Bodine Electric Co.
Chicago, IL 60618 4798
May 12, 2009 Pacesetter(TM) 230/460 Vac, 3-phase gearmotors and motors suit factories where various power supply options are present. In addition to range of torque, speed, and horsepower ratings, these CE- and RoHS-compliant products offer Quintsulation(TM) 5-stage insulation system that protects motor from potential spikes or corona damage caused by inverter. Frame motors 34R and 42R, available with dual-voltage windings and inverter-duty ratings, can be matched with type E, F, and 5N gearheads.

Maxon Precision Motors
Fall River, MA 02720
May 12, 2009 Designed for high speed medical applications of up to 90,000 rpm, EC Size 5 and EC 13 drives feature low-noise and low-vibration operation. Size 5 motor and gearhead measures ½ in. OD, with shaft of 0.125 in., and motor has servo mount. EC13/GP13 version has 13 mm OD, 3 mm shaft, and flange mount with 3 face side threads. Both models offer sterilizability of 500 autoclave cycles (typ) and are available equipped with Hall sensors or sensorless as well as with 3 different windings.

Bison Gear & Engineering Corp.
St. Charles, IL 60174
May 12, 2009 Available in 4 standard models, VWDIR104 AC Parallel Shaft Gearmotors are offered with either 1/10 or 1/15 hp (74.5 or 49.2 W) 115/230 V, 60/50 Hz single-phase permanent split capacitor electric motors. Integral gear reducers feature hardened steel helical and spur gearing, with ratios ranging from 108:1 to 266:1, and corresponding fixed output speeds from 15-6 rpm. Units feature built-in face mounting compatible with Genesis mounts and overhung load (OHL) capability up to 400 lb.

Midwest Motion Products
Watertown, MN 55388
Apr 21, 2009 Measuring 2.14 in. dia x 7.7 in. long with 12 mm dia x 25 mm long keyed output shaft, MMP-TM55-24VGP52-236 reversible gearmotor accepts any 24 Vdc source and can produce 238 lb-in. continuous torque at 20 rpm (443 lb-in. peak). Lightweight (3.5 lb) solution, available with motor windings for 12, 36, 48, 60, and 90 V, is rated IP54 and accommodates variable speed controls. It suits battery-powered electric vehicles, robotics, and automation applications.

New Scale Technologies
Victor, NY 14534
Apr 13, 2009 Featuring stainless steel housing, SQL-1.8-6-12-SS SQUIGGLE Motor measures 2.7 x 2.8 x 6 mm and mounts with tabs or adhesive. Unit features 6 mm travel range, 0.5 µm resolution, speeds greater than 7 mm/sec, and stall force of 30 g. With solid bottom surface, motor is suitable for integrating into high-volume miniature products, such as optical systems, medical devices, and micro-robotic instruments.

Mohawk Innovative Technology, Inc
Albany, NY 12205
Apr 09, 2009 Available in 5 models with rated speeds from 60,000-120,000 rpm, Variable Speed Synchronous and Asynchronous Motors feature maintenance-free operation by using foil gas bearings and either permanent magnet or induction motor elements. Korolon(TM) lubricious and wear-resistant bearing coating maximizes life for both intermittent start/stop and continuous operation. Applications include pumps, blowers, aerospace and aircraft equipment, and compressors.

Oriental Motor U.S.A. Corp.
Torrance, CA 90502
Apr 06, 2009 Featuring stator and rotor assembly techniques that minimize power loss in motor, AR Series utilizes AlphaStep closed loop control technology, rotor position sensor, and alarm signal to maintain positioning capability. Drivers accept AC/DC voltage input and come in 1.65, 2.36, and 3.35 in.² motor frame sizes, all available with standard shaft, 3 types of gearheads with various gear ratios, and/or electromagnetic brake. Depending on model, output torque ranges from 42 lb-in. to 530 lb-in.

Crouzet North America
Vista, CA 92081-8430
Mar 17, 2009 Through proportional control of gas flow, Linear Motor Series encourages energy-efficient gas heating control. Modulation of dispensed gas enables fuel to be burned at slower/faster rate as needed, promoting burning efficiency while minimizing expenditure and pollution. Packaged as integrated assembly with motor and valve, series also integrates dual safety system that lets motor switch off valve and stop gas flow in less than 10 ms and also spring back to close if power is lost.

B & R Industrial Automation Corp.
Roswell, GA 30076
Mar 04, 2009 With optimized torque ripple and stall torque between 0.8-2.5 Nm, 8JS three-phase synchronous motors have sinusoidal commutation with EnDat encoder or resolver as feedback unit. They directly divert lost power generated in stator to flange via housing, allowing regeneration of energy.

Toolmex Corp., Machinery Div.
Schaumburg, IL 60193
Mar 02, 2009 Featuring motor running at speed of 1,200 rpm, Elektrimax Design "D" oil well pump motors are suited for beam pumping units, punch presses, and applications demanding high slip and torque motor solutions. IP55 protected, dust and water resistant units have oversized regreasable bearings on both drive end and opposite drive end. Epoxy coated motors are rust and corrosion resistant, and are VPI process applied for optimal electrical performance.

Midwest Motion Products
Watertown, MN 55388
Feb 03, 2009 Accepting any 12 Vdc source, MMP-TM55-12V GP52-059 delivers 60 lb-in. continuous torque output at 78 rpm and 443 lb-in. peak output for battery-powered electric vehicles, robotics, and automation applications. Unit measures 7.75 in. long x 2.14 in. dia and has 25 mm long keyed output shaft with 12 mm dia. Weighing 4 lb, gearmotor features IP54 protection and is available with motor windings for 12, 36, 48, and 90 V. Supports for variable speed operation is also included.

Bison Gear & Engineering Corp.
St. Charles, IL 60174
Jan 27, 2009 Available with 1.25 in. ID hollow shaft or 1.25 in. dia solid shaft in u-shaped or s-shaped configuration, FlexTorq(TM) 762 series includes 9 standard models and offers output torques up to over 1,800 lb-in. Fixed output speeds on standard units ranges from 1.2-65 rpm, and matched variable speed drives can be provided for PMDC gearmotors. Products are driven by 1/20, ¼, or ½ hp permanent magnet, 90 Vdc, variable-speed motors.

Midwest Motion Products
Watertown, MN 55388
Jan 22, 2009 Accepting any 48 V DC source, Model MMP-TM55-48V GPk52-046 measures 2.14 in. dia by 7.2 in. long, and has keyed output shaft of 12 mm dia by 25 mm long. Unit weighs 3.5 lb, requires only 1.8 A at 48 Vdc to generate its full load torque, and provides 89 oz-in. peak torque. Rated at IP 54 protection level, compact unit suits battery powered electric vehicles, robotics, and automation applications. Motor windings for 12, 24, 36, 60, and 90 V are available.

Imperial Electric, A Kinetek Co.
Akron, OH 44306
Jan 19, 2009 Offering max lift capacity of 4,000 lb at 500 fpm with 2:1 roping, Model 478 is suited for high-passenger traffic areas in low-rise buildings. Motor, sheaves, and brake assemblies, integrated into one compact unit, reduce dimensional requirements. Capacity will accommodate larger car size, capable of transporting disabled patient, medical personnel, and life support equipment without restrictions. Brake torque is 1,400 lb-ft per shoe, and max sheave shaft load is 11,025 lb.

Midwest Motion Products
Watertown, MN 55388
Jan 08, 2009 Measuring 2.14 in. in dia and 7.75 in. long, Model No. MMP-TM55-24-12V GP52-079 has output rated for 80 in.-lb continuous torque, at 25 rpm, and 443 in.-lb peak. Weighing 4 lb, it has keyed output shaft of 12 mm dia and 25 mm long. Reversible unit requires just 3.6 A at 12 Vdc to generate its Full Load Torque. Available with motor windings for 24, 36, 48, 60, and 90 V, IP54 protection rated motor suits battery powered electric vehicles, robotics, and automation applications.

Remy International, Inc.
Pendleton, IN 46064
Jan 07, 2009 Designed without external solenoid, Delco Remy iMT9 Series is encapsulated to protect internal starter components when vehicles are operating in extreme conditions found in construction, mining, and military applications. Units crank up to 17 liter diesel engine and include rotatable mounting flange to facilitate installation. Available in 12 and 24 V, submersible motors operate from -25.6 to 248°F and can withstand 2,500 psi high-pressure water.

New Scale Technologies
Victor, NY 14534
Jan 05, 2009 Piezoelectric motor driver ASIC, NSD-1102 can drive one or two SQL-1.8 SQUIGGLE motors from single 2.8 to 5.5 Vdc supply. It includes on-chip dc-dc step-up converter and 4 half bridge drivers to create pairs of phase-shifted square waves with ultrasonic frequency to drive SQUIGGLE micro motors. Motor and drive circuit draw 100-900 mW when moving, depending on motor speed and load. On-chip registers store driver instructions.

Yaskawa Electric America, Inc.
Waukegan, IL 60085
Dec 23, 2008 Ranging from 140-6000 N of linear thrust and offered in over 24 coil configurations, Linear Sigma Series PMBL is offered for use with Sigma II digital servo amplifiers. Available in 2 product levels, level-I group provides wide array of linear motors with plug-and-play Sigma II servo amplifiers, while level-II group provides range of fully-integrated linear positioning slides with linear encoders and amplifiers as Ethernet-ready motion control system for general automation industry.

AutomationDirect.com
Cumming, GA 30040-9905
Dec 22, 2008 IronHorse(TM) general-purpose AC motors are offered in industrial-duty, cast-iron C-face style version with 1-300 hp and base speed of 1,800 rpm. Electrically reversible, TC frame TEFC motors feature ribbed cast iron frames to ensure maximum cooling. They are suited for conveyor, pump, fan, and textile processing applications.

ThinGap LLC
Ventura, CA 93003
Dec 22, 2008 Designed for industrial, professional, and portable tools, TGB1612 brush motor delivers 110 oz-in. peak torque and 170 W continuous power. It features smooth, controllable power due to its zero cogging and hysteresis torque, while low inductance coil allows current to respond quickly to sudden voltage swings. Unit measures 1.5 in. dia and 2.61 in. long.