gradual turn in polarization and waveform, precision 45° and 90° waveguide twists prevent unwanted signal transmission distortion. Gold-plated brass construction offers electrical performance with VSWR as low as 1.02:1 and insertion loss as low as 0.2 dB. Square and circular UG-style flange types are available, and mechanical length ranges from 1–2.7 in.
Read More

Mounting & Attaching Products

Torch Base provides smooth adjustments, automatic locking.

May 10, 2016

While compatible with Bravo and Alpha torches, universal ball-bearing scroll base fits other torch models and brands. Functionality provides torch operators with smooth adjustments and automatic locking mechanism. Design features flat, level surface with rubber feet for safe and secure mounting and clamping to work stations. Read More

Mounting & Attaching Products, Printing & Duplicating Equipment, Retail & Sales Equipment

Point-of-Purchase Products attract customer attention.

April 12, 2016

Designed for long-term usage in slatwall retail displays, Metal Slatwall Hooks come in slimline design with 3/16 in. diameter wire or standard version with ¼ in. diameter wire, both varying in length up to 12 in. Metal Pegboard Hooks, offered in 4, 6, 8, 10, and 12 in. sizes, are 3/16 in. thick for heavy-duty usage with ball end for customer safety. Point-of-Purchase printing solution helps retailers effectively capture customer attention, convey key messages, and drive sales. Read More

Fluid & Gas Flow Equipment, Mining, Oil Drilling & Refining, Mounting & Attaching Products

DSTI to Attend 2016 Subsea Tieback Exhibition in San Antonio

March 18, 2016

MINNEAPOLIS, Minn. - Dynamic Sealing Technologies (DSTI) will be showcasing its high pressure subsea and topside fluid swivel technology at Subsea Tieback Forum and Exhibition (SSTB) March 22 - 24, 2016 in San Antonio, Texas. "As the industry continues to face economic challenges, now, more important than ever, is the time for oil and gas leaders to focus on standardization and improving... Read More

Materials & Material Processing, Mounting & Attaching Products

Double Rail Extrusions create rugged subracks.

March 2, 2016

Tested in railway applications for resistance to shock/vibration and ability to handle extreme loads, double rail extrusions with dual mounting provide modular framework for electronics enclosures. Mounting holes for second screw promote stability and strength for modular enclosure. Offered in front and rear versions and with various interfaces, extruded aluminum rails also include sets of 1HP pitch patterns of 2.5M tapped holes for snapping in card guides and mounting backplanes. Read More

Mounting & Attaching Products

Forged Rigging Hooks are rated for capacities up to 60 tons.

February 1, 2016

Supporting load ratings from 31 ½–60 tons, high-capacity rigging hooks are constructed with quenched and tempered material that maximizes strength while minimizing weight and size. Forged latch tab is pre-drilled for facilitated installation, and hooks' 5:1 design factor, same design factor as wire rope, eliminates need to downgrade. To help ensure safe and proper use, visibility of load rating marking facilitates identification. Areas of use include heavy-duty lifting applications. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Multipole Connector Panel Supports increase versatility, access.

January 19, 2016

COB (connector on board) series does not require metallic enclosures to use multipole connectors inside electric panels; protection is provided by electric panel itself. While interchangeability of connector inserts increases versatility, rear access to inserts via turnover device facilitates wiring inspection and tests with coupled connectors. Mobile parts are prearranged for clamping of bundles of conductors of multipolar cables to prevent contact with the connector contacts.
Read More

Labels, Tags, Signage & Equipment, Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products, Portable Tools, Services

Garvey to Begin Flat Rate Shipping to Canada for Internet Orders

December 14, 2015

Cincinnati, Ohio - Garvey Products, Inc. is a leader in supplying handheld price marking guns, pressure sensitive labels, box cutters, safety cutters, shopping carts/baskets, and apparel tagging equipment to industrial, retail, medical businesses, and distributors. Garvey Products, Inc. is proud to announce that we are now shipping to Canada for a flat rate from our website.  We will ship... Read More

Material Handling & Storage, Mounting & Attaching Products, Packaging Equipment

Easy Spool Packaging

December 4, 2015

Spool components add speed and convenience to product packaging Greenville, Wis.  – Badger Plug has all components needed for assembling spools on site fast and easy – or as pre-assembled spools. End flanges are available in corrugate, chipboard, MDF or hardboard. Plastic or metal self-locking spool plugs, available for light to heavy-duty applications, secure end flanges to the core.... Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products

Swivel Fitting enables precision blow off.

November 12, 2015

Offering 50° total angle of adjustment, Model 9204 1 MNPT x 1 FNPT Swivel enables Super Air Nozzles to be precisely adjusted to best position for maximum effectiveness. Unit is made of 303 stainless steel and can be used with 316 stainless steel and zinc/aluminum alloy nozzles. Swivel can help make nozzles more effective when replacing existing wasteful nozzles or open tubes and are suitable for blowoff, cooling, and drying applications. Read More

Mounting & Attaching Products

Elevating Pedestal increases camera shooting versatility.

September 17, 2015

Designed to maximize space, Televator® Elevating Pedestal EP6 Mini comes in 2 sizes suited for such smaller robotic camera applications as broadcast news flash studios, corporate production, and distance learning lecture halls. Among other features are variable speed with 32-bit encoding for smooth acceleration and deceleration; accurate, absolute positional servo; and auxiliary control bus interface. Solution pairs with camera track systems for versatile deployment and camera shooting. Read More

Mounting & Attaching Products, Optics & Photonics, Robotics, Vision Systems

Telemetrics Displays Innovative Broadcast Solutions at IBC

September 16, 2015

High-Performance, Durable and Flexible Products, Designed to Meet Demanding Broadcast Requirements Rai, Amsterdam  - At this year’s IBC, Telemetrics is demonstrating new and proven products that showcase a commitment to innovation and can drastically improve the quality and performance of new and existing live production facilities. With a range of products including elevating pedestals,... Read More

Communication Systems & Equipment, Display & Presentation Equipment, Mounting & Attaching Products, Optics & Photonics, Vision Systems

Shotoku Broadcast Systems Demonstrates the Next Generation in Absolute VR / AR Tracking at IBC 2015

September 9, 2015

Camera Support Manufacturer will also Present TP500 cto European Market and Highlight SmartTrack System Amsterdam, The Netherlands  - Shotoku Broadcast Systems, the well-established leader in manual and robotic camera support, and virtual reality tracking, is demonstrating Free-d2 at IBC 2015 (Stand 11.F40) -  next generation VR tracking solution,  alongside the new TP500 compact and... Read More

Mounting & Attaching Products, Waste Handling Equipment

DSTI Plays Critical Role in Oil Spill Containment Technology

August 26, 2015

MINNEAPOLIS, Minn. — Dynamic Sealing Technologies, Inc. (DSTI) has secured a multi-year contract with Oil Spill Response Limited (OSRL) to provide equipment and storage for a key part of a containment toolkit used in emergency responses during underwater oil well spills. The containment toolkit provides operators with the subsea intervention equipment they need to help seal off a leak and... Read More

Mounting & Attaching Products

Thin Cable Suspension System supports LED fixtures.

August 24, 2015

Utilizing vast range of gripper and ultra-thin cable combinations, Wisp™ Cable Suspension System fits almost any need in lighting, display, and art markets. System utilizes 7 x 7 stainless steel and galvanized aircraft cable with factory-fitted terminal, allowing cable to be attached to structure via cable coupler. Read More