Speed Reducers

Mechanical Power Transmission

Helical In-Line Reducers offer up to 18,587 lb-in. torque.

June 2, 2015

Combining LeCentric reducer with choice of Regal electric motors, Pre-assembled LeCentric GEAR+MOTOR™ Units are made of cast iron and are torque-rated from 5,974–18,587 lb-in. with max input of 1/3–40 hp. Units are available with ratios up to 680.03:1, with double and triple reduction designs and efficiencies as high as 97%. Utilizing wide range of removable bases and mounting hardware, reducers offer drop-in replacements for industry-standard configurations. Read More

Mechanical Power Transmission

Vertical Gear Reducer combines efficiency and compact deisgn.

March 25, 2015

Available in 6 sizes for vertical pump speeds from ~100 to 500 rpm, Baldor-Dodge® Vertical GearMotor is built on low-pole count induction motor platform utilizing Dodge planetary gearing. Torque ratings range from 550,000–7,000,000 lb-in., and approximate power ratings range from 750 to <25,000 hp. Solution provides alternative to low-speed, vertical pump drive technologies which utilize large, high-pole count vertical motors or combination of horizontal motor with right angle gear reducer. Read More

Mechanical Power Transmission

Precision Gear Reducers have compact, integrated design.

March 4, 2015

Maximizing torque-to-weight ratio and tilting rigidity, TwinSpin® G-series combines trochoidal gear arrangement with heavy-duty radial thrust bearing system each unit. This removes need for separate powertrain load support mechanics. Trochoidal gear contact profile provides ~50% simultaneous meshing, ensuring high torque transmission and backlash-free performance in precision motion control. There are 8 frame sizes with nominal ODs from 75–200 mm and rated torque from 34–950 Nm. Read More

Mechanical Power Transmission

Stainless Steel Gear Reducers have washdown-resistant design.

February 2, 2015

With sanitary design sealed against high-pressure, high-temperature, and caustic washdown environments, Ultra Kleen® Tigear-2® offers input ratings up to 5 hp and come in 5 case sizes. All-stainless steel construction includes laser-etched nameplate for permanent, sanitary product identification, and versions are available with solid or hollow output shafts. All models are factory-filled with H1 food grade synthetic lubrication and protected by 2-piece, harsh-duty output sealing system. Read More

Mechanical Power Transmission

Stainless Steel Gearbox withstands high pressure washing cycles.

August 20, 2014

Featuring smooth and rounded design that eliminates free-standing liquids to prevent bacteria growth, stainless steel worm reducer meets IP69K industry standards to withstand repetitive high pressure washing cycles without water ingress. Double-enveloping worm gearing promotes torque capacity and life, while non-fretting motor connection facilitates removal of motors – key issues in food processing market. There are 5 sizes available to cover ¼–7.5 hp motor range.
Read More

Mechanical Power Transmission

Right Angle Reducers feature stainless steel construction.

February 14, 2014

Available in sizes 38 and 48, both with integrated adapter and C-face input, Quantis Ultra Kleen RHB Reducers are manufactured using 316SS for corrosion resistance and feature smooth, rounded housing to minimize potential entrapment areas. Dodge XT harsh-duty 2-piece output seals offer protection against particulates and washdown sprays. Also made of all stainless, output shaft options include solid shaft, straight hollow, and Dodge Q-Loc keyless bushing system. Read More

Mechanical Power Transmission

Worm Gear Reducer remains leak-free for 18 months.

October 14, 2013

Along with roll-burnished journal finish that extends seal life, Morse Raider Plus features double-lip seals on input and output shafts. Computerized gear centering optimizes gear mesh for reduced heat and debris formation, while non-metallic quill liner reduces fretting and corrosion. Single-row ball bearings absorb radial and thrust loads on higher input speeds, and heavy-duty tapered roller bearings on all output shafts handle inherent gear load and provide max overhung load capacity. Read More

Mechanical Power Transmission

Gear Reducer is optimized for precision and torque handling.

March 1, 2013

Available for OEMs, Able VRB delivers precision and torque handling capabilities suited for packaging machinery, medical equipment, and assembly cell automation. Nominal output torque ranges from 238–13,276 lb-in., and backlash rating is less than 3 arc-min as standard. There are 6 basic sizes, available as single and double reduction units, which offer input range from 30–5,000 W, input speeds up to 6,000 rpm, and ratio range from 3:1 to 100:1. Standard mounting is through-bolt style. Read More

Mechanical Power Transmission

Precision Servo Gearboxes feature thread-in mounting style.

February 12, 2013

Offered in concentric shaft design with max 5 arc-min backlash rating, SureGear PGA Series is suitable for gantries, injection-molding machines, and conveyors. In-line planetary gear reducers are available in 4 gear ratios of 5, 10, 15, and 25:1. Mountable in any direction, maintenance-free units include helical-cut planetary gears for quiet operation and minimized vibration, and uncaged needle roller bearings that provide high rigidity and torque. Read More

Mechanical Power Transmission

Bevel Gearboxes feature 0.035-4.032 Nm torque capacity.

March 10, 2011

Bevel gearboxes are available in 3 sizes ranging from 34.925-63.5 mm OD with 1:1 torque ratio as standard. Integrated in green anodized aluminum housings, units have 303 stainless steel shafts, 2 sealed ball bearings/shaft, and an operating temperature of -20 to +80ºC. Maximum rotational speed for all versions is 2,000 rpm, and 3,000 rpm for units with hardened spiral bevels. Backlash figures vary from 1-0.5º for gearboxes with polished hardened steel gears and spiral bevels. Read More

Mechanical Power Transmission

Gear Reducers operate at 90% efficiency.

September 15, 2010

Utilizing helical-bevel gear technology, IronMan E Series offers direct replacement to traditional worm gear speed reducers. Four models are available with double reduction ratios from 7.8:1 to 60:1 and power capability to 8.50 hp. Triple reduction units are available by adding ratio multiplier. Available with shaft kits ranging from 1- 1½ in., units feature synthetic lubricant, cover sealed with O-rings, and Viton® double-lip seals. Read More

Mechanical Power Transmission

Planetary Reducers suit moving column and gantry machines.

October 6, 2009

Allowing for mounting on both sides of machine frame, KRPX rack and pinion planetary reducers are coupled with electrical preload system enabling zero backlash. System fits to machine frame with oversized screws, while setting is enabled by keyway machined on mounting surface and housing is manufactured of spheroidal graphite cast iron. Enabling accelerations up to 25 m/sec², products are offered in universal sizes of 2, 3, and 4, allowing respective pinion height of under 104, 127, and 148 mm. Read More

Mechanical Power Transmission

Planetary Gear Reducers suits servo and stepper motor use.

September 7, 2009

Available in both metric (50-118 mm) and NEMA (NEMA 17 to 42) output face, PE Series of planetary gear reducers offers maximum torque output from 10-135 Nm and reduction ratios from 3:1 to 1000:1. Ready-to-mount, lubricated for life series comes in 5 standard frame sizes, and requires no maintenance. Read More

Mechanical Power Transmission

Electromechanical Actuators come in various styles, sizes.

June 2, 2009

Offered in hollow shaft designs, FHA series miniature AC servo rotary actuators exhibit zero backlash and are optimized for accuracy, response time, and vacuum compatibility. Super-mini, high-powered RH series DC servo rotary actuators provide precision motion control and high torque capacity. Tach-generator and/or encoder are directly mounted onto motor shaft. Also available, LA Series compact linear actuators feature max thrust of 49 N and 0.0174 µm resolution. Read More

Mechanical Power Transmission

Worm Gear Speed Reducers feature maintenance-free design.

February 10, 2009

Available in single reduction ratios from 5 to 100:1 as well as double reductions, Blue Line Reducers feature aluminum heat sink that is adaptable and corrosion-resistant. Each unit starts as hollow output, with ability to add supplemental plug-in shaft, bolt-on output flange, or both to accommodate customer's requirements. Shaft-in, NEMA, and metric motor flange input styles are also available. Read More

Mechanical Power Transmission

Servo Reducers offer torque capacity to 90 Nm.

January 30, 2009

Suited for general automation or packaging machinery, Series S includes 5 sizes with speeds as high as 4,000 rpm. Right angle servo gear heads come with Conex gearing and are lubricated for life, vent-free. Output shaft connection has standard hollow bore and plug-in shafts to facilitate installation. Made of lightweight aluminum, reducers are suited for light-duty washdown applications. Read More

Mechanical Power Transmission

Worm Gear Reducers come in 5 sizes.

November 26, 2008

Available in quill and 3-piece coupled input, with solid or hollow output, Dodge ULTRA KLEEN Right Angle Reducers feature 316 stainless steel housing for washdown protection. Units come in 17, 21, 23, 26, and 30 sizes with center distances from 1.75-3.00 in. Totally enclosed ventless sealing system contains factory-filled H1 food-grade synthetic lubricant, eliminating routine oil changes. Reducers are protected by 2-piece harsh-duty output sealing system with lip seal and wave seal. Read More

Mechanical Power Transmission

Servo Motor Adapter facilitates mounting.

March 14, 2008

Featuring true double enveloping worm gear technology, Model HP provides output torque up to 19,160 lb-in. for single reduction unit. Device will fit any servo motor, and comes with multiple levels of backlash from 0-15 arc minutes, ensuring user has maximum options available for positional accuracy. Read More

Mechanical Power Transmission

Reducer is designed for high-torque applications.

March 3, 2008

Designed to meet or exceed AGMA and international standards, Dodge MagnaGear XTR is available with parallel shaft or right-angle configurations and torque capacities to 920,000 lb-in. Modular design allows for multiple mounting configurations and can be used with various soft start mechanisms. Constructed of heavy-duty cast iron, product features carburized, hardened, and precision ground gearing; Tandem HBNR lip seals; and power-matched components. Read More

Mechanical Power Transmission

Worm Gear Speed Reducer suits food and beverage industry.

February 9, 2008

Offering maximum corrosion resistance in caustic wash down environments, Stainless Steel 700 Series Worm Gear Speed Reducer comes with housings, motor flange, and carrier crafted from 316SS. Rounded housing design, plastic hardware covers, and 2-piece mounting base prevent particle accumulation or fluid pooling on or under unit. Large internal oil reservoir is filled with H1 food-grade lubricant and sealed for life, providing wide range of operating temperatures. Read More