Instron    Norwood, MA 02062-2643
Feb 13, 2013 Available in 22,000 and 56,000 lbf capacities, Manual Wedge Grips are suitable for tensile tests on composites, metals, and plastics over temperature range of -112 to +482°F. Grips incorporate moving body, driven by worm gear drive, which closes jaw faces together in self-centering action to clamp specimen. Symmetrical construction of grip body provides even clamping of specimen under load. Together, these features ensure accurate specimen alignment, satisfying Nadcap AC7122-1 and AC7101.

Re-Grip, Inc    Lake Elisnore, CA 92530-2306
Jan 24, 2013 Designed to fit any cylindrical or semi-cylindrical handle, Re-Grip Handle Grips assist in maintaining control of tools by providing non-slip, cold resistance qualities and redistributing bad energy caused by impact and excessive vibration. Grips help minimize safety risk and repetitive motion disorders. Typical applications include hammers, shovels, pneumatic tools, wrenches, brooms, and brushes.

INSTRON    Grove City, PA 16127
Jan 21, 2013 Designed to enhance gripping performance, usability, and operator safety, hydraulic side-action grips with DuraSync technology are field-serviceable and can be used in high-capacity metals testing. DuraSync technology consists of mechanical synchronizer located outside gripping pocket, which prevents mechanical failure due to contamination. Adjustable clamping force alleviates specimen slippage and grip breaks, and opposing jaw faces repeatedly self-center during specimen clamping.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Jan 11, 2013 Unilock 5-axis workholding product offerings locate/stabilize workpieces. With dual 45° 105/65 Base Plates, 5-Axis Duo Bridge can mount directly on top of 5-axis table or be loaded through pair of zero-point chucks. Unilock 5-Axis Riser Chucks, Extensions, and Reductions, with 80 mm working diameter, are offered on base plates or as stacking modules in 75 and 100 mm heights. Infinitely adjustable First Grips and Dovetail Grips are limited only by length of thread that pulls jaws together.

Heyco Products    Toms River, NJ 08753
Nov 12, 2012 Heyco®-Tite Straight-Thru Snap-In-2® Liquid Tight Cordgrips handle flexible cords with .065-1.000 in. dia, while Pigtail versions are suitable for .065-.709 in. dia cords. Both products fit panels from .062-.125 in. thick. Providing liquid tight strain relief protection, they ensure IP 65 and IP 67 seal, have 94V-2 flammability rating, and operate over -22°F to +212°F temperature range. Units are constructed of nylon 6/6 with Buna N or TPE sealing gland and install with no tools or locknuts.

Merritt, J. R., Controls, Inc.    Stratford, CT 06615
Jul 02, 2012 Made of Delrin, Models MG9, MG9-4, and MG25 meet needs of industry users who operate overhead, container, and gantry cranes, as well as mining dredges, draglines, and shovels. When grips are mounted on joysticks and master switches, user can maneuver joystick by placing handle shaft in space between thumb and pointer finger. Palm handles accommodate tactile, sealed, high-life, and momentary pushbuttons, maximizing functionality in one controller.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Jun 20, 2012 Intended for use when additional support to cable is required, Spiralblock® Cord Grips have flexible, nylon design that lets cable bend without breaking or putting excess strain at entry point to enclosure. Products support up to 5 in. of cable as it enters enclosure or panel and can be used in environments from -20 to +90°C. Color options include light grey and black, and thread options include PG and Metric.

Re-Grip, Inc    Lake Elisnore, CA 92530-2306
Jan 13, 2012 Re-Grip fits any handle that is cylindrical or semi-cylindrical on tools, sports equipment, or in industrial applications. Elastic grip is extended by helically spun inner coil with UV-resistant properties. Non-slip properties and ergonomic design redistribute energy to reduce muscle fatigue. Available in standard 7 in. length, material has clearance of 1.3, 1.6, and 2.1 in. Custom sizes are available.

Heyco Stamped Products, Inc.    Toms River, NJ 08754
Dec 19, 2011 Intended for use in clearance or threaded holes, Heyco®-Tite Hybrid Liquid Tight Cordgrips deliver strain relief protection. Products make it possible to insert different diameters of cable, from .04-2.17 in., into same cable gland with good sealing. Along with nickel plated brass enclosure, IP68-rated cordgrips feature nylon finger design for secure wire gripping and sealing gland molded in TPE material for flexibility.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Nov 01, 2010 Designed for use when additional support to cable is needed, Spiralblock® Cord Grips support up to 5 in. of cable as it enters enclosure or panel. Flexible design of nylon grip allows cable to bend without breaking or putting excess strain at cable entry point to enclosure. Available in light grey or black and in PG or Metric threads, grips are suitable for environments ranging from -20 to 90°C.

Heyco Products    Toms River, NJ 08753
Aug 06, 2010 Available in PG, NPT, and metric threads in variety of sizes, Right Angle Cord Grips feature all nylon construction with Buna N sealing gland that resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Each is molded in open position to facilitate installation. After cable insertion, fitting snaps closed while bending cable without damage. UL and CSA certified, cord grips are suitable for NEMA 6P enclosures and have 94V-2 flammability rating.

Heyco Products    Toms River, NJ 08753
Jun 02, 2010 Providing watertight seal for PV module output leads to inverters, Masthead(TM) II Cordgrips are constructed of UV resistant nylon with TPE or Buna N Sealing Gland to resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. They also meet 94 V-2 flammability and IP68 ratings, and have temperature rating of -22 to 212°F. Provided with assembled metal locknut and NPT threads, cordgrips can be attached directly to rigid (PVC) or EMT-type conduit via adapter.

Pass & Seymour/Legrand    Syracuse, NY 13221
Apr 23, 2010 Available in 316L stainless steel for use in corrosive and exterior environments, FS 41 FASTRUT Connector secures wire mesh tray to strut channel framing without bolts, nuts, or clamps. Unit snaps into place and is held secure by spring steel materials and locking edge design. Connector attaches any size wire cable tray to channel framing using 2 connectors for 12 in. tray or narrower and 3 connectors for larger tray widths.

Appleton Electric    Cambridge, ON N3H2N1
Jan 26, 2010 For use in food processing plants, breweries, waste water treatment centers, and petrochemical facilities, Stainless Steel and Nickel Plated Aluminum Corrosion-Resistant Cord Grips are available in hub sizes of 3/8-2 in. or 3/8-1 in. Compact cord grips terminate flexible metallic electrical cable at conduit hub or knockout to provide environmental seal against water and other contaminants. They are offered with or without strain reliefs that protect against cable pullout and conductor breakage.

Heyco Products    Toms River, NJ 08753
Jan 22, 2010 Available in multiple sizes for cable diameters ranging from 0.10-1.00 in., Electromagnetic Compatibility (EMC) Cordgrips handle temperatures from -40 to 212°F. They are made of nickel-plated brass with TPE gland, have long thread for use in standard or thick panels and provide 360° shield contact with sleeve due to braided shield which runs into gland. IP68 rated cordgrips are available in PG and metric thread with optional EMC locknuts that have cutting teeth to provide optimal shield contact.

Heyco Products    Toms River, NJ 08753
Nov 30, 2009 Designed to replace combiner boxes in solar rooftop installations, Solar Masthead(TM) cordgrips are resistant to salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Constructed of UV resistant nylon with TPE or Buna N sealing gland, IP68 and 94V-2 flammability rated units can handle temperatures from -22 to 212°F. They are threaded into adapter that allows them to be attached directly to rigid (PVC) or EMT type conduit.

General Machine Products Co.    Trevose, PA 19053
Oct 23, 2009 Available in sizes ranging from 1-2.5 in. in length, Innerduct Pulling Eyes (Model 61510) feature threaded body that provides secure attachment to innerduct conduit. Hole in threaded end of pulling eye body provides tie-off of innerduct pulling line or tape, ensuring that unit is not lost during pulling operation. Also available with swiveling head-end and hex feature, pulling eyes can accommodate conduit inter-diameter dimensions ranging from 1-2.18 in.

Heyco Products    Toms River, NJ 08753
Aug 14, 2009 Installing without tools or locknuts, Liquid Tight Snap-In Multi-Hole Cordgrips house multiple wires at one entry point while providing liquid tight seal around each wire at electrical panel. Click in place fit reduces tightening errors, while ratchet design of sealing nut assembly provides anti-vibration and firm grip on cable. IP64 rated, constructed of nylon with TPE sealing glands, cordgrips' fingers fit 0.032-0.093 in. panels and prevent rotation when used in Double D mounting holes.

Mark-10 Corp.    Copiague, NY 11726
Mar 10, 2009 Capable of handling sample thickness of 6 mm maximum, model G1061 wedge grip suits tensile testing applications up to 1,200 lb. It features 19 mm wide serrated and hardened stainless steel jaws, which ride on rollers and are opened with ergonomic spring loaded knob and rack and pinion type mechanism. Suited for testing of plastics, metals, packaging materials, and medical devices, grip is designed to mount on any force gauge, test stand, or material tester.

Stafford Manufacturing Corporation    North Reading, MA 01864-0277
Sep 18, 2008 SlipKnot(TM) is molded from weather-resistant nylon for use with braided or stranded lines to create secure, adjustable knot. Featuring ribbed construction for sure grip, egg-shaped device fits in palm of hand. Feed line through SlipKnot(TM), and, by holding one side and twisting the other, internal mechanism grips line with up to 200 lb holding power, depending upon rope construction. Available in blue, orange, and yellow, it comes in 3 sizes for 3/8, 7/16 and ½ in. rope.