Ivy Associates Limited
Shanghai   China
Aug 12, 2008 Designed to address issue of damaging parts during transportation operations, Ivy Shock Pillow© helps reduce impact forces associated with railcar coupling actions. Logistics damage prevention product absorbs transit induced forces, which are typically generated by cargo impacting the end walls of rail boxcars, trailers, or sea containers, before they can be transferred into cargo. It impedes transfer of kinetic energy from impact shocks.

Misumi USA
Schaumburg, IL 60173
Jul 22, 2008 Suited for building of machinery and equipment, Urethane, Rubber, and Sponge Components come in round and metal plate-mounted versions as well as configurable block versions. Urethane and rubber bumpers feature round tips, and come in choice of solid or through-hole designs. With diameters, lengths, and through-hole sizes configurable in 1 mm increments, hundreds of sizes and shapes are available. Urethane blocks mounted on metal plates are offered in flat, V-shaped, and corrugated designs.

Capital Safety
Red Wing, MN 55066-5005
Jun 18, 2008 Designed to meet requirements of AS/NZS 1891:2007 standard, Delta(TM) Resist Harness and EZ Stop® Resist Shock Absorbing Lanyard feature extruded polyurethane coating that protects against grease, oil, paint, dirt, and grime. Webbing deflects debris, cleans up in seconds, and extends service life. Utilizing RFID, i-Safe(TM) intelligent safety system is built into every harness and lanyard to track inspections, control inventory, and manage information.

Miller Fall Protection
Franklin, PA 16323
May 29, 2008 Designed to meet OSHA, ANSI Z359-2007, and CSA Standards, Miller Revolution(TM) Harnesses and Miller® Shock-Absorbing Lanyards feature vinyl coating on webbing to protect against liquids that could compromise performance. Harnesses include rotary PivotLink(TM) connection, tongue buckle leg straps, 2 pull-free lanyard rings, and clip-on web finials. Rated to 310 lb, lanyards feature SofStop® shock absorber pack with woven inner core that expands up to 42 in. to safely reduce fall arrest forces.

Heyco Products
Toms River, NJ 08753
May 29, 2008 Available in sizes to handle .118-.500 in. mounting hole diameters, Rubber Push-In Bumpers can be used on panel thicknesses from .098-.188 in. and come in range of different shapes to suit varying application requirements. Products are constructed of black SBR and fit snugly into mounting holes so that air or water cannot pass through. Operating temperature range is -40 to +221°F, and additional applications include use as feet.

Tapeswitch Corp.
Farmingdale, NY 11735
May 14, 2008 Suited for use on AGVs, mobile platforms, traveling conveyors, and other moving equipment or machinery, VBL-250 Safety Bumpers activate from average of 4 lb with full collapse achieved as low as 34 N. Capable of up to 8 in. of collapse or crush distance, units are 2.5 in. wide and available lenghts from 4 in. to 16 ft. Polyurethane jacketed switch compartment protects switch from dirt and moisture. Winged version VBL-250-W provides full wrap around corner protection for vehicle.

Rogers Corporation
Rogers, CT 06263 0188
May 12, 2008 Based on open-cell urethane foam technology, E/bak(TM) cushion mounting materials are used to build thickness on cylinder as well as provide cushioning and absorb vibration in corrugated printing process. Allowing for printing on rough surfaces, they maintain high solid ink density for consistent print results over entire press run. Dark green foam with skin surface is available in 0.040, 0.060, and 0.080 in. thicknesses and is 60 in. wide.

Boston Retail Products
Medford, MA 02155
Apr 29, 2008 Available in standard and custom colors, ecoFlex® TFC1000 has 1 in. rectangular shape, while TFC1750 has 1.75 in. half-round shape. Bumper systems are manufactured from recycled flexible vinyl and are 100% recyclable. Performance matches original Boston Bumpers®, but inner core contains recycled materials, helping to minimize environmental waste. The ecoFlex® are also available in 2 and 3 in. silhouettes in variety of standard and interchangable profiles, bases, ends, and corners.

Capital Safety
Red Wing, MN 55066-5005
Apr 07, 2008 EZ Stop® II is available as single- or twin-leg tie-back model with standard snap hook, aluminum rebar hook, flat steel rebar hook, or carabiner ends. Its ANSI Z359.1-2007 rebar hooks feature 3,600-pound gates, allowing them to be used in tie-back applications with floating D-ring. Controlled tearing action, when subjected to fall arrest forces, limits arresting forces to no more than 900 lb. Abrasion-resistant tubular webbing covers additional layer of polyester web for durability.

Parker Hannifin Corp., Hydraulic Accumulator Div.
Rockford, IL 61115
Mar 31, 2008 With tunable piston, hydraulic Spring/Shock Absorber, manufacturers can incorporate fully active suspension into heavy-duty mobile equipment. Unit integrates cylinder and accumulator technologies into piston design utilizing leak-free, 5,000-psi nitrogen chamber. Electronic sensors on suspension, in combination with Auxiliary Power Unit, measure impact of ground terrain. Algorithms in control unit signal valves to open and release precise amount of fluid required to combat ground force.

Hendrickson
Itasca, IL 60143-1285
Jan 29, 2008 Designed for Mack CH, CHN, and CHU trucks, Hendrickson Aero Bright® 3-Piece Bumper combines steel chromed center sections with HAB end caps for durability. Matching luster of chrome center section, lightweight end caps use thermoplastic polyolefin plastic and weatherable paint films with thick-sheet thermoforming technology.

Enertrols, Inc.
Westland, MI 48185
Aug 22, 2007 Featuring steel body, nitrile accumulator, and hardened stainless steel piston rod, SA ¼ x ½ Shock Absorber handles range of applications with energy per cycle rating of 200 lb-in. Unit can be adjusted by turning adjustment screw at rear. Miniature shock absorber is suited for business machines, packaging equipment, pick and place operations, processing machinery, and transfer equipment.

Hendrickson International
Woodridge, IL 60517-4904
Jun 22, 2007 Designed for International 4000 and 8000 Series trucks, AERO CLAD(TM) Bumper Model AM7450SSC features lightweight design with mirrored finish that can be installed to factory mounting points. Stainless steel clad aluminum unit resists corrosion, cracking, pitting, peeling, and fading. Minor abrasions can be buffed out.

Richco, Inc.
Morton Grove, IL 60680
May 08, 2007 Made of abrasion-resistant rubber, TB Series offers anti-skid and scratch-resistant properties to help cushion and provide vibration control. Units feature typical compression of 0.03 in. for 10 lb max load. Available in both metric and imperial threads, rigid brass stud facilitates installation and provides strong hold. Parts are corrosion-resistant and RoHS compliant.

ACE Controls, Inc.
Farmington, MI 48335
Mar 13, 2007 Featuring fully threaded steel body, MC 5M Industrial Shock Absorber offers 3 effective weight ranges from .22-11.1 lb with energy per cycle rating of 6 lb-in. Unit can be mounted in confined spaces and is suited for office and medical equipment, instrumentation, circuit board production, small slides, packaging equipment, and small robotics.

Lobster Tools/S-B Industries, Inc.
Fenton, MO 63026-2914
Mar 06, 2007 Made of abrasion-resistant natural and reclaimed rubber compounds, Dock Bumpers are available in variety of 2-Hole Truck Trailer and Specialty size options. They withstand temperatures from -60 to 180°F and are suited for trucks, trailers, and forklifts as well as to help protect curbs, rollers, walls, corners, and any place metal to surface contact is harsh and continuous.

Konstant Products, Inc.
Skokie, IL 60077
Jan 30, 2007 Designed to attach to column without additional fasteners, Protect-it(TM) devices minimize damage caused to pallet racking in event of forklift impact. They consist of outer wall that is integrally molded to series of curved spring-like energy absorbers at front and sides. Spring clips enable devices to securely grip column and automatically adjust width to suit variety of sizes. Available in recognized safety colors, protectors are effective down to -40°C/F.

Nocord
Richmond, VA 23224
Jan 10, 2007 Utilizing centrifugal fan, SummerSeat pulls in fresh air to cool back and bottom of driver or passenger. Foam cushioning, microfiber mesh, and Eva(TM) Cooling Plastic promotes cool air flow, while adjustable cooling control lets user set desired level of comfort. Product draws minimal power from vehicle's battery and has energy saving automatic shut-off timer that deactivates seat every hour. Optional ac adapter is available for office use.

Richco, Inc.
Morton Grove, IL 60680
Nov 14, 2006 Constructed of 35 Shore A, shock-absorbing silicone rubber, BAB series is intended for pull-through manual assembly. Mounting tab on bumper is designed to break away after assembly to conserve space. Bumpers maintain aesthetic appearance on outside of chassis and offer temperature resistance to 482°F. Products exhibit anti-skid and anti-marking properties.

Richco, Inc.
Morton Grove, IL 60680
Oct 13, 2006 Without requiring mounting hardware or tools, BPM series is installed by pulling foot through 6.0-6.35 mm panel hole in 1.5 mm panel thickness. Pull mount ends can be cut off after application to save space, and bumper's rubber material provides shock and vibration protection as well as skid resistance. RoHS-compliant products, part numbers BPM-1 and -2, are rated for temperatures from -67 to +482°F.