Siemens Industry, Inc. Drives Technologies-Motion Control
Elk Grove Village, IL 60007
Nov 23, 2009 Model 1FT7 high-performance servomotors feature encoders up to 22-bit and vibration-insulated encoder mounting which allows user to exchange encoder in field in less than 5 min. They utilize DRIVE-CLiQ electronic nameplate and digital encoder interface, which simplifies start-up or replacement since drive automatically recognizes motor. Servomotors include forced ventilated and water-cooled types, as well as high dynamic design with very low rotor inertia.

Johnson Electric
New Territories   Hong Kong (prc)
Oct 27, 2009 Measuring 20 x 30 mm in size, Saia® UAL series of motors deliver constant positioning force up to 30 N over full travel distance of up to 15 mm, at speeds up to 4.16 mm/sec at 200 Hz. Removable bayonet-style flange aids in mounting. Available in unipolar or bipolar models, motors are suited for use in instrumentation, valve control, dispensing, metering pump, auger, and medical automation applications.

AMETEK Technical & Industrial Products
Kent, OH 44240
Oct 23, 2009 Suited for medical and industrial equipment as well as instrumentation and automation machinery, Models AB23000, AB34000, and AB48000 come in NEMA sizes 23, 34, and 56, respectively. Units provide continuous stall torque from 3.75-114 lb-in. and peak torque from 11.3-339 lb-in., depending on model. Featuring IP65 construction and heavy-duty 0.5 in. shaft, motors range from 2,800-5,200 rpm. Voltage rating up to 325 Vac for offline drives can be achieved.

Wittenstein, Inc. (formerly Alpha Gear Drives, Inc.)
Bartlett, IL 60103
Oct 09, 2009 Intended to serve motion market, Specialty Motors leverage dynamic brushless servo technology and precision mechanical components. Designs can address unique application requirements concerning form and function specific to medical, clean room, ultra-high vacuum, high/low temperature, and radioactive environments. Areas of use include traditional motion solutions in robotics, packaging, life science, and aerospace industries.

Oriental Motor U.S.A. Corp.
Torrance, CA 90502
Oct 07, 2009 Offering output torque from 3.2-35 lb-in., CRK Series 5-Phase Stepping Motors come in standard and high-resolution versions with resolutions up to 0.00288°/step and 0.00144°/step, respectively. Built-in RS-485 compatible controller packages allow for up to 16 axes to be controlled from one RS-485 Master controller. Five network communications rates up to 115,000 bps can be selected. Accepting 24 Vdc input, drivers/controllers match 0.79, 1.10, 1.65, and 2.36 in. sq. motor frame sizes.

Schneider Electric
Palatine, IL 60067-7399
Oct 01, 2009 Available in 3 book-size models, Lexium 32 Compact, Lexium 32 Advanced, and Lexium 32 Modular servo drives facilitate selection and adaptation to machine manufacturers' power and performance requirements. All Lexium 32 servo drives come with Safe Torque Off on board as per IEC/EN 61800-5-2. Units are complemented by medium-inertia Lexium BMH and low-inertia Lexium BSH motors, which cover torque range from 0.5-88 Nm.

Parker Hannifin Corp.
Oxford, MI 48371
Sep 15, 2009 Delivered as kits with separate stator and rotor elements, TK Series is directly integrated into mechanical structure of machine. Motors deliver continuous output torques from 100-7,000 Nm with nominal speeds to 1,000 rpm. Naturally ventilated or water cooled, units offer temperature resistance up to 150°C and immunity to lubricants. Since there are no wear-prone transmission elements such as gearboxes or worm gears, backlash and looseness are suppressed and lifetime is maximized.

Midwest Motion Products
Watertown, MN 55388
Aug 13, 2009 Accepting 24 Vdc power source, Model MMP-D22-376F-24V T-07 measures 2.25 in. diameter x 5.4 in. long with 0.25 in. diameter x 0.79 in. long output shaft. Mounting is accomplished with 4 face mount M5 threaded holes, equally spaced on 40 mm dia B.C. At 2,600 rpm, reversible servo motor delivers 35 oz-in. torque and 210 oz-in. peak torque. It requires 3.4 A at 24 Vdc to generate full load torque.

AMETEK Technical Industrial Products
Harleysville, PA 19438
Jul 24, 2009 Suited for commercial and light-industrial OEM applications, I Series motors are available in NEMA frame sizes 17, 23, 34, and 56 and in multiple lengths for each, offering performance capability from 40-1,700 W continuous. They can provide continuous stall torque from 1-58 lb-in. and peak torque from 3.1-174 lb-in., depending on model. Motors can be customized with gearing, optical encoders, holding brakes, cables, and unique features to meet specific application requirements.

Harmonic Drive, LLC
Peabody, MA 01960
Jun 02, 2009 Offered in hollow shaft designs, FHA series miniature AC servo rotary actuators exhibit zero backlash and are optimized for accuracy, response time, and vacuum compatibility. Super-mini, high-powered RH series DC servo rotary actuators provide precision motion control and high torque capacity. Tach-generator and/or encoder are directly mounted onto motor shaft. Also available, LA Series compact linear actuators feature max thrust of 49 N and 0.0174 µm resolution.

Arcus Technolgoy
Fremont, CA 94539
May 19, 2009 Integrating driver, controller, and Renishaw's AM256 magnetic encoder into back cap, Model DMX-K-SA-11 features 1.1 in. square form factor and is capable of full, ½, ¼, or 1/16 microsteps in 3 different stack sizes. Motor includes RS-485 communication with baud rate of 9,600-115 Kbps, trapezoidal acceleration profile control, 12-24 Vdc voltage input, and driver current from 100 mA to 1.5 A. Motor's 8-bit encoder chip provides non-contact angular position encoding over 360°.

AutomationDirect.com
Cumming, GA 30040-9905
Apr 14, 2009 Available in NEMA 17, 23, and 34 sizes, SureStep Stepping Motors include bi-polar models with output torques from 61-1,291 oz-in. Units feature pigtail cable with locking connector and 200 steps/revolution. Advanced Programmable SureStep Drives offer software-selectable resolution up to 51,200 steps/revolution and power capability up to 10 A/phase. Available for drives and motors, unregulated linear power supplies offer full load outputs of 32, 48, and 70 Vdc.

Oriental Motor U.S.A. Corp.
Torrance, CA 90502
Apr 06, 2009 Featuring stator and rotor assembly techniques that minimize power loss in motor, AR Series utilizes AlphaStep closed loop control technology, rotor position sensor, and alarm signal to maintain positioning capability. Drivers accept AC/DC voltage input and come in 1.65, 2.36, and 3.35 in.² motor frame sizes, all available with standard shaft, 3 types of gearheads with various gear ratios, and/or electromagnetic brake. Depending on model, output torque ranges from 42 lb-in. to 530 lb-in.

Danaher Motion/Portescap
Radford, VA 24141
Mar 16, 2009 Hollow shaft versions of h3 stepper motors allow wires or other media to be routed through motor shaft. With neodymium iron boron magnets to optimize torque density and bearing retainer/o-ring to help minimize motor noise, 1.8° step motors also feature aluminum housing for maximized heat dissipation and minimized power consumption. They are offered in NEMA 17, 23, and 34 frame sizes, with hollow shaft diameters of 4, 7, and 11 mm dia, respectively.

Custom Sensors & Technologies (CST)
Moorpark, CA 93021
Mar 13, 2009 Integrating motor and valve, Linear Motor Series provides proportional control of gas flow for energy-efficient gas heating. Synchronous model provides 10 mm displacement at 115 V, linear step speed of 0.833 or 1.67 mm/sec, and output force of 27-45 N. Featuring dual safety system, 2 stepper-based models incorporate -7.5° and -15° step angle, linear step displacement of 0.0167 and 0.033 mm/step, and output force of 38 or 58 N and 38 or 43 N, respectively. All provide linear travel of 10 mm.

Intelligent Motion Systems, Inc.
Marlborough, CT 06447-1334
Mar 05, 2009 NEMA size 23 brushless 1.8° stepping motor MDrive23Plus is available in 3 versions; microstepping with step and direction input, motion control with intelligent programmable controller, and speed control with velocity controller. Featuring extended operating range of -40 to +85°C and small footprint, product is available with various options to meet specific application requirements including encoders, planetary gearboxes, QuickStart Kits, and interface cables.

JVL USA/Motion Control Sales Ltd.
Morrow, OH 45152
Feb 27, 2009 Featuring modular design can be adapted to various applications, MAC integrated servo motor can incorporate Module MAC00-FB4 for completely cable-free and wireless control. Motor can be set-up and controlled over BlueTooth link via mobile phone or PC through module, which can be programmed via MacTalk software. Module also offers possibility for connection of local zero-set sensor and provides full access to all functions and registers in MAC motor.

JVL Industri Elektronik
Birkeroed DK-3460  Denmark
Feb 23, 2009 Offering 1.3 Nm up to 3,000 rpm for medium power range applications, modular MAC400 integrates driver, controller, encoder, and Hall sensor in splash-proof housing. It accepts operating commands from PC/PLC via RS232/422/485 as well as pulse/direction or quadrature inputs for electronic gearing. Along with A+B encoder output and 2-channel power dump circuit, features include velocity and torque control, positioning via digital interface, and software-controlled end-of-travel stops.

Intelligent Motion Systems, Inc.
Marlborough, CT 06447-1334
Feb 13, 2009 Suited for limited-space applications, MDrive14Plus products integrate NEMA size 14 brushless 1.8° stepping motor with electronics. Units are 2 in. high x 1.4 in. wide, with lengths of 2 in. for single motor or 3 in. for triple motor, which provides holding torque at 36 oz-in. Capable of full 256 x 200 microstepping with 12-48 Vdc integrated driver, MDrive14Plus systems feature extended operating range of -40 to +85°C and oversized input capacitors to minimize power line surges.

Astrosyn International Technology Ltd
Kent   United Kingdom
Feb 04, 2009 Model STM23 is size 23 motor and drive, contained in aluminum heatsink housing, with RS232/RS485 interfaces for programming drive using rich instruction set software. Motor operates in closed loop mode and coding can be downloaded to drive or unit can be controlled using commands from attached controller. With supply of 12-80 Vdc and 0.2-5 A peak output current, it is offered in single or double stack versions and can be supplied with encoder fitted to rear shaft.