Robin America Inc.
Wood Dale, IL 60191
Sep 30, 2005 Weighing 68 lb with height of 17.32 in., EH36 OHV slant cylinder 4-cycle engine offers max power output of 11.5 hp and meets EPA Phase 2 and CARB Tier II requirements. Features include aluminum alloy block, cast iron cylinder liner, and forged steel crankshaft with dual ball bearing support. QuickStart® starting system and HotSpark® electronic ignition system enable one-pull starts. Engine is suited for use in construction, rental, and agricultural equipment.

Kaydon Custom Filtration Corporation
LaGrange, GA 30240
Sep 28, 2005 Turbo-TOC® KL Series prevents oxidation and viscosity breakdown that may compromise turbine lubricant effectiveness. Combining coalescing technology with electronic touch controls, systems utilize K1100 pre-filter, K2100 coalescer, and K3100 separator to remove harmful water, particulates, and other contaminants. Along with pump pressure, element differential pressure, and oil temperature graphics, display also relays water removal data.

Robin America Inc.
Wood Dale, IL 60191
Aug 24, 2005 Suited for industrial and construction equipment, V-Twin cylinder 4-cycle OHV (overhead valve) gasoline engines provide smooth torque throughout rpm range. All models feature aluminum alloy block, cast-iron cylinder liners, and forged steel crankshaft in addition to full pressure lubrication system with trochoid type oil pump and air cleaner with dual elements. Offered in 18–25 hp models, engines meet EPA Phase 2 and CARB Tier II requirements.

Robin America Inc.
Wood Dale, IL 60191
Aug 23, 2005 Featuring overhead valve design, Subaru Robin EH41 slant cylinder, 4-cycle engine is designed with aluminum alloy block, cast-iron cylinder liner, and forged steel crankshaft with dual ball-bearing support. Splash type lubrication system and large capacity air cleaner with dual elements provide protection. Engine offers one-pull starts by teaming QuickStart® starting system and HotSpark® electronic ignition system with automatic decompression system.

MCE-5 Development
LYON   France
Jul 12, 2005 Designed to replace fixed compression engine blocks, Variable Compression Ratio Model MCE-5 integrates power transmission and compression ratio control. Main structure gives hydrodynamic bearings optimum geometrical environment. Roller-guided piston is not subjected to slap or radial stress, and engine block has no negative effects on other components or vehicle. Exhaust and transmission connections are identical to conventional engines.

Dresser-Rand Co., Turbo Products Div.
Olean, NY 14760
Jun 07, 2005 Single-stage Series 400RT is available in sizes from .75–450 kW with pressures to 700 psig and temperatures to 825°F. Dual exhaust outlets are symmetrically located and can be used individually or jointly. Idealube lubrication system automatically provides flood, splash, and mist lubrication when required. Monolithic wheel design is standardized and includes stainless steel milled style blading, metallurgically combined with alloy steel wheels.

General Motors Corp. North American Truck Group
Pontiac, MI 48342 2230
May 19, 2005 Four-cycle, 4-cyl Vortec 3000 is available in factory-installed multiport fuel injection gasoline version, and gaseous fuel version with 35 kW genset rating. With MPFI version, fuel injectors are positioned in intake ports of cylinder head and spray fuel on back of intake valves, promoting complete combustion. On high-output gaseous fuel engine, cylinder head combines with 10.5:1 compression ratio, resulting in ratings of 65 and 60 hp at 1,800 rpm with propane and natural gas, respectively.

EGC Enterprises, Inc.
Chardon, OH 44024
May 11, 2005 Tri-Clad® seals and gaskets combine Thermafoil® and Thermabraid® graphite with range of high-temperature metals. Compressible and resilient graphite elements act as spring to maintain sealing force throughout thermal excursions, while metal provides protection and support. Seals are suited for critical engine joints at temperatures exceeding 1,000°C.

Caterpillar, Inc.
Peoria, IL 61629
Apr 12, 2005 MorElectric System provides electrically powered heating, ventilating, and air-conditioning system, allowing all HVAC components to be removed from engine compartment. Electric power comes from 7,300 W generator that replaces alternator. When coupled with Auxiliary Power Unit, system provides driver with comfortable cab environment when main engine is off. Using Shore Power, truck is plugged into pedestal at truck stop, providing low emission idling solution.

GE Energy
Atlanta, GA 30339
Feb 07, 2005 Dry Low NOx combustion system reduces NOx emissions for company's 12 MW class 10-2 gas turbine from 25 to 15 ppm. Emissions level is guaranteed over operating conditions spanning 50-100% of load and ambient temperature range of -20° to +100°F. It requires no catalytic hardware minimizing number of combustion parts. Combustion chamber incorporates 4 GE5 premixed pilot burners and includes flame detector, flashback thermocouples, and humming detection system for full flame control.

Caterpillar, Inc., Solar Turbines, Inc.
San Diego, CA 92186 5376
Dec 13, 2004 Cold-end-drive, single-shaft Taurusâ„¢ 65 generator suits cogeneration, combined cycle, and other power generation applications. Generator set is rated at 6000 kWe for continuous duty at ISO conditions. It features 13-stage axial compressor with 15:1 pressure ratio that produces air inlet flow of 19.4 kg/sec, and utilizes 3-stage turbine with shrouded stage-3 turbine blade. SoLoNOâ„¢ combustion system reduces formation of NOx and CO, eliminating post-combustion clean-up devices.

Eastern Manufacturing Inc
Langhorne, PA 19047
Aug 23, 2004 Specifically designed for Honda Accords equipped with 4-cylinder, 2.3 L engine, Universal-fit Model 70262 is configured with center-mounted O2 sensor port to facilitate installation. It features round body that measures 14 x 10 x 4 in. Converter meets emissions and performance requirements and is OBDII-compliant in 49 states. It is not for installation on OBDII-equipped vehicles in California.

Bosal USA, Inc.
Whippany, NJ 07981
Jul 28, 2004 Made from 304 stainless steel, Performance Mufflers are seamlessly welded and polished to mirror finish. Straight-through, perforated, stainless steel core eliminates back pressure and flow restriction. Ceramic fiber packing is used for temperature resistance up to 1,150°F, and stainless steel mesh prevents blowout. Available in 16 models with variety of tip configurations, mufflers have 2¼ in. diameter inlets and can be welded or clamped for installation.

Iveco Motors
Carol Stream, IL 60188
Jul 08, 2004 Comprised of base engine, cooling system, and air filter, Cursor Gen-Drives connect to any power generator. Diesel engine, with 4 valves per cylinder, features electronic management of high-pressure fuel injection system, which cuts fuel consumption values to 0.325 lb/hphr. Rear-gear drive design enables noise levels to stay below 95 dBA. Available in 50 and 60 Hz versions with 12 or 24 V electrical system, Gen-Drives meet EPA Tier 2 and EC 97/68 Stage 2.

Robin America Inc.
Wood Dale, IL 60191
Jun 04, 2004 Models EH035 and EH035V are overhead valve engines that are horizontally and vertically mounted, respectively. Air-cooled, single-cylinder units produce max power output of 1.6 hp and use standard automotive gasoline and engine oil. Weighing 8 lb, engines feature silicone-constructed, abrasion-resistant, aluminum piston; chrome-plated cylinder; forged-steel rocker arm, and powder-metal-inserted cam gear. Lubrication system offers 360° operation.

Iveco Motors
Carol Stream, IL 60188
May 13, 2004 CURSOR Series consists of 6-cylinder, 24-valve diesel engines that can be configured to meet applications in industrial, agricultural, marine, and power generation industries. Available in 8, 10, and 13 liter versions, engines have total electronic control to monitor operating conditions. Compliant with emission and noise regulations, engines feature noise level below 95 dBA at maximum power. Select models offer variable geometry turbochargers.

Eastern Mfg., Inc.
Levittown, PA 19057
Apr 30, 2004 Intended for luxury cars, SUVs, and pickup trucks, QuietCat Converter incorporates baffled tube that cuts overall noise by 35% with no reduction in horsepower, torque, or catalytic efficiency. It is rated for engines up to 5.9 L/6,300 lb and comes in 2, 2.5, and 3 in. dia inlet and outlet sizes. Overall can length is 18 in. Available with and without single air tubes, converter meets emissions requirements, is OBD II compliant, and features proprietary catalytic chemistry.

Perkins Engines Inc.
Mossville, IL 61552 0610
Mar 15, 2004 Hitting 20 kVA power node, 404C-22G ElectropaK is offered in 50 and 60 Hz specifications with ratings of 1,500, 1,800, and 3,000 rev/min. Complying with all emissions legislation, it emits 2 Bosch Smoke Units and bare engine noise to 3 bB(A). Cooling pack, coupled with low air filter position, enable engine to provide optimum power density. Single canopy cross section fits entire range, and regular service intervals occur every 500 hr.

Perkins Engines Inc.
Mossville, IL 61552 0610
Mar 12, 2004 Compact 404C-15 consists of 4-cylinder, 1.5 l engine developed to meet needs of light construction, agricultural, and lawn and garden equipment sectors. With max rating of 26.5 kW @ 3,000 rev/min, it can also be used for electric power generation and aircraft ground support. Engine provides low-noise performance and is scheduled for standard oil and filter changes every 500 hr.

Perkins Engines Inc.
Mossville, IL 61552 0610
Oct 27, 2003 Series 1100 ElectropaK engines, models 1104C-44TAG1 and 1104C-44TAG2, incorporate open-top deck cylinder blocks that help reduce transmitted noise. These 4-cylinder turbocharged and air-to-air intercooled units address 60 Hz standby market nodes of 80 and 100 kWe and 50 Hz prime power nodes of 80 and 100 kVA. Engines offer 1.1 liter cylinder capacity and aggressive development of combustion system.