JVL USA/Motion Control Sales Ltd.    Morrow, OH 45152
Mar 27, 2012 Available for complete JVL range of integrated servo motors, JVL Profinet Module is equipped with 2 Ethernet connectors and built-in switch, enabling line topology without extra hardware. Several LEDs enable technicians and operators to get quick status overview, while opto-isolated digital I/Os embedded in module allow control of extra sensors without external I/O modules. All connectors are rugged M12 connectors suitable for industrial environments.

I.P.T.S., Inc.    Riviera Beach, FL 33407
Mar 20, 2012 Sealed for life and maintenance-free, 12 Vdc Model IGMRR-SD features 4-stage helical/spur gear design with 2 hp, 60:1, 68 rpm rating and 150 lb-ft torque. Unit has 2-hole hardened steel output shaft and 6-hole mounting pattern. Suitable for front to back sliding tarp systems from 22-48 ft, gearmotor meets needs of multi-axle dump trucks, dump trailers, roll-off/hook-lift hoists, and roll-off trailers.

BEI Kimco Magnetics    Vista, CA 92081
Mar 05, 2012 Suited for industrial scanning applications, DXH15-10-000A Outer Member Rotating BLDC Motor supports inner rotational speed variations by maintaining shaft run-out of ±0.010 in., resulting in jitter of less than ±0.1%. Precision ball bearings and balanced rotor ensure optimal operation at speeds in excess of 11,000 rpm under continuous duty over life of system. Measuring 1.5 in. OD and 1.0 in. in axial length, motor incorporates Hall commutation circuit that produces exacting switch points.

Applimotion, Inc.    Loomis, CA 95650
Feb 08, 2012 With resistances down in milliohm range, ULT, UTH, UTS, and UTO Frameless Motor Kits are suitable for battery-operated systems ranging from propulsion to accessories in light EV systems. Frameless kits cover sizes from 7.5-533 mm diameter and torque outputs that exceed 1,000 nm. By modifying wire gage, motors can be optimized for 12-600 V applications.

Sanyo Denki America Inc.    Torrance, CA 90501
Feb 03, 2012 Providing 0.92 oz-in. holding torque, F2 Series 2-Phase Stepping Motor features step angle of 1.8°/step and rated current of 0.3 A/phase. Single and double shaft models are available. Motor, with compact 0.55 in. frame and weighing only 1 oz, is suited for space-limited applications in automation, medical, and semiconductor industries, including electric grippers, electric cylinders, and robots.

NovaTorque, Inc.    Fremont, CA 94538
Jan 19, 2012 Driven by variable frequency drives, Gen2.0 PremiumPlus+(TM) brushless permanent magnet motors come packaged in standard NEMA frame sizes and mounting dimensions to facilitate substitution. Motor-only rated point efficiencies of 93.0% and 92.0% for 3 and 5 hp versions, respectively, and efficiency is maintained over speed and load range. Due to flux-focusing stator and rotor hub geometry, motor produces performance with all-ferrite magnet design.

Pittman Corp    Harleysville PA 19438
Jan 16, 2012 Comprised of 1.18 in. dia models available in 2.114, 2.585, and 3.057 in. lengths, brush-commutated 8540 Series delivers optimized power density via use of bonded neodymium magnets. Continuous torque ratings from 2.5-8.3 oz-in. are achieved without heat sink, and 8 standard windings are available from 9.55-48 V; customized windings may also be designed for specific applications. Other features include pre-loaded ball bearings and optimized bearing support system.

BEI Kimco Magnetics    Vista, CA 92081
Jan 13, 2012 Featuring 100.0 mm diameter and 100.0 mm stack length, Model LAT40-48 delivers peak torque of 21.5 Nm and ±15° stroke. Use of rare earth magnets creates power density of 10.08 oz-in./W, while single phase winding provides control - 30° excursion is accomplished with no commutation. Since rotor has no preferred position, cogging is eliminated, enabling smooth performance for applications that require uninterrupted operation, such as stabilization platforms, scanning, and beam steering.

Kollmorgen Corp.    Radford, VA 24141
Dec 09, 2011 Operating at 120/240 Vac or 160/320 Vdc, VLM Value-Line Servomotors deliver rated speeds up to 6,000 rpm, while providing 16 Nm peak torque and nearly 5 Nm continuous torque. RoHS-compliant units are available in most common motor sizes with 12 standard windings, and in both NEMA 23/NEMA 34 and Metric 60 mm and 90 mm mounting standards. Multiple feedback and cable options offer configuration flexibility.

Danaher Motion/Portescap    Radford, VA 24141
Dec 06, 2011 Able to adapt to closed loop control systems, HM series includes 42 and 57 mm frame sizes each with short stack, one stack, or 2 stack design. Windings can be customized to satisfy application requirements, and several optional encoder mounting features are available. Depending on stack length, HM 42 mm motors provide holding torque to 65 oz-in., and HM 57 mm motors deliver 330 oz-in. max. RoHS-compliant series can serve as drop-in replacement in industrial and medical hybrid applications.

Dumore Corp.    Mauston, WI 53948
Nov 29, 2011 Powered by DM30 permanent magnet motor in voltages from 12-240 Vdc, Series DR250 provides continuous output torques to 250 lb in. Single reduction worm drive gear motors feature steel and bronze gear train, offering OEMs quiet operation in UL Recognized design. Built in USA, units are suited for battery or AC powered lifting and moving applications, such as wheelchair lifts, welding wire feeds, cranes, winches, hoists, and conveyors.

AutomationDirect.com    Cumming, GA 30040-9905
Nov 22, 2011 Available in 22-482 A sizes, Stellar(TM) SR33 Series features 2-phase control and separately adjustable motor start voltage and start/stop times. Units provide fault indication of 4 or 7 fault types, depending on model, including SCR or power supply, overheat, control power supply, bypass relay failure, shearpin, overload, and overcurrent. Suited for pumps, blowers, and conveyors, starters use thyristors for controlled starting/stopping and switch to internal contacts for running at rated speed.

Midwest Motion Products    Watertown, MN 55388
Nov 10, 2011 Accepting any 36 Vdc source, including battery power, Model MMP-D33-655D-36V GP81-019 develops 155 lb-in. continuous torque at 188 rpm, and 1,062 lb-in. peak. Unit requires just 14 A at 36 Vdc to generate full load torque. Measuring 3.2 in. D x 11.3 in. L with 19 mm D x 40 mm L keyed output shaft, reversible motor is mounted with 4 face mount M6 threaded holes, equally spaced on 65 mm dia between center. Motor windings for 12, 24, 28, 42, 48, 60, and 90 V are available.

Buehler Motor, Inc.    Morrisville, NC 27560
Nov 08, 2011 Characterized by metal brush-end shield and 5 mm shaft, 40 mm DC Motor has 7-slotted armature that allows for maximum copper fill. Drive elements such as pinions and pulleys may be incorporated, and standardized lead wires that exit either axially or radially give motor additional flexibility in various mounting positions. In addition to office and paper-handling applications, motor is suited for building automation and medical industries.

Maxon Motor AG      Switzerland
Nov 02, 2011 Meeting deep/downhole drilling technology requirements, EC 22 HD comes in variants designed for operation in air and rated to 80 W or submerged in oil (flooded in hydraulic fluid) and rated to 240 W. Electronically commutated, 22 mm dia motor, exhibiting up to 88% efficiency in air and 70% in oil, copes with ambient temperatures exceeding 390°F and atmospheric pressures of up to 25,000 psi. It also withstands vibration of up to 25 grms as well as impulse and impact of up to 100 G.

Midwest Motion Products    Watertown, MN 55388
Nov 01, 2011 Measuring 3.2 mm D x 11.3 in. L with 19 mm D x 40 mm L keyed output shaft, Model MMP-D33-655D-36V GP81-019 accepts any 36 Vdc source, including battery power. Unit delivers 155 lb-in. continuous torque at 188 rpm and 1,062 lb-in. peak torque. Featuring IP54 rating for harsh environments, fully reversible gearmotor is mounted via 4 face mount M6 threaded holes, equally spaced on 65 mm diameter B.C. Motor windings for 12, 24, 28, 42, 48, 60, and 90 V are available.

BEI Kimco Magnetics    Vista, CA 92081
Oct 17, 2011 Built to operate under continuous load of 100 oz-in. at speeds of 6,000 rpm, IP65 washdown rated DIH27-63-BDNA offers peak torque capabilities of 450 oz-in. and incorporates corrosion-resistant, machined aluminum housing with black anodized coating. Cable strain relief, sealed bearing, and completely enclosed system guard against leaks while providing added protection for internal electrical connections. Rated for operation up to 155°C, motor has 2.7 in. OD and 6.0 in. axial length.

Midwest Motion Products    Watertown, MN 55388
Oct 07, 2011 Accepting any 24 Vdc source, including solar or battery power, Model MMP D22-376D-24V GRA60-032 BR-005 delivers 29 lb-in. output torque at 230 rpm. Reversible unit measures 2.24 in. D x 7.2 in. L, including brake, and has 14 mm D x 25 mm L keyed output shaft. Mounting is accomplished with 4 face mount M5.5 threaded holes, equally spaced on 52 mm dia B.C. Requiring 4 A at 24 Vdc to generate full load torque, IP54-rated motor is suited for solar tracking, robotics, and automation applications.

Applied Motion Products, Inc.    Watsonville, CA 95076
Sep 21, 2011 Integrating NEMA step motor, microstepping drive, and controller, STM24 Series provides holding torque up to 340 oz-in. Profile Position, Profile Velocity, and Homing modes are fully supported at data rates up to 1 Mbps. S versions accept step and direction, analog input, joystick control, and streaming host commands using SCL language, while Q versions add stand-alone programmable operation using Q programming language. Both offer RS-232 or RS-485 communication.

API Portescap U.S. Inc.    West Chester, PA 19382
Sep 21, 2011 Delivering efficiencies approaching 90%, Athlonix(TM) series satisfies intrinsic safety application requirements with REE (Reduced Electro Erosion) technology. Motors incorporate salient features such as low moment of inertia, no cogging, low friction, and compact commutation, lending to increased acceleration and continuous torque as well as minimal joule losses. Max continuous torque ratings range from 0.66-158.6 mNm, and no load speed varies from 11,000-5,500 rpm.