RF Connector Operations
Danbury, CT 06810
Apr 17, 2002 Series 1.0/2.3 coaxial connector interface delivers RF performance in switching equipment operating at frequencies up to 4 GHz. Its push-pull coupling mechanism allows installation and de-coupling, and will not accidentally disconnect. These 50 ohm connectors have working voltage ratings of 250 Vrms and dielectric withstanding voltage rating of 750 Vrms. Straight and right angle connectors have VSWR of 1.3 (max) and 1.5 (max), respectively.

RIA Electronic, Inc.
Eatontown, NJ 07724
Apr 16, 2002 Type AJT03G stacked USB port can connect up to 127 peripheral devices such as mice, modems, and keyboards. USB also supports Plug-and-Play installation and hot plugging.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Apr 16, 2002 MTA-50 family of insulation displacement contact (IDC) style connectors have 0.050 in. contact centerlines in single, staggered row. This reduces board space for wire-to-board connectors while simplifying wire termination. Pre-loaded IDC contacts eliminate need for wire stripping and accommodate manual or semi-automatic assembly. Connectors are available in 2 to 28 contact positions and accept 26 to 30 AWG wire with 0.039 in. dia cable insulation.

Molex Inc.
Lisle, IL 60532-1682
Apr 10, 2002 HMC(TM) heavy-duty connectors simplify assembly, installation and field servicing for robots, machine tools, and other equipment. Connectors have crescent-shaped metal hood with rotating lock that can be actuated with one hand. This provides easy mating and unmating compared to previous double bale-lock system. Series is available in panel-mount and wire-to-wire styles with vertical and right angle hoods in circuit sizes from 12 to 72, rated to 35 A.

Norma Products, Inc.
Wixom, MI 48393
Mar 26, 2002 NORMACLAMP(R) FBSC constant-tension clamp compensates for changes in hose diameter due to fluctuations in temperature. One-piece design seals and automatically re-tightens when hose diameters increase or decrease. Integrated retaining mechanism holds clamp open during assembly. Chrome-free, corrosion-resistant coating is suitable for gluing. Clamp is available in various diameters with 12 and 15 mm bandwidths.

RF Connector Operations
Danbury, CT 06810
Mar 18, 2002 RS-3232-1 SMA male connector and RSA-3279-10 SMA female connector are made of gold-plated machined brass with gold-plated contacts and Teflon insulation. Panel-mount connectors have 0.500 in. square, 4-hole flanges with holes 0.339 in. on center. Machined Teflon insulation extends 0.126 in. with 0.085 in. dia. Gold-plated .012 in. dia solder post extends .051 in. from dielectric material. Each connector is shipped with protective plastic cap.

Kycon Inc.
San Jose, CA 95125
Mar 15, 2002 PC99 colored connector consists of 1 VESA connector sitting atop two PS/2 mini-DIN connectors. 15-pin VESA D-sub connector is made with blue PBT insulator, and has contact No. 9 recessed to allow last mate/first break on 5V supply voltage. Unit is suitable for graphic displays, and complies with DDC standards. Two 6-pin mini-DIN connectors come in PC99 colors with purple PBT insulator on left and green PBT insulator on right.

Samtec, Inc.
New Albany, IN 47151 1147
Mar 08, 2002 OPP Series one-piece power interface, rated up to 5 A, eliminates bent pin problems of multi-component devices. Connectors are soldered to main board and power board is attached by either metric or English mechanical fasteners. Interfaces are available with choice of 3, 7 or 10 contacts on 0.100 in. pitch. Optional alignment pins can be provided on top, bottom or both sides to ease processing, and ensure proper alignment when assembling boards.

Siemon Co., The
Watertown, CT 06795
Mar 06, 2002 IMAX(TM) plug and outlet withstand vibration, moisture, temperature extremes, and electromagnetic interference. Components provide category 5e Ethernet solution for factory floor and various facilities. With 1/4 turn of bayonet-style coupling nut, plug and outlet become fully engaged and sealed against liquids and other environmental contaminants. They have IP67 rating, and are available in UTP and ScTP versions.

Circuit Assembly Corp.
Irvine, CA 92618-2777
Feb 27, 2002 SCA-2 receptacles consist of staggered contact heights which enable hot-plugging. Alignment guides at both ends house grounding contacts and allow blindmateability. SCA-2 receptacles are installed on backplane to mate directly with SCA-2 plugs installed on disk drive. Tail configurations include through-hole pin and press-fit compliant pin. 80-pin receptacle supports SCSI-3 protocol, while 40-pin meets Fibre Channel industry standard.

ILSCO
Cincinnati, OH 45227 1426
Feb 20, 2002 UTILCO Power Grip Hot Line Connectors for high current overhead and equipment tap applications have direct drive eyebolt that is in line with V shaped jaw, creating mechanical wedge that assures constant 3-point loading on connection. Grooves in jaw serve to remove cable oxidation, thus improving integrity of connection as it is being installed. Power Grips accommodate multiple sizes of conductors in both main and tap side of connector.

Encoder Products Co.
Sandpoint, ID 83864
Feb 13, 2002 Accu-Coder(TM) Cube Series and model 702, 725, 758, and 225 encoders are available with Eurofast connector. Connector allows user to reduce stocking requirements for cord sets and similar components since cords can be used for encoder connections and other components of motion control systems (such as proximity sensors and photoelectric switches).

Bomar Interconnect Products
Ledgewood, NJ 07852
Feb 12, 2002 F Type V-Bite(TM) RF edgeboard connector offers up to -40.3 dB return loss at 2.3 GHz. 75 ohm connector is engineered for signal integrity in RF applications, and snaps and locks into place for secure PCB retention during hand or re-flow soldering. It is supported both above and below board to minimize stress on solder area. Manufactured of machined brass, and employing straight-through contact design, connector features beryllium-copper contact.

Samtec, Inc.
New Albany, IN 47151 1147
Feb 12, 2002 FleXYZ interfaces provide flexibility in X, Y, and Z axes by specifying number of rows, pins per row, and desired board spacing with standard interconnects. YTT Series headers and YTW Series board stackers mate with YTQ and YTS Series sockets to provide board spacings from 0.329 to 1.165 in. By using YTE Series elevated socket, board spacing can be increased to 1.705 in. Interconnects have 4-6 rows with up to 50 pins per row.

RIA Electronic, Inc.
Eatontown, NJ 07724
Feb 05, 2002 Type AJT01G USB port can be used to connect up to 127 peripheral devices such as mice, modems, and keyboards. It also supports Plug-and-Play installation and hot plugging.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jan 29, 2002 Micro MATE-N-LOK 3mm-pitch connectors have dual-beam contacts for improved mating area, and high temperature housings for IR processing. Single row contacts on 3mm centerlines accommodate installations where thin, tight connectors capable of handling up to 5 A are required. Units can provide power and signal I/O and power interface interconnections.

Samtec, Inc.
New Albany, IN 47151 1147
Jan 28, 2002 Q-Pair high speed interconnects in differential pair configurations allow electrical performance at up to 5GHz operating frequencies. Connectors can be partitioned to include both differential pair and single-ended signal pins, allowing board designer to optimize system for high speed where required, while minimizing impact on density.

Kycon Inc.
San Jose, CA 95125
Jan 22, 2002 4pin IEEE 1394 connectors operate at speeds up to 400 Mbps. Through-hole connectors, available for use with 0.8 and 1.6 mm thick PC boards, are made of black PBT thermoplastic, and feature indented metal pegs for PCB retention. SMT connectors are made of black PA6T high temperature plastic, and have enlarged solder tabs for PCB retention. Both styles are shielded to control EMI/RFI, and have gold plated contacts in mating area and tin/lead on tails.

Hirschmann, Richard, Of America, Inc.
Pine Brook, NJ 07058
Jan 22, 2002 EASi/oN Modular Field Bus I/O system provides tool-free means to connect peripherals and other components. It combines plug-in bridging blocks, power feed, field bus connection, and connecting cables, along with integrated module catches and standard DIN rail mounting. System permits complete I/O systems to be removed from circuit without removal of other field bus subscribers. EASi/oN works with DeviceNet, Profibus and CAN.

RF Connector Operations
Danbury, CT 06810
Jan 04, 2002 TNC males with reverse threads include RT-1202-C crimp connector for RG-58/U cable and RT-1227 reverse thread TNC male to reverse thread TNC female right angle adapter. Reverse thread SMA females include RT-1142 adapter with reverse threaded SMA female on one end and standard BNC female on other end. Nickel plated RT-1005-C reverse thread N male crimp connector is for RG-58/U and gold plated cable. RT-300-1C1 SMA male crimp connector is for RG-142/U cable.