Mounting & Attaching Products

Electronic Components & Devices, Mounting & Attaching Products

BGA Socket Adapter supports 500-pin 0.65 mm pitch package.

April 13, 2015

Giga-snaP™ BGA Socket Adapter pairs SFS-BGA500C-52 female BGA sockets with BeCu pins assembled into substrate that matches male pin adapter. SFS-BGA500C-52 allows 0.65 mm pitch, 14 x 17 mm body, 20 x 25 array 500 ball BGA package to be placed in socket and operated without compromising performance in high-speed applications. Both socket and adapter are constructed with high-temperature... Read More

Mounting & Attaching Products

Ceiling Mount Adapter handles up to 80 in. flat panel displays.

April 9, 2015

Featuring black powder coat finish, weighing 23.6 lb, and offering adjustable 0° to 15° tilt, PDS-LCM2B allows VMP PDS-LCB large flat panel tilt ceiling mount to accommodate two 37–80 in. flat panel displays, back-to-back, with combined weight of up to 360 lb. This dual large flat panel ceiling mount adapter, measuring 12.1 x 34.8 x 22 in. (variable width), accommodates hole patterns from... Read More

Mounting & Attaching Products

Wall Bracket maintains optimal wireless access point orientation.

April 8, 2015

Right-angle wall bracket enables secure, horizontally oriented mounting of wireless access points to walls in residence halls, hotels, and other hard lid venues. Conduit, raceways, and cable can be terminated in bracket to provide for clean appearance, and access points can be locked in place using access point manufacturer's locking features. Available options for Models 1008 through 1013... Read More

Mounting & Attaching Products

Adjustable Hinges allow for precise positioning.

April 6, 2015

Suitable for inch and metric applications, EN 236 Plastic Adjustable Alignment Hinges allow for technically and visually perfect positioning and alignment of door in frame. Serrations at wings of hinge and at adjusting bushings create form lock that prevents hinge from moving after installation. Depending on installation position of bushings, hinges are adjustable in both vertical and... Read More

Electronic Components & Devices, Mounting & Attaching Products

Low-Profile Power Connector facilitates layout and connection.

April 3, 2015

Allowing mating/unmating of power and signal cables from plug-in side, PS3F Series front access hybrid connector eliminates need for on-site cable wiring. Power contacts support up to 100 A with rated voltage to 1,000 AC/DC, and signal contacts support up to 1 A per contact and interface with 2 Hirose GT8E connectors utilizing one 8- and 10-position connector. Blade contact structure features... Read More

Mounting & Attaching Products, Optics & Photonics, Vision Systems

Shotoku Announces Landmark Sale To Argentinian Broadcaster America TV

April 3, 2015

Buenos Aires, Argentina – Shotoku Broadcast Systems, a leading international manufacturer of advanced camera support products, has announced the sale and installation of 15 Shotoku TP-200 lightweight pedestal and state-of-the-art SX300 EFP pan tilt head systems to America TV, a channel owned by Multimedios America based in Buenos Aires, one of the country's top five national television... Read More

Material Handling & Storage, Mounting & Attaching Products

Anti-Shock Components double as emergency food source.

April 2, 2015

Designed to reduce vibration and optimize equipment stability, Gell-Low Anti-Vibration Shock Mounts are created from recycled bovine by-products and produced in variety of sizes. Compression-mounted vibration isolators are also suitable for mounting under mobile cameras on drones and for isolating vibration in UAV applications. Available in red (strawberry), green (lime), and black (liquorice),... Read More

Mounting & Attaching Products, Optics & Photonics

Hirose Announces Licensing Agreement with Samtec for BF4 Active Optical Connector with Built in E/O and O/E Converter

April 2, 2015

Hirose Electric announces an agreement with Samtec Inc. to license the popular BF4 embedded Active Optical Connector system. SIMI VALLEY, CA – Hirose Electric and Samtec, Inc. are excited to proceed with this second source agreement. “The BF4 connector is an excellent product for factory automation and medical industries. This addition to Samtec’s line of Electro-Optic products provides... Read More

Fluid & Gas Flow Equipment, Mechanical Power Transmission, Mounting & Attaching Products, Software

The New Basic TEB/LEB Digital Proportional Valve from Atos

April 2, 2015

New Basic TEB/LEB digital proportionals - the Best ever Atos product! Atos is proud to be the first worldwide electrohydraulic company presenting a new range of high performances digital proportionals with same prices of analog models. The software setting of scale, bias, linearization and dynamic response allows to customize the valve's behavior, thus increasing the electrohydraulic system... Read More

Fasteners & Hardware, Mounting & Attaching Products

Torque Insert features position-control technology.

March 31, 2015

Featuring 5 mm wide housing and overall single-fin profile, Model TI-C5M is suited for consumer electronics applications. Unit offers symmetric torque ranges from 1.3–2.66 lb-in. and is engineered for press-fit mounting into metal or plastic materials. Delivering full 360° range of rotation with minimal freeplay, insert can perform for fully qualified service life of 30,000 cycles. Unit is... Read More

Materials & Material Processing, Mounting & Attaching Products

Putting Steel in the Shade: Victrex® Peek Valve Plates Last Twelve Times Longer

March 31, 2015

HuanTian Industrial and Victrex are Developing a Parts Material Standard for China's Reciprocating Compressor Industry WEST CONSHOHOCKEN, PA  USA - The efficiency and reliability of reciprocating compressors can be substantially improved through the use of valve plates made of VICTREX® PEEK. This is the conclusion built on usage results at the end-users of the Chinese compressor... Read More

Mounting & Attaching Products

Bellows Coupling Replaces Gearbox in Cryogenic Application

March 31, 2015

Bellows Coupling Replaces Gearbox in Cryogenic Application Cedar Grove, NJ — Gearboxes used in rotary drive systems operating near absolute zero temperatures, are often adversely affected by the extreme temperatures of a cryogenic environment. The most common failures are the result of differential thermal expansion which can cause the gears to uncouple. A Physics Research and Development... Read More

Fasteners & Hardware, Mounting & Attaching Products

Strain Relief is designed for Amphenol AT-SR01 Series Connectors.

March 31, 2015

Providing bend relief, Multi-Flex strain relief for Amphenol AT-SR01 Series connectors features injection-molded, low-durometer material over existing shrink tube lip. This provides aesthetic compliment to cables and harnesses while promoting cable assembly life by limiting bend radius. Construction characteristics promote longevity for field, off-road, and under-hood applications. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Low-Profile, High Density Interposers provide design flexibility.

March 27, 2015

Used as interposers or integrated into connector housings, Z-Ray™ 0.80 mm pitch, one-piece compression contact arrays offer 28+ Gbps performance. ZA8 Series, available with choice of dual compression contacts or single compression with solder balls, has up to 400 total BeCu micro-formed contacts and features 25 g normal force with .008 in. contact deflection. Available in customizable shapes... Read More

Mounting & Attaching Products, Test & Measuring Instruments

Precision Adjustable Shim simplifies leveling adjustments.

March 27, 2015

Eliminating trial and error of lifting machinery to slip in shims and wedges, Microshim lets user adjust stainless steel lifting bolt to raise/lower machine in height adjustments of 0.001 in. Each unit lifts and supports 10,000 lb, and applying adhesive to 2 sliding surfaces allows for adjustment before product is permanently locked to specific height. While shim is milled from solid block of... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Mounting & Attaching Products

Wire-to-Board Connector connects multiple coax cables in one step.

March 24, 2015

Reducing vehicle roof antenna installation time, GT36 Series provides one-step connection of multiple coaxial cables to PCB. Internal solution specifically enables attachment of 4 coaxial lines to automotive antennas, including shark fin antennas, and features rugged positive lock structure that offers lock strength of 98 N. RoHS- and ELV-compliant product has rated voltage of 50 Vac,... Read More

Cleaning Products & Equipment, Materials & Material Processing, Mounting & Attaching Products

ULVAC Receives Order for Resist Strip and Residue Cleaning System from U.S. MEMS Manufacturer

March 24, 2015

Methuen, Massachusetts - ULVAC Technologies, Inc. has sold a high throughput Enviro-Optima™ Resist Strip and Residue Cleaning System to a U.S. MEMS manufacturer. The system, built in Massachusetts, will be installed this spring at the MEMS manufacturer's facility. The customer evaluated the Enviro-Optima™ system at the ULVAC Applications Lab in Methuen, MA and has successfully converted... Read More

Construction Equipment and Supplies, Mounting & Attaching Products

Camera Track System minimizes space requirements.

March 23, 2015

Featuring streamlined triple track system with continual auto track-trolley alignment, TeleGlide TG4M delivers stable operation with almost no maintenance. Unit is Virtual Reality and Augmented Reality ready with no updates or retrofits required. Constructed of strong but lightweight aluminum components, frame offers smooth transitions between track sections and has trolley load capacity of 200... Read More

Material Handling & Storage, Mechanical Power Transmission, Mounting & Attaching Products

Miniature Piezo Nanopositioners offer 1/2 to 1 in. travel.

March 20, 2015

Measuring just 22 mm wide and based on piezo inertia drive motor, Q-Motion Linear Positioning Stages provide precision positioning and alignment of opto-mechanical components both in research and OEM instrumentation. Self-clamping motor provides long-term power-off position-hold capabilities without need for brake. Several options are available for Q-522 stage series, from open-loop designs to... Read More

Mounting & Attaching Products, Optics & Photonics, Safety & Security Equipment

Roof Mounts feature non-penetrating design.

March 20, 2015

Using 8 x 8 x 16 in. cinderblocks as ballast to avoid damaging roof surface, FRM Series is suited for wireless security surveillance systems, as well as DBS, off-air antenna, satellite internet systems, and point-to-point CCTV signal transmission. FRM-125 features 60 in. mast with 1.25 in. OD, while FRM-166 has 30 in. mast with 1.66 in. OD. In addition, FRM-200 provides 30 in. mast with 2 in. OD.... Read More