Mounting & Attaching Products

Machinery & Machining Tools, Mounting & Attaching Products, Robotics, Welding Equipment & Supplies

Airgas' Advanced Fabrication Technologies Group to Exhibit at FABTECH 2015

Nov 09, 2015

Airgas Experts to Demonstrate and Discuss New Technologies and Systems RADNOR, PA - Airgas, Inc. (NYSE: ARG), one of the nation's leading suppliers of industrial, medical, and specialty gases, as well as welding gases, consumables, and equipment, and related products, today announced that its Advanced Fabrication Technologies group will attend and exhibit at FABTECH 2015 (Booth #N18031),... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Analytic Systems introduces Ideal Multi-Bank Battery Isolator for 2 and 3 bank battery systems

Nov 06, 2015

Delta, BC, Canada – Analytic Systems introduces the IBI (Ideal Battery Isolator) for 2 bank and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electrical isolation between the battery banks. Ideal Diode technology reduces the voltage drop across the Isolator to a mere 160 millivolts even at 200 Amps of charging current so all... Read More

Architectural and Civil Engineering Products, Mounting & Attaching Products

Trim Plate increases medical gas outlet reliability.

Nov 05, 2015

Supporting up to 15 lb, Series B Outlet Hook Trim Plate takes unnecessary loads off medical gas outlets and equipment to help ensure consistent delivery of gas. Retractable hook design simplifies set-up without damaging equipment or medical gas outlet. Biomaster bacterial and mold growth reduction additive ensures protection for lifetime of product, which can be installed with any Series B or... Read More

Mounting & Attaching Products

Selected Thomas & Betts Blackburn® EZGround® Compression Connectors Now IEEE 837-2014 Compliant

Nov 05, 2015

MEMPHIS, Tenn. – Selected Figure 6 and C-tap connectors from the Blackburn® EZGround® compression connector line from Thomas Betts (TB), a member of the ABB Group, now comply with IEEE Standard 837-2014. The revised standard establishes more rigorous electromagnetic force (EMF) testing requirements for substation grounding applications. "A range of EZGround Figure 6 and C-tap compression... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Transparent Connector integrates LED for troubleshooting.

Nov 04, 2015

DEUTSCH DT Detector connector provides visual confirmation of power by producing glow via integrated 12 or 24 V LED to facilitate troubleshooting in areas with difficult connector visibility/accessibility. Two-way plug has transparent housing and yellow or red wedgelock. Respectively available with and without end caps, DT06-2S-SDT-CE27 and -CE28 accept size 16 DEUTSCH... Read More

Mounting & Attaching Products

Lightweight Design: ContiTech Develops World's First Polyamide Strut Mount for Passenger Car Chassis

Nov 03, 2015

- Lightweight variant with fiberglass-reinforced polyamide 25 percent lighter than aluminum design - Enhanced ride comfort thanks to highly insulating rubber element AUBURN HILLS, Mich. - ContiTech Vibration Control - the strut mount specialist based in Hanover, Germany - has developed a strut mount in which fiberglass-reinforced BASF Ultramid polyamide is also used as the primary structural... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Omni-Directional Antenna suits in-building wireless networks.

Nov 03, 2015

With PIM rating of less than -150 dBc and coverage from 700–2,700 MHz, HyperLink® HG72705CUPR-NF supports cellular 4G/LTE, Personal Communication Services, and Wi-Fi 802.11b/g wireless networks. Unit can be mounted through single 11/16 in. hole in solid or suspended ceiling that is up to 1 in. thick. Antenna features single 15.7 in. coax lead terminated with N-Female connector. Single-feed... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Seginus Inc. is Pleased to Introduce the 9DBA30H808-03PNEH Electrical Connector

Nov 03, 2015

The 9DBA30H08-03PNEH electrical connector is eligible for installation on Various ATR Aircraft Starter Generators. Embraer Model Eligibility: ATR42 ATR72 For more specific model eligibility details, please see the supplements section of our website. For sales information, please contact your regional distributor or our USA offices. OEM Part Numbers: 9DBA30H08-03 PMA Part Numbers: 9DBA30H08-03EH... Read More

Electrical Equipment & Systems, Material Handling & Storage, Mounting & Attaching Products, Test & Measuring Instruments

How Sensor Accessories Will Improve Your System

Nov 02, 2015

Locon Sensor Systems helps companies in a wide range of industries integrate sensors that best suit their applications. From businesses that need sensors to perform in the harshest of environments, to projects requiring a custom fit, Locon Sensor Systems can provide your business with nearly any type of solution. In fact, Locon Sensor Systems' engineering and sales team works closely with... Read More

Mounting & Attaching Products

Sierra Nevada Brewery Calls on Banker Wire Mesh to Accent New Taproom

Nov 02, 2015

Mills River Taproom and Restaurant Dubbed a 'Showpiece' for Brewery MUKWONAGO, WI – With design accents from Banker Wire, Sierra Nevada Brewing Company recently opened its much anticipated Mills River Taproom and Restaurant in Mills River, North Carolina. The taproom features 23 beer taps and a chef-inspired menu with beautiful interior elements parallel in appeal.  Banker Wire... Read More

Mechanical Power Transmission, Mounting & Attaching Products

Multi-Axis Piezo-Motor Positioners: Ultra-Compact, Stackable Linear and Rotary Stages by PI

Oct 29, 2015

Auburn, MA - Precision positioning systems industry leader PI (Physik Instrumente) L.P. presents miniaturized, multi-axis linear and rotary positioners. With 50 models in the Q-Motion piezo motor family, PI‘s minute stages represent varying sizes and motion ranges. So Many Solutions, Standard / Custom While open loop designs are more economical for applications where the absolute position does... Read More

Controls & Controllers, Electrical Equipment & Systems, Mounting & Attaching Products

Migration Platform updates legacy DCS systems.

Oct 28, 2015

Available for all legacy Honeywell IPC-620 DCS systems, Universal Conversion/Migration Platform permits existing field wiring to remain in place and undisturbed on front panel adapter, eliminating need to wire-trace or ring-out. System includes 2 versions of card adapter, 12- and 22-points, with connecting cable of either flying leads or pre-wired field connectors. All components are... Read More

Fasteners & Hardware, Mounting & Attaching Products

Hitch Adapter accepts Cat I attachments.

Oct 26, 2015

With Quick Hitch Adapter, operators can use Cat I non-PTO powered implements on skid steers. Hitch features lower hooks designed to capture and retain 7/8 in. lift pins without use of bushings, adjustable top hook for attaching to implements of varying heights, and floating top link bracket for implements that will not accept top link hook. Adapter is suitable for mounting box scrapers,... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

American Electrical Publishes New Video about how to Properly Size and Install a Cable Grip

Oct 22, 2015

Tom McCormick, President and CEO of American Electrical, Inc. explains how to properly size and install a cable grip.  American Electrical offers three types of thread choices  NPT, Metric and PG.  The next decision in sizing a cable grip is to determine the cable diameter - once this is done a cable grip can be chosen and installed easily to provide protection against water and material... Read More

Controls & Controllers, Health, Medical, & Dental Supplies and Equipment, Mounting & Attaching Products

CIVCO will Launch Exclusive Partnerships at 2015 ASTRO Meeting in San Antonio

Oct 21, 2015

CORALVILLE, Iowa – ASTRO Booth #1047 - CIVCO Medical Solutions, the leading provider of comprehensive motion management solutions for radiation oncology, will introduce its new exclusive partnerships with Sentient and Pearltec AG along with new innovative solutions to attendees of the American Society for Radiation Oncology (ASTRO) Annual Meeting in San Antonio, Texas, Oct. 18-21. New... Read More

Electronic Components & Devices, Mounting & Attaching Products

USB 3.1 Type C Plugs and Sockets help shrink PCB footprints.

Oct 14, 2015

With bi-directional power capability and support for USB-1 standards with 10 Gbps top speed and up to 20 V (100 W), 3 A output, USB 3.1 Type C interconnects help accelerate data transfer, increase power transmission, and minimize PCB footprints. For circuit board socket use, USB-C receptacle (Cat No. 953) offers hybrid mount configuration. For standard or custom USB-C cable assemblies,... Read More

Electronic Components & Devices, Mounting & Attaching Products

Compression Connector offers 28+ Gbps transmission speed.

Oct 13, 2015

With 1.22 mm profile, IT11 Series single-mold compression connector provides second source for cStack™ and cLGA® products from Amphenol Intercon Systems. Signal integrity is optimized with 6 x 25 pin grid configuration, and standard 150- and 210-position versions have respective contact pitches of 1 and 1.27 mm. Custom positions are also available with pin counts up to 3,000+. Design uses... Read More

Material Handling & Storage, Mechanical Power Transmission, Mounting & Attaching Products

Support and Actuator System works in ultra-high vacuum conditions.

Oct 12, 2015

Optimized for load capacity and stiffness, mechanical systems employ strut-based mounting system that minimizes vibration and allows facilitated and precise (sub millimeter) position adjustment of hardware without adding stress or distortion. Strut mechanical positioner has up to 6 degrees of freedom: translational (X/Y/Z) and angular (pitch, roll, and yaw). While smallest design supports 200... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Mechanical Connectors feature anti-turn design.

Oct 09, 2015

With anti-rotation feature, Type ATTA and ATAU Connectors minimize risk of movement at installation. Connectors are manufactured from high strength aluminum alloy and are suitable for use with copper or aluminum conductor. Units feature chamfered wire entry that facilitates conductor insertion. UL Listed and CSA Certified, connectors are available in 1- or 2-wire port design with various hex size... Read More

Agricultural and Farming Products, Construction Equipment and Supplies, Material Handling & Storage, Materials & Material Processing, Mounting & Attaching Products

Weld-On Plate enhances John Deere 500 Series loader functionality.

Oct 09, 2015

Measuring 49.38 x 22.85 in., John Deere 500 Series Weld-on Plate is formed from 5/16” steel, designed to be welded to existing attachments, and interfaces with John Deere 500 Series loaders that use JD attaching system. Features, including steel cast upper hooks and welded locking pins spaced to OEM specifications, ensure proper fit when welded to buckets or attachments. Read More