Applimotion, Inc.
Loomis, CA 95650
Nov 09, 2009 Covering 29-240 mm dia with thin radial length, UTS Series direct drive slotless motors suit direct drive positioning or high speed spindle applications. Frameless feature allows integration of unit into high speed spindles, operate with very low heating. Motors operate from industry standard brushless DC or brushless AC drivers from 12-300 V and can be wound for low speed or high speed applications.

Midwest Motion Products
Watertown, MN 55388
Nov 03, 2009 Accepting any 12 Vdc source, including battery power, Model MMP-D33-455B-12V GP81-308 requires just 21 A to generate full load torque. Unit features keyed output shaft measuring 19 mm dia x 40 mm long, and mounts via 4 face mount M6 threaded holes, equally spaced on 65 mm dia B.C. Rated IP54 for harsh environments, reversible gearmotor is suited for battery powered electric vehicles, robotics, and automation applications. Motor windings for 24, 36, 48, 60, 90 V are available.

Midwest Motion Products
Watertown, MN 55388
Jul 29, 2009 Measuring 2.24 in. dia x 7.75 in. long, MMP-TM55-24V GP57-317 reversible gearmotor has 12 mm dia x 25 mm long keyed output shaft and gearhead efficiency of 90%. Mounting is accomplished via 4 face mount M5 threaded holes, and variable-speed operation is supported. Able to generate up to 1,000 lb-in. peak, this IP54 gearmotor is available with 12, 36, 48, 60, and 90 V windings are available. Areas of use include battery-powered electric vehicles, robotics, and automation applications.

Bison Gear & Engineering Corp.
St. Charles, IL 60174
Jul 14, 2009 Driven by ¼ or ½ hp 3-phase 230 V TEFC AC electric motors, 650 Series inverter-duty variable speed gearmotors are designed for long life variable frequency drive operation with continuous duty torque outputs from 148-717 lb-in. Verdant Duty(TM) AC gearmotors consists of 5 models with gear ratios from 27.6-214.5:1. Units are suited for conveying and dynamic load application.

Midwest Motion Products
Watertown, MN 55388
Jul 07, 2009 Accepting any 24 Vdc source, MMP-D22-376D-24V GPk52-046-LS measures 2.14 in. dia x 7.2 in. long and has keyed output shaft of ½ in. dia x 1.5 in. long. Mounting is accomplished with 4 face mount M5 threaded holes equally spaced on 40 mm dia BC. Output of this reversible gearmotor is rated for 50 lb-in. continuous torque at 110 rpm and 89 lb-in. peak. Requiring 4.3 A @ 24 Vdc to generate full load torque, IP54 rated product is available with 6 motor windings for 12-90 V.

Midwest Motion Products
Watertown, MN 55388
May 19, 2009 With full continuous output torque of 398 lb-in., Model MMP-TM55-36VGP57-308 consumes 2.1 A of current and delivers 13 rpm of continuous output speed. Reversible gearmotor measures 2.14 in. dia x 7.75 in. long and incorporates 12 mm dia x 25 mm long keyed output shaft. Unit mounts using 4 face-mount M5 threaded holes, equally spaced on 40 mm dia B.C. Motor windings for 12, 24, 48, 60, and 90 V are available for IP54-rated devices.

Bodine Electric Co.
Chicago, IL 60618 4798
May 12, 2009 Pacesetter(TM) 230/460 Vac, 3-phase gearmotors and motors suit factories where various power supply options are present. In addition to range of torque, speed, and horsepower ratings, these CE- and RoHS-compliant products offer Quintsulation(TM) 5-stage insulation system that protects motor from potential spikes or corona damage caused by inverter. Frame motors 34R and 42R, available with dual-voltage windings and inverter-duty ratings, can be matched with type E, F, and 5N gearheads.

Midwest Motion Products
Watertown, MN 55388
May 12, 2009 Accepting any 12 Vdc source, reversible model MMP-FM125-12V GRA-240 has rated output of 86 lb-in. continuous torque at 19 rpm and 100 lb-in. peak. Elements of construction include 2.5 in. dia motor with 3.2 x 2.2 in. gearbox and overall length of 8.15 in. as well as ¾ in. dia x 1.5 in. long keyed dual output shaft that exits both sides of gearbox. Hollow Shaft designs are also available, and support for variable-speed operation is standard.

Sauer-Danfoss
Ames, IA 50010
May 01, 2009 Designed to meet engine cooling requirements and improve operating efficiency in off-highway applications, SGM2Y and SGM3Y fan drive gear motors are, respectively, available with 8.4-25.2 cc and 22.1-44.1 cc displacements. Durability and performance features include cast iron rear cover, with integrated electrohydraulic proportional relief valve, on aluminum housing. Also, variable-speed proportional fan control promotes efficient, on-demand cooling and fuel economy.

Midwest Motion Products
Watertown, MN 55388
Apr 21, 2009 Measuring 2.14 in. dia x 7.7 in. long with 12 mm dia x 25 mm long keyed output shaft, MMP-TM55-24VGP52-236 reversible gearmotor accepts any 24 Vdc source and can produce 238 lb-in. continuous torque at 20 rpm (443 lb-in. peak). Lightweight (3.5 lb) solution, available with motor windings for 12, 36, 48, 60, and 90 V, is rated IP54 and accommodates variable speed controls. It suits battery-powered electric vehicles, robotics, and automation applications.

Midwest Motion Products
Watertown, MN 55388
Apr 10, 2009 Accepting any 24 Vdc source, including battery power, Model MMP-TM55-24VGP52-04.3 measures 2.14 in. dia x 6.7 in. long, weighs 3.5 lb, and has keyed output shaft 12 mm in dia x 25 mm long. Device requires 3.6 A at 24 Vdc to generate full load torque, and motor windings for 12, 36, 48, 60 and 90 V are available. Reversible motor is rated IP54 for operation in harsh environments, and can be mounted with 4 face mount M5 threaded holes, equally spaced on 40 mm dia between center.

Mohawk Innovative Technology, Inc
Albany, NY 12205
Apr 09, 2009 Available in 5 models with rated speeds from 60,000-120,000 rpm, Variable Speed Synchronous and Asynchronous Motors feature maintenance-free operation by using foil gas bearings and either permanent magnet or induction motor elements. Korolon(TM) lubricious and wear-resistant bearing coating maximizes life for both intermittent start/stop and continuous operation. Applications include pumps, blowers, aerospace and aircraft equipment, and compressors.

Sauer-Danfoss
Ames, IA 50010
Apr 06, 2009 Suited for heavy-duty fan drives and powering work functions, D Series cast iron gear motors provide 4,000 psi solution in ductile 3-piece housing with electrohydraulic proportional relief valve, which maximizes machine horsepower by providing cooling only as needed. Motors also incorporate high-temperature seals and dust-resistant shaft seal. Lined with Teflon® PTFE, bronze sleeve bushings in front flange provide optimized radial load capability before requiring use of outrigger bearings.

Midwest Motion Products
Watertown, MN 55388
Apr 01, 2009 Accepting any 36 Vdc power source, including battery power, Model MMP-TM55-36VGP52-308 measures 2.14 in. dia x 7.75 in. long and has keyed output shaft of 12 mm dia x 25 mm long. Output of this reversible gearmotor is rated for 308 lb-in. continuous torque at 13 rpm and 443 lb-in. peak. Requiring 2.1 A @ 36 Vdc to generate full load torque, 4 lb gearmotor helps extend battery life and produces minimal noise. Motor windings for 12, 24, 48, 60, and 90 V are available.

Midwest Motion Products
Watertown, MN 55388
Mar 04, 2009 Model MMP-TM55-60-24V GP52-195 is reversible gearmotor capable of 443 lb-in. peak torque, requiring 1.3 A at 24 V for full load and also accepting battery power. Device is mounted with 4 equal spaced, face-mount M5 threaded holes. Featuring IP54 rating, it weighs 4 lb with 2.14 in. dia and 7.75 in. length and includes 12 mm dia, 25 mm long keyed output shaft. Motor windings for 12, 36, 48, 60, and 90 V are available.

B & R Industrial Automation Corp.
Roswell, GA 30076
Mar 04, 2009 With optimized torque ripple and stall torque between 0.8-2.5 Nm, 8JS three-phase synchronous motors have sinusoidal commutation with EnDat encoder or resolver as feedback unit. They directly divert lost power generated in stator to flange via housing, allowing regeneration of energy.

JVL USA/Motion Control Sales Ltd.
Morrow, OH 45152
Feb 27, 2009 Featuring modular design can be adapted to various applications, MAC integrated servo motor can incorporate Module MAC00-FB4 for completely cable-free and wireless control. Motor can be set-up and controlled over BlueTooth link via mobile phone or PC through module, which can be programmed via MacTalk software. Module also offers possibility for connection of local zero-set sensor and provides full access to all functions and registers in MAC motor.

Imperial Electric, A Kinetek Co.
Akron, OH 44306
Jan 19, 2009 Offering max lift capacity of 4,000 lb at 500 fpm with 2:1 roping, Model 478 is suited for high-passenger traffic areas in low-rise buildings. Motor, sheaves, and brake assemblies, integrated into one compact unit, reduce dimensional requirements. Capacity will accommodate larger car size, capable of transporting disabled patient, medical personnel, and life support equipment without restrictions. Brake torque is 1,400 lb-ft per shoe, and max sheave shaft load is 11,025 lb.

Bison Gear & Engineering Corp.
St. Charles, IL 60174
Jan 06, 2009 Available in 8 standard models, VWDIR20 incorporates ¼ horsepower (186 W), 115 V/60 Hz split phase electric motors. Compact, integral gear reducers feature phenolic high-speed gear for low noise and steel gearing in subsequent stages, with ratios from 14:1-286:1. Corresponding fixed output speeds are from 120-6 rpm, with continuous torque ratings from 100-600 lb-in. Built-in face and foot mounting is available, with overhung load capability to 300 lb.

JVL USA/Motion Control Sales Ltd.
Morrow, OH 45152
Dec 30, 2008 With inclusion of DeviceNet Expansion Module, MAC50-141 and MAC800 series integrate AC-servo motor, encoder, amplifier, positional controller, and DeviceNet. Double-supply facility is available so position and parameters are maintained intact, for example, during emergency stop. Devicenet Expansion Module, which enables access to motor registers, offers position, torque, and velocity control; 6 inputs and 2 outputs; as well as I/O for end-of-travel limits and high-speed start/stop.