BorgWarner
Auburn Hills, MI 48326
Jul 01, 2008 Built with materials and coatings for compressor wheels and housings that withstand temperatures generated by recirculated exhaust gas, turbocharger can withstand harsh environment created by low-pressure exhaust gas recirculation (EGR) systems to meet emissions standards. Specialized coatings also prevent uncombusted particles from depositing on compressor, extending lifetime of turbocharger.

Mariah Power
Reno, NV 89521
Jun 16, 2008 Connected to building power supply, Windspire® vertical axis wind turbine offsets electricity use and, at times, runs electricity meter backwards. Styling helps unit blend into surroundings, while technology maximizes energy conversion, regardless of wind speed. Integrated, plug 'n produce(TM) design includes generator, inverter, wireless performance monitor, and tilt-up monopole. Unit can produce about 2,000 kWh of electricity in 12 mph average winds.

Mass Megawatts Wind Power, Inc.
Worcester, MA 01605
Apr 23, 2008 Utilizing canvas panel system, Adjustable Augmenter funnels and accelerates wind into Multi-Axis Turbosystem, increasing power output. System includes side wall dump panels and top panel lift systems that minimize pressure spikes in augmenter during extreme wind events. Side panels swing open when sufficient pressure differences exist between inside and outside of augmenter, while top panel lift system allows suspension cable to lift above next panel to vent air velocity to outside of augmenter.

UQM Technologies
Frederick, CO 80530
Jul 11, 2007 Permanent magnet propulsion system utilizes four-quadrant performance and other features to achieve 90% system efficiency over its performance regime. Features of this 200 hp system include 143 hp continuous power rating, 480 ft-lb peak torque, 295 ft-lb continuous torque, on-the-fly torque, and speed and voltage control. Unit is suitable for high performance automotive applications.

GE Energy
Atlanta, GA 30339
Jun 26, 2007 Designed for commercial on-site power applications, J624 GS Jenbacher gas engine outputs up to 4 MW and provides fuel flexibility (including landfill and coal mine gas or alternative fuels). It produces 3.6 MW of heat, allowing for overall plant efficiencies up to 90% while requiring 870 m³ of natural gas per hour. Lean burn, turbocharged, and mixture-cooled engine offers high heat recovery rate via customer-tailored, hydraulic integration of heat exchangers.

Cummins Engine Co., Inc.
Columbus, IN 47202 3005
Jan 03, 2007 Designed for minimal noise and optimal fuel economy, power delivery, and idle stability, QSK38 employs in-cylinder combustion system that meets Tier 2 NOx levels. Modular Common Rail fuel system enables full-authority electronic control over fuel timing, quantity, pressure, and delivery rate shape. Supplied in 38 L, V12 configuration with single-piece FCD pistons, engine is rated from 900-1,500 hp and provides up to 4,570 lb-ft torque at 1,000 rpm.

GE Energy
Atlanta, GA 30339
Dec 20, 2006 Producing 1.426 MW, Jenbacher J420 GS Gas Engine features Miller timing combustion system, spark plugs rated for up to 15,000 hr, and swirl-optimized, 4-valve cylinder head rated for 30,000 hr. Thermal output is 5,700 MTBU/hr when fueled by natural gas and 5,400 MBTU/hr with biogas. Engine provides electrical efficiency of 40.8% and total efficiency up to 86.6%.

Eaton Corp.
Southfield, MI 48037
Nov 02, 2006 Twin Vortices Series (TVS(TM)) Roots-type supercharger allows automakers to use smaller compressors to create optimal engine boost. In addition to scalable design, unit features 4-lobe rotors as well as high-flow inlet and outlet ports that promote thermal efficiency, which translates to increased volumetric capacity at higher RPMs.

Briggs & Stratton Corp.
Milwaukee, WI 53213
Oct 26, 2006 Vanguard(TM) V-Twin BIG BLOCK(TM) air-cooled engines are offered in vertical shaft models, 895 and 993 cc, for powering commercial applications. Along with centrifugal, multi-stage industrial air cleaner, engines incorporate debris management system that allows for cool and clean operation. Both models, based on V-Twin/Overhead Valve technology, feature aluminum block and steel-backed aluminum bearings. Tuned intake and exhaust systems minimize noise.

Briggs & Stratton Corp.
Milwaukee, WI 53213
Oct 26, 2006 Suited for use with 5.5-6.5 hp commercial equipment, CP550 and CP650 single-cylinder engines have compact Overhead Valve design, dual ball bearing crankshaft, and Dura-Bore cast iron cylinder sleeve. One-start carburetor enables one-pull starts and promotes smooth operation. Along with fuel shut-off valve and Lo-Tone muffler, engines incorporate high-mount oil-fill, low-oil sensor, and panel-style air filter with pre-cleaner and debris-ejection slots.

I POWER Energy Systems, LLC
Anderson, IN 46013-2317
Jul 27, 2006 Designed for extended duty applications, 120 hp, natural gas-fueled Model ENP 8.1 is based on Greenergy(TM) Technology, which supports organic agricultural systems. Technology combines induction system refinements, combustion chamber re-design, optimized air-fuel mixing, exhaust flow control and treatment, and electronic engine controller incorporating software tailored to meet application requirements. Engine produces less then 0.05 g/hp-hr of Nox and less than 0.60 g/bhp-hr of CO.

I POWER Energy Systems, LLC
Anderson, IN 46013-2317
Jul 14, 2006 Featuring cylinder heads that perform at 20,000 hr life-cycle span, Endura(TM) integrated systems provide on-site, continuous-duty power utilizing multi-fuel energy sources. They can produce electricity in tandem with, or independent of, utility grid systems or direct shaft power. Products are suited for fielded power generation units as well as low-emissions agricultural (AG) irrigation pumps.

GE Energy
Atlanta, GA 30339
Apr 19, 2006 J412 GS and J416 GS Jenbacher Type 4 gas engines are available at 50 Hz/1,500 rpm and 60 Hz/1,200 rpm. J412's electrical and thermal outputs are 845 kW and 897 kW, while J416's outputs are 1,127 kW and 1,195 kW. Electrical efficiency is 42.7% for the J412 and 42.8% for the J416, with minimum methane number of 85. Engines feature TecJet(TM) gas-dosing valve for control accuracy and combustion system that provides mechanical efficiency and fuel flexibility.

Air Squared, Inc.
Broomfield, CO 80020
Apr 05, 2006 Scroll expander is designed for expansion generators used to convert waste heat energy from exhaust gases or liquid cooling systems of internal combustion engines, fuel cells, and solar collectors. Unit offers expansion ratio of 4.6:1 and displacement of 12 cc/rev. Scroll features magnetic coupling that eliminates leakage path for working fluid, weighs 20 lb, measures 11.6 x 8.2 x 9.1 in., and provide pulse-free operation with 50 db noise level.

Iveco Motors
Carol Stream, IL 60188
Jan 23, 2006 Available in 8-, 12-, and 16-cylinder models, Vector Diesel Engines offer displacements of 20, 30, and 40 L and gross power ratings of 1,184, 1,777, and 2,368 hp, respectively. They have V-type cylinder configuration with 4 valves per cylinder. Featuring high-pressure common rail injection system, engines are turbo-charged, aftercooled, and can be configured to meet any application in industrial, marine, and power generation industries.

GE Energy
Atlanta, GA 30339
Oct 12, 2005 Featuring permanent magnet synchronous generator and modular converter with full power conversion, Wind Turbines are based on force flow optimized bedplate, which joins all nacelle components on common structure. Machines rated at 2.5 megawatt feature 100 m rotor diameters, while 3 megawatt units offer 90 and 94 m rotor diameters. Pitch regulation system with power/torque control and use of drive train damper mitigate loads of larger rotor.

GE Energy
Atlanta, GA 30339
Oct 11, 2005 Rated at 1.5 megawatt, 1.5xle model features LM 40 rotor blade with 82.5 m rotor diameter that is suited for class III or weaker wind applications. Extreme cold-weather package provides for nominal operation at temperatures as low as -30°C and in survival mode without operation at temperatures as low as -40°C. Available tower heights are 58.7, 80, and 100 m, and tallest version is also available in solid steel form with no concrete foundation.

Robin America Inc.
Wood Dale, IL 60191
Sep 30, 2005 Weighing 68 lb with height of 17.32 in., EH36 OHV slant cylinder 4-cycle engine offers max power output of 11.5 hp and meets EPA Phase 2 and CARB Tier II requirements. Features include aluminum alloy block, cast iron cylinder liner, and forged steel crankshaft with dual ball bearing support. QuickStart® starting system and HotSpark® electronic ignition system enable one-pull starts. Engine is suited for use in construction, rental, and agricultural equipment.

Kaydon Custom Filtration Corporation
LaGrange, GA 30240
Sep 28, 2005 Turbo-TOC® KL Series prevents oxidation and viscosity breakdown that may compromise turbine lubricant effectiveness. Combining coalescing technology with electronic touch controls, systems utilize K1100 pre-filter, K2100 coalescer, and K3100 separator to remove harmful water, particulates, and other contaminants. Along with pump pressure, element differential pressure, and oil temperature graphics, display also relays water removal data.

Robin America Inc.
Wood Dale, IL 60191
Aug 24, 2005 Suited for industrial and construction equipment, V-Twin cylinder 4-cycle OHV (overhead valve) gasoline engines provide smooth torque throughout rpm range. All models feature aluminum alloy block, cast-iron cylinder liners, and forged steel crankshaft in addition to full pressure lubrication system with trochoid type oil pump and air cleaner with dual elements. Offered in 18–25 hp models, engines meet EPA Phase 2 and CARB Tier II requirements.