Mounting & Attaching Products

Adhesives & Sealants, Fluid & Gas Flow Equipment, Mounting & Attaching Products

Gasketing/Sealing Material comes in various ratings.

February 27, 2002

Gasketing and Sealing Line includes UL listed clip-on compression gaskets made of EPDM with NEMA 4 sealing and UV resistance; UL 94 flame retardant clip-on compression profiles with NEMA 4 sealing capability; and EMC conductive coated clip-on EPDM gasket profiles. UL 94 flame retardant neoprene closed-cell sealing tape is available with adhesive backing and internal cross-threading for... Read More

Mechanical Power Transmission, Mounting & Attaching Products

Data-line Protectors operate beyond CAT 5 requirements.

February 27, 2002

Data-line Protectors offer full 20,000 watts of protection compared to industry norm of 1,500 watts. Units are tested repeatedly with 8/20 micro waveform at 6kV/3kA, without failure. Peak voltage seen at output is 33.2 V. Read More

Mounting & Attaching Products

Locking Plugs and Connectors have impact-resistant housings.

February 27, 2002

Rated at 50 ampere, California style locking plugs and connectors come in nylon Safety Grip(TM), nylon AutoGrip(TM), and all-metal Armored housing styles, with configurations from 125 VAC to 480 VAC. UL-listed and CSA-approved, Nylon Autogrip clamps firmly on inserted cord. Nylon plugs are glass-filled with choice of gripping and construction. Construction consists of rolled stainless steel and... Read More

Mounting & Attaching Products

Receptacles support SCSI and FC-AL systems.

February 27, 2002

SCA-2 receptacles consist of staggered contact heights which enable hot-plugging. Alignment guides at both ends house grounding contacts and allow blindmateability. SCA-2 receptacles are installed on backplane to mate directly with SCA-2 plugs installed on disk drive. Tail configurations include through-hole pin and press-fit compliant pin. 80-pin receptacle supports SCSI-3 protocol, while 40-pin... Read More

Material Handling & Storage, Mounting & Attaching Products

Rollers And Bumpers include additional sizes.

February 27, 2002

Solid, finned, and DuraSoft(R) rollers are available with diameters from 1-1/2 to 4 in. diameter and widths of 1, 1-1/4, and 2 in. They come in black neoprene, white nitrile, or polyurethane in durometers from 20 to 95. They also offer standard bearing, precision bearing, shaft drive, and brake roll-clutch bearing mountings. Square and rectangular bumpers are available in black neoprene and... Read More

Mounting & Attaching Products

Foam Grips last in harsh environments.

February 27, 2002

Durablend foam grips are formulated with blend of CPE and EPDM, making them resistant to sunlight, water, oil and gas. Foam combines soft, ergonomic qualities of most foams with durability typically found in solid rubber grips. It is available in 3 densities with either smooth or textured surfaces. Read More

Mounting & Attaching Products

Power Grip Connectors meet ANSI C119.4 specs.

February 20, 2002

UTILCO Power Grip Hot Line Connectors for high current overhead and equipment tap applications have direct drive eyebolt that is in line with V shaped jaw, creating mechanical wedge that assures constant 3-point loading on connection. Grooves in jaw serve to remove cable oxidation, thus improving integrity of connection as it is being installed. Power Grips accommodate multiple sizes of... Read More

Mounting & Attaching Products, Sensors Monitors & Transducers, Test & Measuring Instruments

Encoders are available with connectors.

February 13, 2002

Accu-Coder(TM) Cube Series and model 702, 725, 758, and 225 encoders are available with Eurofast connector. Connector allows user to reduce stocking requirements for cord sets and similar components since cords can be used for encoder connections and other components of motion control systems (such as proximity sensors and photoelectric switches). Read More

Mounting & Attaching Products

RF Edgeboard Connector accepts RG59 or RG6 cables.

February 12, 2002

F Type V-Bite(TM) RF edgeboard connector offers up to -40.3 dB return loss at 2.3 GHz. 75 ohm connector is engineered for signal integrity in RF applications, and snaps and locks into place for secure PCB retention during hand or re-flow soldering. It is supported both above and below board to minimize stress on solder area. Manufactured of machined brass, and employing straight-through contact... Read More

Electronic Components & Devices, Mounting & Attaching Products

PCB Interfaces provides up to 300 I/Os per connector.

February 12, 2002

FleXYZ interfaces provide flexibility in X, Y, and Z axes by specifying number of rows, pins per row, and desired board spacing with standard interconnects. YTT Series headers and YTW Series board stackers mate with YTQ and YTS Series sockets to provide board spacings from 0.329 to 1.165 in. By using YTE Series elevated socket, board spacing can be increased to 1.705 in. Interconnects have 4-6... Read More

Mounting & Attaching Products

Bellow Couplings assemble onto existing equipment.

February 12, 2002

BK2 series couplings are made with split hub and stainless steel bellow. Hub allows user to assemble coupling on existing equipment where shaft ends cannot be moved. Stainless steel bellow has high torsional rigidity with zero backlash; can compensate for axial, angular, and lateral misalignment simultaneously; and has low moment of inertia. Shaft hubs are bored for shaft diameters from 0.12 to... Read More

Mechanical Power Transmission, Mounting & Attaching Products

Network Protector has 4-position circuit breaker.

February 12, 2002

CM52 is UL-qualified, and handles ratings from 800 to 6200 A, 216 to 600 V. It offers electrically operated, composite case, spring-closed, draw-out, dead-front air network circuit breaker controlled by MPCV network relay. CM52 meets or exceeds standards in IEEE C57.1244. Color-coded wiring and front accessible test switch allow for troubleshooting, and diagnostics are built into its Voltage... Read More

Material Handling & Storage, Mounting & Attaching Products, Safety & Security Equipment

Damping Material stops noise and vibration in equipment.

February 5, 2002

ISODAMP® C-1000 Series thermoplastics, highly damped vinyl materials provide vibration isolation, shock protection and noise control. Three formulations are available as standard and custom-molded isolators. Materials exhibit extremely low amplification at resonance and quick return to system equilibrium after shock or vibration input. ISODAMP C-1002 performs in range from 13 to 41 deg C;... Read More

Mounting & Attaching Products

USB Port connects multiple peripherals.

February 5, 2002

Type AJT01G USB port can be used to connect up to 127 peripheral devices such as mice, modems, and keyboards. It also supports Plug-and-Play installation and hot plugging. Read More

Mounting & Attaching Products

Optical Positioning System controls material handling vehicles.

January 30, 2002

ICS 5000 controls most industrial vehicles, such as overhead and AS/RS cranes, in warehouse, manufacturing, and storage facilities. It uses infrared distance measuring technology and microprocessor-based control system to reduce move times by 30 to 50% compared to other positioning systems. Final positioning is accurate, with system decelerating vehicle to desired destination without hunting or... Read More

Mounting & Attaching Products

Soft Shell Connectors are available in 2 to 12 positions.

January 29, 2002

Micro MATE-N-LOK 3mm-pitch connectors have dual-beam contacts for improved mating area, and high temperature housings for IR processing. Single row contacts on 3mm centerlines accommodate installations where thin, tight connectors capable of handling up to 5 A are required. Units can provide power and signal I/O and power interface interconnections. Read More

Mounting & Attaching Products

Interconnects combine differential and single ended systems.

January 28, 2002

Q-Pair high speed interconnects in differential pair configurations allow electrical performance at up to 5GHz operating frequencies. Connectors can be partitioned to include both differential pair and single-ended signal pins, allowing board designer to optimize system for high speed where required, while minimizing impact on density. Read More

Mounting & Attaching Products

Connectors meet IEEE 1394 standards.

January 22, 2002

4pin IEEE 1394 connectors operate at speeds up to 400 Mbps. Through-hole connectors, available for use with 0.8 and 1.6 mm thick PC boards, are made of black PBT thermoplastic, and feature indented metal pegs for PCB retention. SMT connectors are made of black PA6T high temperature plastic, and have enlarged solder tabs for PCB retention. Both styles are shielded to control EMI/RFI, and have gold... Read More

Computer Hardware & Peripherals, Mounting & Attaching Products

I/O System uses standard M12 plug connections.

January 22, 2002

EASi/oN Modular Field Bus I/O system provides tool-free means to connect peripherals and other components. It combines plug-in bridging blocks, power feed, field bus connection, and connecting cables, along with integrated module catches and standard DIN rail mounting. System permits complete I/O systems to be removed from circuit without removal of other field bus subscribers. EASi/oN works with... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Cord Grips connect and seal.

January 22, 2002

Tuff-Seal strain-relief cord connectors, liquid tight connectors and watertight conduit hubs are available in six different materials of construction: diecast zinc for residential and commercial applications; aluminum for general industrial facilities; nylon for environments with high moisture content; steel for durability in tough environments; valox for use in washdowns; and stainless steel,... Read More