|
|
|
Mounting & Attaching Products ->
Mechanical Adapters
Mechanical Adapters
(Showing headlines 1 - 20) more ....
|
 Bump Adapters fit any BGA device on 0.40 mm pitch board.Aries Electronics, Inc.
Bristol, PA 19007-6810
Nov 19, 2009
Fine Pitch Bump Adapters allow use of higher pitch devices on boards with pitches down to 0.40 mm. While tops have landing pads that can be designed to accept any device on any pitch and settle into fine pitch footprints, bottom has raised connection pads up to 0.010 in. that facilitate mounting of adapter to target board. Adapters, which can operate up to 221°F (FR4) and 266°F (lead-free), can be manufactured for RoHS compliance.
|
Multi-Extrusion Gaskets provide EMI shielding.Laird Technologies - EMI
St. Louis, MO 63045
Nov 18, 2009
Extruded in various sizes and profiles, EMI Gemini(TM) Gaskets combine thin, electrically conductive filler elastomer gasket layer and inner, non-conductive silicone coated core gasket. Products provide EMI protection with minimized deflection while sealing against environmental influences such as moisture and dust. Gaskets are suited for military, medical, and commercial applications requiring application-specific shielding.
|
 Tube Fittings aids in fluid handling applications.Colder Products Co.
St. Paul, MN 55114
Oct 27, 2009
Featuring precise hose barbs and thread forms to ensure a secure fit, FitQuik(TM) Connectors are available in black and white nylon and animal-free, natural polypropylene. Fitting styles include luers, tube-to-tube, thread-to-tube, blood pressure fittings, and are offered with NPT and 10-32 threads.
|
 Sanitary Gasket delivers optimal sealing performance.W. L. Gore & Associates, Inc.
Elkton,, MD 21921
Oct 20, 2009
Made from 100% expanded PTFE, GORE(TM) STA-PURE(TM) Sanitary Gasket meets ASME BPE equipment seal standards and passes ASME BPE intrusion categories I and II after 500 SIP cycles. It can be used universally and integrated into various systems, allowing standardized operations. Combining dimensional stability with chemical inertness of PTFE, gasket suits critical bioprocess systems in various applications.
|
 BGA Socket Adapter accepts Samsung MCP memory device.Ironwood Electronics, Inc.
St. Paul, MN 55121
Oct 20, 2009
Consisting of solder balls on bottom side and round pads on topside, Model SF-BGA199B-B-05 accommodates 0.65 mm pitch, 12 x 16 mm body, 18 x 22 array Samsung MCP KMYFE0C0CM-D300 memory ICs. If target circuit board already exists or mounting holes cannot be drilled into target board, then BGA SMT adapter can be used with Ironwood GHz socket. Constructed with high temperature FR-4, adapter assures match with target PCB's CTE and prevents failures that may occur with CTE mismatch.
|
 Steel Bellows Couplings offer nominal torques from 24-120 Nm.Mayr Corp.
Waldwick, NJ 07463
Oct 16, 2009
Available in 3 sizes, backlash-free primeflex Couplings can be plugged in and dismantled safely without risk, and can be mounted onto shafts via clamping or shrink disk connections. Torque is transmitted via frictional locking or via frictional and positive locking. Misalignment capability compensates for axial, radial, and angular shaft misalignments, while internal mechanism with integrated stop prevents damage that can occur with excess mounting pressure.
|
BGA Adapters connect 0.50 mm devices to 1.00 mm boards.Aries Electronics, Inc.
Bristol, PA 19007-6810
Oct 16, 2009
Designed to adapt smaller pitch devices to larger footprints, Switch-A-Pitch Adapters eliminate need for laser-drilled microvias on motherboards while enabling use of standard line and trace spacing down to 0.003 in. Adapters have tops with BGA landing pads on 0.50 mm pitch and bottoms fitted with BGA balls on 1.00 mm pitch. Operating up to 221°F for FR4 or up to 266°F for lead-free, adapters feature non-solder mask defined pads finished with electroless nickel immersion gold.
|
Load Port meets wafer isolation and fab requirements.Kensington Laboratories
Richmond, CA 94804
Oct 12, 2009
Automatic Door Opener(TM) delivers operational speed, cleanliness, reliability, and integration flexibility for loading/unloading SEMI standard 300 mm FOUPs. With MCBF over 650,000 cycles and calculated MTBF over 20,000 hr, system delivers better than Class 1 particle performance when integrated in Class 100 or better environment. It requires no periodic lubrication or re-alignment and utilizes DSP controlled electro-mechanical/pneumatic closed-loop servos for repeatable motion.
|
 Chip Size BGA Adapter suits automotive applications.Ironwood Electronics, Inc.
St. Paul, MN 55121
Oct 02, 2009
Constructed with Torlon 5530 material, SFS-BGA104A-52 allows 0.5 mm pitch, 8 x 8 mm body, and 15 x 15 array BGA devices to be socketed and operate without compromising performance. Giga-snaP(TM) BGA SMT adapter pair consists of SFS-BGA104A-52 female sockets with machined pins and sleeve spring that matches male pin LSS-BGA104A-51. Required force per pin of 40 g facilitates plugging/removal, and physical connection length of 2.8 mm promotes high-frequency signal transmission.
|
 Splicing Irons/Kits enable in-field expansion joint repair.Papco Industries, Inc.
Northvale, NJ 07647
Sep 25, 2009
Splicing irons, used for making emergency in-field repairs of non-metallic expansion joints, are available individually or as part of professional splicing kit. Latter includes splicing iron (P38), stapler, staples, spray adhesive, PFA splice film, spare fuses, splice rubbing block, scissors, and instruction manual. For protection and portability, all items are stored in watertight, dust-tight, foam-lined Pelican case.
|
 Adapter allows prototyping of BGA ICs.Ironwood Electronics, Inc.
St. Paul, MN 55121
Aug 27, 2009
Constructed with gold plated solder-tail machined pins, PA-BGA117C-P-S-01 prototyping adapter interfaces 117 position 0.075 in. pitch BGA SMT land pattern to 0.100 in. center pin grid array. Clam-shell spring pin ZIF socket, SS-BGA117C-01 can be used with adapter for access to address and data lines. Socket operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss, and can handle up to 100 W with custom heat sink. Self inductance of contactor is typically 0.62 nH/pin.
|
 Removable Liquid Gasket seals frequently serviced flanges.Henkel
Rocky Hill, CT 06067
Aug 25, 2009
Designed to seal close-fitting flanges against same temperatures, pressures, and chemicals as traditional liquid gaskets, Loctite® 5203(TM) removes without machining or chemicals. Red anaerobic gasketing material ranges in viscosity from 50,000-100,000 cP and fills gaps to 0.010 in. without primer or 0.020 in. with primer. Designed to withstand operating temperatures from -65 to 300°F, gasket fully cures in 15 min to 6 hr and is suited for use in engines, pumps, and compressors.
|
 O-Rings resist corrosion match application requirements.Interstate Specialty Products
Sutton, MA 01590
Aug 20, 2009
Made from perfluoroelastomer, Viton®, neoprene, nitrile, EPDM, solid and cellular urethane or silicone, and santoprene, custom fabricated O-rings can be spliced, vulcanized, and supplied in sizes from 1/32 - 48 in. I.D. with 1/16 - ¼ in. cross sections, depending upon material and construction. They are available in hardness from supersoft to 90 Durometer. Applications include wide range of pumps, valves, compressors, and devices used in medical instruments.
|
 Expansion Joints feature non-metallic design.Papco Industries, Inc.
Northvale, NJ 07647
Jul 29, 2009
Suited for applications where system temperature does not exceed 400°F, Series 400 may be constructed of 2 plies of FKM fluoroelastomer and 1 or 2 plies of reinforcing material such as corrosion-resistant wire mesh or fiberglass cloth. Fluoroelastomer and reinforcing material are calendared and vulcanized to form rugged unit that is impervious to flue gases and resistant to acids. All joints are available in flanged designs, which feature continuous molded corner.
|
 Expansion Joint Repair Kit installs during operation.Papco Industries, Inc.
Northvale, NJ 07647
Jul 23, 2009
Expansion joint repair kit includes non-permeable bolster that covers damaged area to minimize leakage in or out. Bolster is secured with adjustable, high-tension straps, which can be secured to exposed bolt threads or frame itself without welding or removing any hardware. Patch seals damaged expansion joint until belt can be replaced, and repair kit can be installed in minimal time without shutting unit down. Various kit components may be reused.
|
 Adapters provide smaller pitch pads for larger pitch boards.Aries Electronics, Inc.
Bristol, PA 19007-6810
Jul 17, 2009
Facilitating high density interconnect (HDI) construction, BGA Switch-A-Pitch Adapters allow tighter pitch devices to be placed on existing larger pitch designs. Series includes models with tops where BGA landing pads are on 0.40 mm pitch and adapter bottoms are populated with BGA balls on 1.27 mm pitch. Measuring 0.062 in. thick, design eliminates need for laser-drilled microvias on motherboards; standard line and trace spacing down to 0.003 in. can be used.
|
 Custom O-Ring Kits suit hydraulic fittings and adapters.PIRTEK USA
Rockledge, FL 32955
Jul 09, 2009
Specifically designed to provide O-rings for popular hose fittings and adapters, ORK-C4 Kits consist of carrying case, 4 separate product boxes with PIRTEK branding, and description of contents in each box. O-rings are suitable for S.A.E. flanges, flat face O.R.F.S., and O-ring boss male fittings.
|
Elastomers exhibit explosive decompression resistance.Trelleborg Sealing Solutions
Fort Wayne, IN 46801
Jul 07, 2009
Developed for oil and gas applications, XploR(TM) range of explosive decompression resistant materials includes compounds in HNBR, FKM, and Isolast® Perfluoroelastomer (FFKM), each of which demonstrates explosive decompression resistance. Materials in XploR(TM) range satisfy NORSOK M-710 sour service and Rapid Gas Decompression test conditions. They are available in standard international o-ring sizes and cross sections, along with custom-engineered solutions and seal designed profiles.
|
 Sealing Gasket is designed for D-shaped chassis connectors.Neutrik
Lakewood, NJ 08701
Jun 25, 2009
Providing dust and water resistant assembly for D-Shaped chassis connectors, SCDP gasket is designed for use with opticalCON DUO and QUAD fiber connectors and/or any Neutrik product using standard D-style cutout, including water resistant USB/FireWire and HDMI feedthroughs. Gasket is available in 6 different colors including black (SCDP-0), red (SCDP-2), yellow (SCDP-4), green (SCDP-5), blue (SCDP-6), and white (SCDP-9).
|
 Sealing Gasket is available in sizes ranging from 1-8 in.Anvil International, Inc.
Portsmouth, NH 03802
Jun 24, 2009
Designed for low-temperature performance applications, patent pending Flush Gap(TM) gasket features triple sealing ribs on each gasket seal face. It contains center rib which fits flush over gap between pipe ends and closes off gasket cavity, allowing for reduction of buildup of moisture and ice which can cause leakage under freezing conditions. When combined with Gruvlok Xtreme(TM) lubricant, Flush Gap(TM) provides gasket seal for grooved couplings in extreme temperature applications.
|
(Showing headlines 1 - 20) more ....
|
Latest Products in the News |
Elastoproxy (Elasto Proxy), Inc. - February 17, 2009 New Automotive Gasket Technology
DuPont Performance Elastomers - July 9, 2008 Spansion Adopts DuPont Performance Elastomers Kalrez® 9100 Seals for Increased Productivity
Sifter Parts & Service - May 27, 2008 Oil Resistant Gasketing for the CS-1 Sifter
Garlock Sealing Technologies - August 13, 2007 Garlock Sealing Technologies Launches New Gasket Line at Chem Show
Parker Hannifin Corp. - October 25, 2006 New Parker Chloramine Resistant Materials Seal Water Systems
Leviton Manufacturing Co., Inc. - September 27, 2006 Leviton Expands Industrial Offering with Rhino-Hide's® 49 Series
More Products in the News...
|
|
|
|
 |
ThomasNet News Advertisers
|
 |
|