Pacific Aerospace & Electronic
Wenatchee, WA 98801
Jul 23, 2009 Hermetic Bulkhead Feedthru is designed for use with Souriau ELIO 38999 fiber optic connector line. It features insertion loss of less than or equal to 0.3 dB per interface and return loss less than or equal to 20 dB per interface and can be manufactured to support multi-mode 50, 62.5/125, or 100/140 µm fiber types. Compatible with aluminium, titanium, and SS, unit is designed to mate with aluminium or composite ELIO contacts and is available in jam nut or laser weldable configurations.

Douglas Electrical Components, Inc.
Rockaway, NJ 07866
May 28, 2009 Compatible with variety of liquids and gases including refrigerants, oils, heat transfer fluids, and jet fuels, StudSeal(TM) hermetic feedthroughs transfer power into and out of sealed environments at operational loads up to 1,000 A and 15 kV. StudSeals typically consist of threaded rod on both sides of hermetic seal; other standard and custom solutions are available, such as crimp fittings and terminal-to-wire solutions occurring inside of epoxy and compression fittings.

Douglas Electrical Components, Inc.
Rockaway, NJ 07866
Apr 02, 2009 Custom-designed and fabricated Portplate Assemblies come fully assembled with pre-tested multiple feedthroughs. Plates can house variety of connector densities and counts, as well as mating connectors and fiber optic bulkheads. Provided with or without connectors, assemblies offer full strain relief and are available in 6-48 in. dia sizes. Finished, ready-to-pump plates accommodate mixed configurations including those from Ductorseal®, Studseal(TM), Optiseal(TM), and Potcon(TM) product families.

Douglas Electrical Components, Inc.
Rockaway, NJ 07866
Jan 26, 2009 Available with aluminum, titanium, steel, brass, plastic, or low-out-gassing epoxy housings, Ductorseal® sealed wire and cable assemblies solve through-bulkhead conductor sealing problems by providing interconnecting harness in fully sealed and pre-wired hermetic feedthrough. They are available with various standard or custom wire bundles, and are epoxy-sealed to provide leak-free performance in operating environments from 1x10^-10 Torr through 15,000 psi and 4 K (LHe) through 200°C.

Thunderline-Z
Hampstead, NH 03841
Mar 05, 2008 Bell Pin(TM) surface-mount feedthrus are constructed with gold-plated Kovar base and center conductor fired in place with low-loss corning glass. Able to be used at J and K band frequency ranges, products are offered with .009 in. dia pin option and deliver 50 ohm performance. They work with lightweight aluminum or brass housings, mounting to bottom of package to create true surface-mountable parts. Parts also help reduce weight in microwave packages.

Binder-USA
Camarillo, CA 93012
Dec 17, 2007 Constructed with metal design including M12x1 thread locking termination, M12 Feed-Through Connectors are available in 4, 5, and 8 gold-plated contacts with A-coding. Diameter of mounting hole is 20 mm with anti-rotation flats. When properly mated, feed-through adapters maintain environmental protection rating of IP67 at both panel and mating area on each side of adapter.

Accu-Glass Products, Inc.
San Fernando, CA 91340
Mar 30, 2007 Featuring 9 gold-plated pins in straight-through pin-to-pin design, Subminiature-C Feedthroughs can be installed in 1.33 in. CF metal seal and ISO-NW16KF elastomer seal flanges. Ultra High Vacuum units are hermetically sealed and electrically insulated in stainless steel shell using glass-ceramic bonding technology. Air and Vacuum side connectors are fitted with captured stainless steel socket head screws for securely locking to mating feedthroughs.

CeramTec North America Corp.
Laurens, SC 29360
Jan 02, 2007 Available in 40 kV and 50 kV, Hermetic High Voltage Feedthroughs each have 10 A current carrying capacity. Units include weldable, ConFlat®, and ISO flange-mounted installation configurations. Corona-resistant cable assembly utilizes molded silicone body and silicone insulated cable in lengths of 8 ft. Built for extreme conditions, feedthroughs feature temperature capability of -269 to 450°C and are guaranteed to be leaktight to leak rate less than 1 x 10^-10 atc-cc/sec.

CeramTec North America Corp.
Laurens, SC 29360
Aug 10, 2006 Featuring copper conductor, .250 in. Power Plug Feedthrough and Cable Assembly handles up to 25 kV and 100 A. It is available in weldable, ConFlat®, and ISO flange-mounted installation configurations of 1-4 pins. Cable assembly utilizes custom plug or boot to mate to feedthrough and 6 AWG tin-plated copper conductor cable with silicone insulation. Feedthrough has temperature capability of -269 to 450°C, with leak rate of less than 1 x 10^-10 atm-cc/sec.

CeramTec North America Corp.
Laurens, SC 29360
Oct 15, 2002 Single conductor thermocouple feedthroughs, offered as loop type or spade type, are available in Chromel, Alumel, Iron, Constantan, Tungsten 5% Rhenium, or Tungsten 26% Rhenium. Three and five pair spade type thermocouples are offered in Type K, Type J, and Type E. They come with air-side plugs and vacuum-side connection hardware. Circular connector thermocouples are available in Type K materials. All feedthroughs are available as weldable or flanged units.