Mounting & Attaching Products

Mechanical Power Transmission, Mounting & Attaching Products

Dual Feedback Voice Coil Positioning Stage from H2W Technologies

May 06, 2017

Santa Clarita, CA - The VCS20-020-CR-01-MC-F3K voice coil positioning stage has dual feedback capability. It can operate either under closed loop position control with force monitoring or closed loop force control with position monitoring. It uses H2W voice coil motor NCC20-18-020-1A to generate a continuous/peak force of 2.0 lbs [8.9 N]/6.0 lbs [26.7 N] with a total stroke length of 2.0 in... Read More

Material Handling & Storage, Mounting & Attaching Products

Haugen Telehandler Attachment Incorporates Straightpoint Load Cell

May 06, 2017

Forklift and telehandler accessories manufacturer Haugen Attachments is offering the innovative Smart Hook, an attachment that incorporates a 7.2-ton (14,000-lb.) capacity Straightpoint load cell.

The 225-lb. Smart Hook can be easily attached to all kinds of telehandlers, giving end users a Crosby swivel hook that incorporates a wireless load shackle positioned at the center of a... Read More

Health, Medical, & Dental Supplies and Equipment, Mounting & Attaching Products

Qosina Expands Its ENFitT Product Line

May 05, 2017

Qosina has added a number of components to its extensive ENFitT product line, including male and female connectors and caps, low dose syringes, spikes, adapters and Y connectors. ENFitT is a brand of enteral feeding connectors that meet the ISO 80369-3 standard, which was developed to improve patient safety and reduce the risk of small-bore misconnections used in liquid and gas healthcare... Read More

Mining, Oil Drilling, Refining Products & Equipment, Mounting & Attaching Products

Dril-Quip Wins Two Spotlight On New Technology Awards For Wellhead System And Connector

May 05, 2017

HOUSTON, May 2, 2017 - Dril-Quip, Inc. (NYSE: DRQ) was presented with two Spotlight on New Technology Awards at the 2017 Offshore Technology Conference (OTC) in Houston on May 1, 2017 for its BigBore-IIe™ Wellhead System and its DXe™ Wellhead Connector. The Spotlight on New Technology Awards showcase new and advanced technologies that are leading the industry into the future.

The... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

NBase-T RJ45 Connectors come with EMI spring fingers.

May 02, 2017

Available in single port, 4-port, 8-port, 12-port and 16-port configurations, NBase-T RJ45 connectors are suitable for 2.5GBase-T and 5GBase-T applications. Used for boosting speed from 1 to 5 Gigabits for distances up to 100 m on Cat5e and Cat6 networks, connectors use through-hole technology and withstand lead-free solder reflow temperatures up to 260°C. Units meet RoHS and UL standards.

Read More

Electrical Equipment & Systems, Mounting & Attaching Products

CDM Electronics Now Stocks the Latest Generation of Eaton's Micro-Military Circular Connectors

May 01, 2017

Ruggedized Connectors Deliver Unparalleled Performance in Mission-Critical Military and Aerospace Applications

Turnersville, NJ, April 26, 2017 - Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the availability of the latest generation of Eaton's Micro-Military Circular Connector Series with shell diameters as small as... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

PSM-ME-RS232 Serial Interface Isolators offer 3-way isolation.

May 01, 2017

Suitable for protecting RS232 devices and data transmissions by separating TX/RX data channels and the RTS/CTS control lines, PSM-ME-RS232 Serial Isolators provide maximum range of 15 m. Offering little immunity to interference, unit comes with common signal ground which is connected to grounded chassis housing. Product has an asymmetric voltage interface.

Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products

Bridgeport Fittings’ AMC50-QI EZ-Lock™ Takes Half the Time to Install, with no Tools Required

Apr 29, 2017

STRATFORD, Conn. (April 27, 2017) – Bridgeport Fitting’s AMC50-QI EZ-Lock connector makes fast, secure connections employing the industry’s only double-snap type AMC connector. Contractors simply snap the connector onto the cable, squeeze the lever and set into the knockout. The lever action also allows for easy, quick removal.

No tools are required with the AMC50-QI connector and... Read More

Mounting & Attaching Products

PEM® TY-D® Self-Clinching Cable Tie-Mounts and Hooks Securely Attach Cables and Wires to Electronic Chassis or Enclosures

Apr 29, 2017

PEM® TY-D® self-clinching cable tie-mounts and hooks from PennEngineering® create secure metal attachment points for mounting wires and cables to electronic chassis or enclosures. The hardware installs quickly and reliably in thin steel or aluminum panels, eliminates any need for screws or adhesives, and can be positioned permanently at specified locations and angles to promote optimized... Read More

Fasteners & Hardware, Mounting & Attaching Products

Improved Flex Life For Coax (RF) Assemblies

Apr 27, 2017

With the expansive use of Coax (RF) cable assemblies in Aerospace, Communication, Industrial and Military atmospheres. Rugged solutions are needed to meet specific industry standards and stringent frequency requirements.

ISC Engineering’s improved overmolded solution helps provide a high flex, rugged part which in many cases helps reduce the total cost of ownership. Overmolding is an... Read More

Mounting & Attaching Products

Tapered Strain Relief Solutions For Custom Products

Apr 27, 2017

ISC has improved upon our standard and made to order molded slip-on strain relief’s by integrating a tapered front section. Standard strain relief’s are molded with a flexible PVC material, other thermoplastic materials are available such as polyurethane and TPE’s. The addition of a taper allows for easier insertion with plastic enclosures for electronics, medical devices and other... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Nautilus N Connector comes with an internal sealing.

Apr 25, 2017

Available in rear mount configuration, Nautilus N Connector is suitable for harsh environments. Featuring O-ring for ingress protection through inner contact and panel, unit meets IP67 and IP68 standards.

Read More

Mechanical Components and Assemblies, Mounting & Attaching Products

Universal Case Feet are available in range of eight kits.

Apr 25, 2017

Available in anthracite gray, light gray, off white and black colors with or without tilt legs, Universal Case Feet are used for laboratory equipment or desktop instrument enclosures. Measuring 1.181 in. diameter x 0.472 in. high, feet can be fitted to plastic or metal enclosure with wall thicknesses of up to 0.118 in. Units come in two kits which include four foot bodies, push-in anti-skid... Read More

Mechanical Power Transmission, Mounting & Attaching Products

Dual Feedback Voice Coil Positioning Stage

Apr 24, 2017

The VCS20-020-CR-01-MC-F3K voice coil positioning stage has dual feedback capability. It can operate either under closed loop position control with force monitoring or closed loop force control with position monitoring. It uses H2W voice coil motor NCC20-18-020-1A to generate a continuous/peak force of 2.0 lbs [8.9 N]/6.0 lbs [26.7 N] with a total stroke length of 2.0 in [50.8 mm]. The... Read More

Electronic Components & Devices, Mounting & Attaching Products

Make Data Centers More Energy Efficient with Low Contact Resistance Connectors from Stäubli

Apr 18, 2017

Safe and reliable connector solutions from Stäubli Electrical Connectors.

With an increasing trend in the number and size of data centers, the call for energy efficiency gets louder. That means data center components need to be more energy efficient and increase use of power sources with a small carbon footprint such as solar or wind power. Equipment needs to be safe, reliable and... Read More

Electronic Components & Devices, Mounting & Attaching Products

Reduce the Risk of Eectrical Shock with CombiTac Connectors

Apr 18, 2017

Modern critical surgery rooms are designed on a modular basis and fitted out specifically for the task at hand. With CombiTac, you can connect the mobile supply unit of medical diagnostic, monitoring, and treatment devices with a custom-configured module meeting your signal, data, power, air and fluid requirements all in a compact, space-saving design.

The use of equipotential grounding... Read More

Architectural and Civil Engineering Products, Communication Systems & Equipment, Mounting & Attaching Products

AMICO Security Presents the Ultimate Multi-Layered Border Solution

Apr 14, 2017

BIRMINGHAM, Ala., April 11, 2017 - AMICO Security, the nation's leading manufacturer of high-security perimeter systems, is introducing to the market the ultimate multi-layered border security solution. This solution combines the latest in radar surveillance technology with high security layered, double walled fencing and state of the art detection technology to create a comprehensive... Read More

Mounting & Attaching Products

MH-18 Position Hinges come in glass-filled nylon housing.

Apr 11, 2017

Supplied with 4 N-m, 6 N-m, or 8 N-m of constant holding torque, MH-18 Molded Nylon Position Hinges are configured for 270º motion. Using ReellTorq® clip technology for 20,000 cycles fully qualified life, hinges are suitable for position control and adjustability applications in industrial, medical, and offices. Product features door-hinge mounting design and textured black finishing.

Read More

Mounting & Attaching Products

TechnoPlus Enclosures include mounting brackets.

Apr 10, 2017

Available in five sizes, Rolec's TechnoPlus enclosures include a bracket that allows them to be horizontally or vertically mounted on poles, masts, and street signs. Features include screw ports for the mounting brackets and retaining straps for recessed lids. Enclosures have an IP66 rating. Comes in light gray but can be customized upon request.

Read More

Fasteners & Hardware, Mounting & Attaching Products

C&U Americas Hub Unit Bearings I, II, III Provide OEM Quality and World-Class Value

Apr 08, 2017

- Versatile wheel-end application with ball or tapered roller options, driven or non-driven-

Plymouth, MI… C&U Americas, LLC, the North American subsidiary of the C&U Group, one of the world’s top 10 bearing manufacturers and China’s largest bearing producer, offers versatile, world-class quality hub unit bearings for use in automotive wheel ends. The bearings are precision made... Read More