Applimotion, Inc.
Loomis, CA 95650
Nov 09, 2009 Covering 29-240 mm dia with thin radial length, UTS Series direct drive slotless motors suit direct drive positioning or high speed spindle applications. Frameless feature allows integration of unit into high speed spindles, operate with very low heating. Motors operate from industry standard brushless DC or brushless AC drivers from 12-300 V and can be wound for low speed or high speed applications.

Remy International, Inc.
Pendleton, IN 46064
Oct 13, 2009 Supplied with matched inverter/control system, Model HVH250 off-the-shelf electric motor/generator is based on High Voltage Hairpin technology, which optimizes motor performance and cooling effectiveness. Unit's torque and power density maximizes range in all-electric drive mode. HVH motor exceeds Department of Energy targets for electric motor power density.

Maxon Precision Motors, Inc.
Burlingame, CA 94010 1304
Jul 13, 2009 Measuring 25 mm in dia x 84 mm long, 250 W Model EC 25 offers friction-reduced, low-vibration operation over entire speed range. Rotor is equipped with preloaded ball bearings and 2-pole neodymium permanent magnet. With efficiency above 93% and speed/torque gradient of 44.9 rpm/mNm, motor is suited for high-speed, spindle-driven applications as required in medical technology or machine tools.

ThinGap LLC
Ventura, CA 93003
Jun 17, 2009 With ability to deliver controllable high speed/high shaft power without gearbox, TG14010 brushless DC ring motor can be used for direct drive ducted-fan applications in unmanned aerial vehicles and hub-mounted motors for unmanned ground vehicles. Unit supplies 50 ft-lb peak torque from 3.7 in. length by 13.55 in. dia package that weighs only 23 lb. It conserves energy with gyroscopic effect that reduces vibration, and can be mounted inside wheel hub of vehicle propulsion systems.

Michael Smith Engineers Ltd
Surrey   United Kingdom
Jun 04, 2009 Designed for use with PF and TBF series drum pumps, M3V and M5V feature tool-free motor attachment method whereby lower section of motor has collet style connection. They offer variable electronic speed control for controlling fluid flow, double wall motor housing for minimizing noise and vibration, and downdraft cooling system. Models are available to handle capacities up to 150 Lpm and viscosities up to 100,000 Cp.

Greenheck
Schofield, WI 54476 0410
May 28, 2009 Available in ¼, ½ and ¾ hp sizes, electronically commutated high-efficiency motor Vari-Green is capable of operating from 20-100%. Unit offers 3 different control options including 0-10 Vdc input wiring, motor-mounted dial, or wall-mounted dial.

New Scale Technologies
Victor, NY 14534
Apr 13, 2009 Featuring stainless steel housing, SQL-1.8-6-12-SS SQUIGGLE Motor measures 2.7 x 2.8 x 6 mm and mounts with tabs or adhesive. Unit features 6 mm travel range, 0.5 µm resolution, speeds greater than 7 mm/sec, and stall force of 30 g. With solid bottom surface, motor is suitable for integrating into high-volume miniature products, such as optical systems, medical devices, and micro-robotic instruments.

Mohawk Innovative Technology, Inc
Albany, NY 12205
Apr 09, 2009 Available in 5 models with rated speeds from 60,000-120,000 rpm, Variable Speed Synchronous and Asynchronous Motors feature maintenance-free operation by using foil gas bearings and either permanent magnet or induction motor elements. Korolon(TM) lubricious and wear-resistant bearing coating maximizes life for both intermittent start/stop and continuous operation. Applications include pumps, blowers, aerospace and aircraft equipment, and compressors.

Bodine Electric Co.
Chicago, IL 60618 4798
Mar 16, 2009 Available in 24A and 33A frame motor sizes, 12 V PMDC Gearmotors and Motors can be built in combination with parallel shaft, hollow shaft, or right-angle gearheads with gearmotor output speeds from 5.6-660 rpm. Units range from 1/50-1/8 hp and can generate up to 310 lb-in. torque. Pulse-width-modulated Type WPM-12 Vdc Speed Control is suited for battery-powered, solar-powered, and other low-voltage applications that require basic, single-direction speed control.

Intelligent Motion Systems, Inc.
Marlborough, CT 06447-1334
Mar 05, 2009 NEMA size 23 brushless 1.8° stepping motor MDrive23Plus is available in 3 versions; microstepping with step and direction input, motion control with intelligent programmable controller, and speed control with velocity controller. Featuring extended operating range of -40 to +85°C and small footprint, product is available with various options to meet specific application requirements including encoders, planetary gearboxes, QuickStart Kits, and interface cables.

B & R Industrial Automation Corp.
Roswell, GA 30076
Mar 04, 2009 With optimized torque ripple and stall torque between 0.8-2.5 Nm, 8JS three-phase synchronous motors have sinusoidal commutation with EnDat encoder or resolver as feedback unit. They directly divert lost power generated in stator to flange via housing, allowing regeneration of energy.

Toolmex Corp., Machinery Div.
Schaumburg, IL 60193
Mar 02, 2009 Featuring motor running at speed of 1,200 rpm, Elektrimax Design "D" oil well pump motors are suited for beam pumping units, punch presses, and applications demanding high slip and torque motor solutions. IP55 protected, dust and water resistant units have oversized regreasable bearings on both drive end and opposite drive end. Epoxy coated motors are rust and corrosion resistant, and are VPI process applied for optimal electrical performance.

Applimotion, Inc.
Loomis, CA 95650
Feb 10, 2009 Outside rotating frameless motor kits of ULT-O series feature rotor external to stator, allowing for integration of rotor ring into outside rotating hub. Optimized for smooth, low-speed motion or high-precision applications, motors operate from 3-phase brushless DC/AC sinusoidal servo drives. Through hole and profile sizes promote application flexibility, and windings are available for operation from 12-300 Vdc.

Dynetic Systems Corp.
Elk River, MN 55330 2496
Oct 29, 2008 Designed to interface to sinusoidal drives from 12-320 Vdc, Brushless PM Servo Gear Motors provide gear motor torque values from 26.5-224 lb-in. Maximum gear motor momentary torque is 198 lb-in. for NEMA size 23 and 633 lb-in. for NEMA size 34 motors. Available in IP65 or IP67 configurations, units come with single, dual, and 3-stage geartrains in 10 gear ratios from 16:1-1,012:1. Applications range from aerospace actuators to industrial machines and medical equipment.

Bison Gear & Engineering Corp.
St. Charles, IL 60174
Oct 20, 2008 Designed as Von Weise Drop-In Replacements, VWDIR14 Series parallel shaft gearmotors utilize 1/20 hp AC motors, which can be operated from 115 or 230 V, 60 or 50 Hz power sources. Permanent split capacitor AC motors and integral gear reducers are reversible and feature all-position face mounting with 50 lb overhung load capability. Available in 6 models, units offer gear ratios from 10:1 to 494:1 and corresponding output speeds from 1.81-4 rpm.

WEG Electric Motors Corp.
Suwanee, GA 30024
Sep 24, 2008 Rated 500 hp and above as set forth by API, PetroDuty-541 features voltage capacity of 2,300-13,200 V and dual voltages of 2,300 and 4,000 V. Unit is available with direct on line or variable frequency starting methods and variety of enclosures. Rated for 250-3,000 hp, PetroDuty-547 also has voltage capacity of 2,300-13,200 V. Unit features die-cast aluminum rotor for 1,000 hp or less and copper bar rotor for 1,000 hp and above. Both motors operate on 50/60 Hz frequencies.

Baldor Electric Company
Fort Smith, AR 72901
Sep 15, 2008 Baldor Reliance API 547 large AC industrial motor meets American Petroleum Institute's Specification 547 requirements and is designed for safe and reliable operation in severe duty applications. Suited for pump compressor and fan applications, it is available from 250-3,000 hp in 2-, 4-, 6-, and 8-pole speed configurations.

Bison Gear & Engineering Corp.
St. Charles, IL 60174
Sep 10, 2008 Designed as Von Weise drop-in replacements, VWDIR83 permanent magnet gearmotors are available in 12 standard models, 6 each for 12 and 90 Vdc inputs. With fixed output speeds ranging from 6-93 rpm and output torques from 50 to 13 in.-lb, units feature 1/30 hp permanent magnet dc motors with replaceable brushes, grease lubrication, and all-position face mounting with 50 lb overhung load rating. Applications include peristaltic pumps, commercial floor care appliances, and door operators.

Bison Gear & Engineering Corp.
St. Charles, IL 60174
Aug 20, 2008 Including 75 standard gearmotor models for wide variety of commercial and light industrial applications, Von Weise Drop-In Replacements (VWDIR) fractional horsepower gearmotors feature output torque range of 12-800 in.-lb. DC models include 12 and 90 V permanent magnet motors as well as 115 V universal motors, while AC models are available with 115 and 230 V inputs in permanent split capacitor, split phase, shaded pole, and universal motor designs.

NSK Precision America
Franklin, IN 46131
Jul 22, 2008 Capable of 2s^-1 max rotational speed, 7 in. dia Megatorque PN Series Motors incorporate absolute position sensor with resolution of 2,621,440 counts/rev and positioning accuracy of 90 arc sec, requiring no homing operations. Megaterm software provides editing, preparing, and controlling functions. Featuring ultra-thin 35 mm design, motors are suited for semiconductor chip inspection, tool changers for machine tools, and medical liquid handling equipment.