Mounting & Attaching Products

Electrical Equipment & Systems, Mounting & Attaching Products

Cord Grips connect and seal.

Jan 22, 2002

Tuff-Seal strain-relief cord connectors, liquid tight connectors and watertight conduit hubs are available in six different materials of construction: diecast zinc for residential and commercial applications; aluminum for general industrial facilities; nylon for environments with high moisture content; steel for durability in tough environments; valox for use in washdowns; and stainless steel,... Read More

Mounting & Attaching Products

EMI-Shielding Gasket holds up in severe environments.

Jan 21, 2002

Form-in-place Cho-Form® 5541 is galvanic-corrosion resistant and provides electrical stability in environments such as urban gas, salt fog, and high temperatures, as well as in high temperature/high humidity cycling. Single-component, electrically conductive, silicone elastomer contains nickel-plated graphite particles. Gasket material provides shielding effectiveness above 70 dB, from 200 MHz... Read More

Mounting & Attaching Products, Optics & Photonics, Robotics, Vision Systems

Pan/Tilt Mechanism is digital servo controlled.

Jan 14, 2002

PT-HP-S2 is designed for ENG and CCD cameras with digital drive lenses. It is controlled via RS-232 or RS-422 protocol with direct lens and camera interface connectors for control functions. Manual smooth motion is accomplished using velocity servo controls, along with convergent pan, tilt, zoom and focus presets. PT-HP-S2 incorporates heavy duty cross roller bearings and Swiss DC motors with... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Cable and Piping Support is used in air handling spaces.

Jan 07, 2002

Plenum Pier(TM) consists of block of white, closed-cell ETHAFOAM(TM) polyethylene foam, which absorbs vibrations and shock and accommodates expansion and contraction of piping. It has been tested and meets UL 2043 requirements for air handling spaces. Yellow chromate ERISTRUT channel is bonded into block of foam, permitting use of standard strut clamps and accessories. Plenum Pier is suitable for... Read More

Mounting & Attaching Products

Connectors and Adapters meet FCC Part 15 regulations.

Jan 04, 2002

TNC males with reverse threads include RT-1202-C crimp connector for RG-58/U cable and RT-1227 reverse thread TNC male to reverse thread TNC female right angle adapter. Reverse thread SMA females include RT-1142 adapter with reverse threaded SMA female on one end and standard BNC female on other end. Nickel plated RT-1005-C reverse thread N male crimp connector is for RG-58/U and gold plated... Read More

Machinery & Machining Tools, Mounting & Attaching Products

Locking Kits fit Haas machining centers.

Jan 03, 2002

Ball Lock(TM) fixture kits contain all components needed to locate and lock fixture plates to subplates. System provides quick change capability, and holds plates together with working loads up to 20,000 lbs. Standard kit includes correctly-sized subplate and fixture plate, both pre-drilled with ball lock bushings installed and correct number of shanks, T-slot nuts, sine fixture keys, and socket... Read More

Mounting & Attaching Products, Packaging Products & Equipment, Test & Measuring Instruments

Plugs and Connectors identify power status.

Jan 02, 2002

Power Light(TM) (PL) Plugs and Connectors glow through transparent lenses when power is ON. When devices are de-energized, and current is no longer present, power light switches OFF. Units are available in 15, 20 and 30 Amp 125 Volt straight-blade and locking configurations. 15 and 20 Amp straight-blade versions feature green neon bulb rated at 30,000 hours. 20 and 30 Amp locking devices feature... Read More

Electronic Components & Devices, Mounting & Attaching Products

Coaxial Connectors feature DC to 40 GHz performance.

Jan 02, 2002

2.92mm coaxial connectors provide high repeatability, and are compatible with K, SMA, and 3.5mm series connectors. They are designed for demanding applications at -55° to 125° C temperatures. Featuring type 303 stainless steel bodies and gold plated BeCu contacts, they require 8 to 10 in-lbs. coupling nut tightening torque, and are rated for >500 matings. 50 Ohm coaxial connectors have 750... Read More

Mounting & Attaching Products

Modular Jack fits on printed circuit board.

Jan 02, 2002

CAT5 modular RJ45 jack can be used in high-speed networking and communication applications such as Ethernet, LANs, hubs, and routers. Jack is made of gray PBT thermoplastic, has standard contacts that are gold flash or plated with 50µ" gold, and is fully shielded to reduce EMI/RFI. Slim profile allows for positioning flexibility on PC board. Total height of the connector is 0.650 in. Read More

Mounting & Attaching Products

Motor Flanges facilitate installation.

Dec 27, 2001

PF01 Linear Motor Flanges have integrated fans that provides forced air cooling. Flanges help facilitate installation of motors, and provide mechanical support and thermal conductivity. They can be screwed straight onto support, or mounted with T-slot. Clamping plate allows changing of linear motors without dismantling flanges. Longer flanges provide better cooling of linear motors. Read More

Mounting & Attaching Products

Bus Connectors fit DeviceNet, Honeywell and Seriplex networks.

Dec 18, 2001

Tuff-Link Bus System connectors work in industrial environments including IP 67 washdowns. Family includes connectors, cable assemblies, receptacles, molded tees, terminators and several types of multi-port junction boxes, all of which meet NEMA, IEC, UL & CSA standards. Connectors have gold-plated contacts machined from solid brass, tees and terminators molded from PVC, anodized aluminum panel... Read More

Mounting & Attaching Products

Machinery Mounts control equipment vibration.

Dec 18, 2001

Industrial Shockmounts control shock and structural noise transmission associated with heavy industrial machinery. Lattice mounts are for low frequencies applications such as with air compressors, large engines and generators, and rubber mills. Chan-L mounts are suited for frequencies of at least 600 cpm, and protect against metal-to-metal bottoming. Leveling mounts have neoprene elastomer for... Read More

Material Handling & Storage, Mounting & Attaching Products

Board Stackers offer design flexibility.

Dec 11, 2001

On .100 in. pitch, single, double and triple row through-hole headers (MTSW Series) and stackers (ZW Series), surface mount board stackers (HW Series) and shrouded headers (ZSS Series) are available for board stacking. For micro pitch, board stackers are available on .8mm pitch (AW Series), 1mm pitch (MW Series), .050 in. pitch (FW Series), .050 in. x .100 in. pitch (DWM Series) and 2mm pitch (TW... Read More

Mounting & Attaching Products

Isolator Ring obtains accurate pressure measurements.

Dec 11, 2001

For measuring pressure of slurries, abrasives and hard-to-handle materials, isolator ring supports up to three gauges, pressure switches and transmitters. It is vacuum-filled with high-viscosity silicone fluid and permanently sealed. Gauges can be removed, replaced, or hand-rotated without interrupting process. No tools are required to change pressure instruments, which can be removed and... Read More

Mounting & Attaching Products

Dual Durometer Hinge is made from PVC leaves.

Dec 11, 2001

DDH has co-extrusion comprising 2 rigid PVC leaves connected by strong flexible polyurethane elastomer. It can be provided with double sided tape and/or punched with mounting holes for fasteners such as rivets and screws. Polyurethane elastomer forms tough bond between rigid PVC leaves and provides flexibility and springback that will give hinge long service life. Leaves can be extruded in custom... Read More

Mounting & Attaching Products

Cable Ties hold down wire bundles and cables.

Dec 11, 2001

Kwik Wrap has cross on head that allows ties to be permanently mounted with screw or rivet. White labeling area allows bundles and cables to be identified. Wraps are made from industrial hook and loop materials, are releasable and reusable, and will not allow over-cinching of material. Ties are suitable for bundling fiber optic cables. Read More

Mounting & Attaching Products

Ultrasonic Positioner measures travel of valve blade.

Dec 05, 2001

EP 2000 compares valve position to valve control signal, and provides valve open, valve closed, positioner start, positioner stop, and valve blade not in position indications. It works with 4 to 20 mA signal from DCS system, where at 4 mA signal valve is completely closed, at 20 mA completely open. Probe can also be trained to use 4 to 20 mA signal for partially opening and closing valve. Read More

Mounting & Attaching Products

Interconnects are available with 10 to 100 I/Os.

Dec 04, 2001

TFM and SFM Series .050 in. pitch interconnects are designed for applications requiring blind mating and/or high number of mating cycles. They are available with board spacings from .236 to 1.472 in. Three-finger Tiger-Eye contacts in SFM Series are stamped and formed with soft Beryllium Copper and heat-treated to optimize spring properties. Tiger Eye LITE three-finger contact is also available... Read More

Mounting & Attaching Products

Nylon Plastic Hinges can replace steel hinges.

Nov 28, 2001

Available in countersunk thru hole, tapped insert, or threaded stud versions, these hinges can be substituted for metal hinges. Constructed from reinforced nylon plastic with black matte finish, they have stainless steel hinge pins. Tapped insert is made from brass, and threaded stud is steel and zinc-plated. Both are molded in. Read More

Mounting & Attaching Products

Audio Jacks are available with 4, 5 or 6 conductors.

Nov 28, 2001

Suitable for portable devices, information technology applications, and small products requiring additional signals for sensing or control, these audio jacks provide additional conductors in small package size. Both 2.5mm and 3.5mm input sizes are available in thru-hole and surface mount options. All have minimum life of 5,000 cycles and are made from UL94VO materials. Read More