RNR Plastics, Inc.
Raynham, MA 02767
Dec 14, 2007 METALgrommets Kit comes with ¼ and 3/8 in. ID stainless steel die sets and 500 pieces of self-piercing metal grommets and washers and includes 200 brass, 100 nickel, 100 black oxide, and 100 white. It includes ClipShop(TM) Grommet Hand Press that eliminates need for hammers and tools, and features contoured handle, cushioned hand grip for comfort, and large throat depth for flexible grommet placement.

Pepperl+Fuchs
Twinsburg, OH 44087
Nov 26, 2007 Combining intrinsically safe energy limitation and galvanic isolation, FieldConnex® Ethernet Isolators enable high-speed data devices located in hazardous locations to be connected directly to standard Ethernet line. Products also allow for back-to-back, pass through applications without requiring any separate hardware. PCB-mounted version allows OEM to seamlessly integrate intrinsically safe Ethernet into their own equipment.

Optek Technology, Inc.
Carrollton, TX 75006-6905
Nov 07, 2007 Using plastic optical fiber, OPI1270 Series provides power electronics engineers with means to isolate high voltage I/O circuits over distances from 0.71-3.15 in. These RoHS-compliant axial fiber optic isolators are constructed using visible red (645 nm) LED emitter and phototransistor detector in separate opaque molded plastic modules, linked by shrouded and flexible optical cable that shields optical signal from dust and other contaminations.

Heyco Products
Toms River, NJ 08753
Oct 31, 2007 Available in various cable and mounting hole sizes from .079 to over 1 in. dia, Snap-In Cordgrips deliver cord and cable strain relief in limited-clearance applications inside electrical cabinets and product housings. Fingers on end of cordgrip securely lock into cabinet or product housing without tools, and polyamide 6/6 nylon construction is resistant to chemicals. Areas of use include any applications that utilize flexible power cord in non-liquidtight environment.

Richco, Inc.
Morton Grove, IL 60680
Oct 19, 2007 Molded in Nylon 6/6, Series SRSG snaps into place, and when self-threading screw is installed, grommets expand and securely lock screw and assembled parts in place. Grommets also insulate areas of assembly from electrical and thermal transfer and spread load over wide area. Units are RoHS compliant and come in natural color.

RNR Plastics, Inc.
Raynham, MA 02767
Sep 06, 2007 Compatible with common grommet presses, Grommets eliminate need for separate hole punching. Available in brass, antique brass, nickel, and black oxide, they are offered in 1/8 to 1½ in. ID sizes and feature heavy gauge construction and sharp edge. Grommets are suited for various applications including manufacturing awnings, banners, signs, tarpaulins, tents, boat covers, belts, clothing, accessories, draperies, and furniture.

Enertrols, Inc.
Westland, MI 48185
Aug 22, 2007 Featuring steel body, nitrile accumulator, and hardened stainless steel piston rod, SA ¼ x ½ Shock Absorber handles range of applications with energy per cycle rating of 200 lb-in. Unit can be adjusted by turning adjustment screw at rear. Miniature shock absorber is suited for business machines, packaging equipment, pick and place operations, processing machinery, and transfer equipment.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 31, 2007 Supporting any combination of 3.3 or 5 V supplies, ISO722x family digital isolators feature 1 nsec channel-to-channel skew, 3 nsec part-to-part skew, 1 nsec jitter, 1 nsec pulse width distortion, and 4 kV ESD protection. Integrating capacitive isolation technology, units provide immunity against data corruption due to 25 kV/µs voltage transients. Facilitating PCB layout, Model ISO7220 has 2 channels in same direction, while Model ISO7221 has 2 channels in opposite directions.

Heyco Products
Toms River, NJ 08753
Jul 27, 2007 Providing liquid-tight strain relief, Heyco-TITE Cord Grips connect flexible cables and cords from .065-1.350 in. dia. Smooth, rounded interior surfaces allow cords and cables to insert into housings without binding or scraping of insulation, while Acme threads prevent slipping of cords or liquid penetration. Molded from Type 6/6 polyamide nylon with Buna N sealing glands, grips are resistant to salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.

Pepperl+Fuchs
Twinsburg, OH 44087
Jun 25, 2007 HiC family of Intrinsic Safety Isolators provide single channel of isolated power and ultra-thin housing for reliable industrial signal transmission and system availability. Motherboard-mounted HiC modules feature SIL 2/3 rating and 0.8 W power dissipation that keeps cabinets cool. Units can be fastened onto 8 or 16 slot termination boards without need for tools or wiring, and can be expanded with HART communication board and fault indication board.

Hendrickson International
Woodridge, IL 60517-4904
Jun 22, 2007 Designed for International 4000 and 8000 Series trucks, AERO CLAD(TM) Bumper Model AM7450SSC features lightweight design with mirrored finish that can be installed to factory mounting points. Stainless steel clad aluminum unit resists corrosion, cracking, pitting, peeling, and fading. Minor abrasions can be buffed out.

Optek Technology, Inc.
Carrollton, TX 75006-6905
May 09, 2007 Comprised of IR emitting diode coupled to NPN silicon phototransistor or photodarlington, OPI7000 Series features reversed emitter and collector pin-out that enables direct pin-for-pin replacement of lower isolation voltage 4-pin dual in-line optocouplers mounted on existing PCBs. LED peak wavelength is 890 nm for the OPI7002/OPI7010 devices and 890 or 935 nm for OPI7320/OPI7340. Respectively listed CTR values are 20%, 100%, 200%, and 400%.

Richco, Inc.
Morton Grove, IL 60680
May 08, 2007 Made of abrasion-resistant rubber, TB Series offers anti-skid and scratch-resistant properties to help cushion and provide vibration control. Units feature typical compression of 0.03 in. for 10 lb max load. Available in both metric and imperial threads, rigid brass stud facilitates installation and provides strong hold. Parts are corrosion-resistant and RoHS compliant.

FCI
Etters, PA 17319
May 08, 2007 Strain relief is designed for Minitek(TM) 2.00 mm pitch Insulation Displacement Connector (IDC) cable receptacles. Assembled strain relief and IDC receptacle, including flat cable, measure 12.5 mm in height. Strain Relief offers additional retention force for cable attachment and protection of IDC contact terminations, making them suited for applications in harsh environments such as industrial control units.

Bridgeport Fittings, Inc.
Stratford, CT 06497
Mar 20, 2007 Models BXE-100/200/300 feature continuous, smooth, nonmetallic side walls that completely enclose devices, creating insulating barrier between them and their respective metal boxes. Extender does not interfere with wiring, so no trimming is required. Mounted completely flush with wall, products fit most metallic or nonmetallic electrical boxes and accommodate GFCIs. While BXE-100 and BXE-200 correct up to 1 in. setbacks, BXE-300 corrects up to 5/8 in. setbacks.

ACE Controls, Inc.
Farmington, MI 48335
Mar 13, 2007 Featuring fully threaded steel body, MC 5M Industrial Shock Absorber offers 3 effective weight ranges from .22-11.1 lb with energy per cycle rating of 6 lb-in. Unit can be mounted in confined spaces and is suited for office and medical equipment, instrumentation, circuit board production, small slides, packaging equipment, and small robotics.

Lobster Tools/S-B Industries, Inc.
Fenton, MO 63026-2914
Mar 06, 2007 Made of abrasion-resistant natural and reclaimed rubber compounds, Dock Bumpers are available in variety of 2-Hole Truck Trailer and Specialty size options. They withstand temperatures from -60 to 180°F and are suited for trucks, trailers, and forklifts as well as to help protect curbs, rollers, walls, corners, and any place metal to surface contact is harsh and continuous.

Heyco Products
Toms River, NJ 08753
Mar 02, 2007 Suited for applications where limited clearance exists inside electrical cabinets/housings, Snap-In Cord Grips can be configured for electrical power, HVAC, and systems-management installations. They allow cords and cables from .079 to more than 1 in. dia to insert through grips, without binding or scraping of insulation which facilitates safe, secure passage. Grips are constructed from polyamide 6/6 nylon, and feature smooth, rounded interior edges.

Plastic Design, Inc.
North Chelmsford, MA 01863
Feb 27, 2007 Able to be set up in any conditioned environment, custom-fabricated isolators are secure solutions that may be used for animal quarantine, housing and production of immunodeficient animals, and maintenance of foundation colonies of genetically-modified animals. Semi-rigid models include 3 ft (right- and left-handed) cube and 8 ft isolators, and 6 ft flexible film isolator is also available. All models are designed to be stacked 2 units high.

C & M Corporation
Wauregan, CT 06387 0348
Feb 22, 2007 Made of medical-grade silicone rubber, Wave Strain Relief combines smooth, cleanable surface of straight strain relief with flexibility of chambered-style strain relief. RoHS-compliant unit is applicable wherever cable is used that requires ease of cleaning. Configuration may also be produced in PVC, polyurethane, and thermoplastic elastomer formulations.