Mounting & Attaching Products

Material Handling & Storage, Mechanical Power Transmission, Mounting & Attaching Products, Optics & Photonics

Motorized Vertical Elevator Stage provides precise positioning.

March 1, 2016

Constructed of black-anodized aluminum alloy, AZ60-A non-cantilevered moving wedge vertical elevator stage supports up to 15.43 lb loads without loss of parallelism. Dimensions are 183.7 x 80 x 38 mm (~42 mm when raised), 60 x 95 mm drilled and tapped stage has 4 mm vertical travel, and travel speeds reach 2.5 mm/sec. Design provides smooth, straight (to <5 µm), vertical motion... Read More

Machinery & Machining Tools, Materials & Material Processing, Mounting & Attaching Products, Printing & Duplicating Equipment, Thermal & Heating Equipment

Juki to Display High-Volume Production Equipment at APEX

February 22, 2016

MORRISVILLE, NC – Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and part of Juki Automation Systems Corporation, today announced that it will exhibit in Booth #763 at the 2016 IPC APEX EXPO, scheduled to take place March 15-17, 2016 at the Las Vegas Convention Center. Juki will display a high-mix line along with several updated... Read More

Green & Clean, Mounting & Attaching Products, Transportation Industry Products

Aluminum Bumper features stainless steel finish.

February 22, 2016

Available for International® HX Series trucks, AERO CLAD® offers bright metal bumper option for both set back axle and set forward axle models. Stainless steel finish is 10x thicker than chrome plating and provides mirror bright surface that resists corrosion, even after damage from impact. Tough finish will not crack, peel, rust, or fade. Saving 52 lb compared to standard painted... Read More

Electrical Equipment & Systems, Material Handling & Storage, Mounting & Attaching Products

Large Canadian Nuclear Power Plant Uses Silflex Magnetic Shielding System

February 19, 2016

Marshield Radiation Shielding is proud to have recently supplied 1'x2'x0.5" Silflex premium magnetic shielding sheets to a large Canadian nuclear power plant. The sheets are being used as a replacement to existing lead blankets which have proven to be difficult to attach to the source. These magnetic radiation shielding sheets are adding to the shielding in flasks used for a single fuel... Read More

Health, Medical, & Dental Supplies and Equipment, Mounting & Attaching Products

Needleless Injection Site has non-disconnect male luer lock.

February 18, 2016

Made of COC (cyclic olefin copolymer) external body, polycarbonate internal body, and latex-free silicone valve, needleless injection site (No. 91600) is EtO and Gamma sterilization compatible. Non-disconnect male luer lock provides non-removable connection and thereby eliminates need for bonding. Also, connector features swabbable luer activated female luer lock for aspiration or... Read More

Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products, Robotics

Bottle Gripper Head Solutions from ANVER Corp. Address Demanding Manufacturing Challenges

February 15, 2016

Pneumatic-Powered Bottling Pick-Up Grab Heads for Use with Major Lines of New or Replacement Bottling Machinery Hudson, MA – ANVER Corporation, a leader in vacuum handling technology, announces its line of pneumatic-powered bottling pick-up heads for robotic and automation equipment, utilizing inflatable bladders and pneumatically actuated mechanical grippers to gently grasp bottles from the... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Orbel and Nolato Experts Partnering to Showcase Custom EMI/RFI Solutions at IMS 2016

February 12, 2016

Two great brands, one convenient solution. EMI/RFI specialists will be available for consultations in rapid prototyping, effective adaption to changes in operating environment, and advanced project management. Easton, PA — Orbel Corporation, designer and manufacturer of custom EMI/RFI shielding, photo-etched precision metal parts and stamping; and Nolato, developer of EMC and thermal management... Read More

Material Handling & Storage, Mounting & Attaching Products

Indexable Head System offers 2 reaming shank designs.

February 9, 2016

To optimize high-precision reaming, modular Precimaster Plus™ is available with floating and adjustable shank designs. Intended for static applications, PMX-FL shank has mechanical built-in floating system that provides high stability. PMX-AD shank for rotating applications has mechanical internal adjustment feature that uses 6 screws to provide precise settings and effectively correct spindle... Read More

Mounting & Attaching Products

Methods for Cutting Large Gaskets Save Money and Increase Material Yield

February 9, 2016

Large gaskets are used in a wide variety of applications such as outdoor lighting and electronic equipment enclosures. Because these large custom gaskets can use significant amounts of material, technical buyers need to find ways to control costs. For product designers, cost savings are important, too. Precision die cutting from Interstate Specialty Products increases material yield, saving you... Read More

Mounting & Attaching Products, Sensors Monitors & Transducers

Retractable Sensor Assemblies eliminate process interruption.

February 4, 2016

With Cleanfit CPA875 and CPA871 sensor assemblies, pH, ORP, oxygen, and NIR sensors can be installed or removed during operation. By moving sensor from measuring position to service position, retractable assemblies allow sensor to be cleaned, calibrated, or replaced without interrupting process. Cleanfit CPA875 is intended for use in food, pharmaceutical, life sciences, and specialty chemical... Read More

Mounting & Attaching Products

Seginus Inc. is Pleased to Introduce R25-2-2007-1EH Gasket

February 4, 2016

The Gasket P/N R25-2-2007-1 is part of the Anti-Collision Light used on ATR42 and ATR72 series aircraft. The Anti-Collision Light is used to aid in aircraft recognition during ground and flight operations. The Anti-Collision Light is assembled from components such as Cap Assembly, Base Assembly, Gaskets, a Lamp assembly, and a transformer and connector assembly. Seginus Inc. has released the... Read More

Mounting & Attaching Products

Gasket Material withstands high temperature and pressure.

February 4, 2016

Able to withstand temperature up to 925°F and pressure up to 2,000 psi, Durlon® 8900 has been thoroughly tested, passing API 607, 6th Edition Fire Test with zero leakage. Premium-grade, compressed non-asbestos gasket material contains high-strength fibers and graphite fillers bonded with nitrile synthetic rubber. Rubber level is optimized to obtain flexible sheet with good cutting... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

SCHURTER to Showcase Innovative Medical Protection Class II Products at MD&M West 2016

February 4, 2016

Santa Rosa, California — MD and M West 2016 also known as Medical Design Manufacturing West, will be held at the Anaheim Convention Center on February 9th through 11th.  SCHURTER will be there demonstrating its high performance AC connectors, switches and circuit protection products that safely and reliably optimize equipment performance.  Our featured product this year will be the KMF... Read More

Mounting & Attaching Products

Seginus Inc. is Pleased to Introduce 9200-116-0EH, O-Ring

February 3, 2016

The O-Ring P/N 9200-116-0 described here is a part of the Electrical Magnetic Detector used in CFM56-5B, 5C aircraft engines. CFM56-5B engines are used in all models of Airbus A320 family and CFM56-5C engines power Airbus’ long-range A340-200 and -300 airliners. The Electrical Magnetic Detector uses a magnet to catch ferromagnetic metal particles in suspension in the engine’s lubrication... Read More

Electrical Equipment & Systems, Mounting & Attaching Products

Rugged 10G-Base-T to XAUI Connector features 4 channels.

February 1, 2016

Built to survive military, aerospace, and industrial environments, 4-channel 10G-Base-T to XAUI connector facilitates bidirectional protocol conversion of IEEE 802.3 XAUI to IEEE 802.3 10G-Base-T. Split Pair Quadrax contacts support up to 6.5 Gbps signaling. Containing power supply, 2 dual-channel 10G-Base-T to XAUI PHYs, Ethernet transformers, clocking, and MDIO interface, connector... Read More

Controls & Controllers, Mounting & Attaching Products, Optics & Photonics

Digital Controller operates closed-loop nanopositioners.

February 1, 2016

Designed with small footprint for integration into OEM environments, LC.300 Piezo Controller operates closed-loop, flexure-guided nanopositioners, with smooth linear motion and nanometer precision. nPControl Basic Software offers ability to change PID control parameters and apply notch filters via Windows-based GUI. When combined with nPoint's line of nanopositioning stages, LC.300's... Read More

Controls & Controllers, Mounting & Attaching Products

New High-Speed Piezo Z-Stage and Digital Controller Value Packages for Microscopy / Metrology, Released by PI

February 1, 2016

Auburn, MA – Industry leader in motion and precision positioning components and systems PI (Physik Instrumente) L.P. has released several controller stage value packages for microscopy and metrology applications. These affordable systems consist of a PIFOC® high performance fast piezo focus mechanism and a compact digital servo controller. These outstanding packages deliver higher... Read More

Mounting & Attaching Products

Forged Rigging Hooks are rated for capacities up to 60 tons.

February 1, 2016

Supporting load ratings from 31 ½–60 tons, high-capacity rigging hooks are constructed with quenched and tempered material that maximizes strength while minimizing weight and size. Forged latch tab is pre-drilled for facilitated installation, and hooks' 5:1 design factor, same design factor as wire rope, eliminates need to downgrade. To help ensure safe and proper use, visibility of... Read More

Chemicals & Chemical Processing, Mounting & Attaching Products

Gasket Strainers an Easy Order on the Web at Equalseal.com

January 26, 2016

If you'd like to protect your expensive downstream equipment from dangerous in line system debris, consider this inexpensive solution: Equalseal Gasket Strainers. We take a 100% stainless steel mesh disc, put it between two flange gaskets and laminate the whole assembly together. The mesh filters out debris and reduces the chance of failures and damage to your most important equipment. The... Read More