Bowman Hollis Mfg., Inc.
Lagrange, GA 30241
Sep 17, 2009 With special grip tread contact surface, PHR160 RT is designed for pulling boxes positively through case sealer. Non-marking, tough nitrile rubber cover works in all sealer applications, including side- or bottom-belted sealers, while non-stretching carcass of 2 ply woven polyester is not affected by humidity or other environmental conditions. Available in any standard width, in either finished lengths with lacing, or in coils, belt can be joined by any type of mechanical lacing.

Argonics, Inc.
Marquette, MI 49855
Sep 16, 2009 Argonics Load Zone Impact Bed is engineered for CEMA B, C, and D idler classes. Custom-built to conveyor belt's width and trough angle, impact and slider bed is manufactured with collapsible trough wings and has hinge system with 2 x ½ in. support brackets for each support leg, simplifying installation/bar change-out. Kryptane® urethane impact bars feature energy-dispersion cavity to absorb impact for belt protection and aluminum insert that accepts ½ in. bolt.

Bowman Hollis Mfg., Inc.
Lagrange, GA 30241
Jul 28, 2009 Designed for understacker/counter ejector applications on corrugated boxfolding equipment, style BH-E20CC, provides specific friction needed for transporting blanks, without wearing quickly. Belt can be fingerspliced endless, or joined with Clipper or Alligator lacing. Cover is non-marking against any type of paper or container board.

Wire Belt Company Of America
Londonderry, NH 03053-7449
Mar 23, 2009 Accepted by USDA NSF/ANSI/3-A hygiene standards, CompactGrid® is hygienically designed to protect food processing products from contamination by deadly pathogens such as salmonella. Made of stainless steel with 70% open area, conveyor belt is designed to replace balanced weave belts and hard to clean plastic modular belts.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Feb 23, 2009 Designed for packaging industry, uni OWL belt features radius top design with nonstick surface that facilitates plastic film release and minimizes product contact for optimal and accelerated heating/cooling. Its 65% open design is suitable for applications with operating temperatures up to 356°F.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Feb 16, 2009 Developed for cooling conveyors in bakeries and other food applications, uni M-TTB CS, 0.5 in. pitch plastic modular belt features rounded bottom surface, making it suited for use with high-speed tight transfer conveyors. Belt features top curved surface and incorporates POM-D material with self-lubricating component that minimizes friction and optimizes nonstick characteristics. Cleaning is simplified by hygienic design of hinges.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Feb 02, 2009 Able to replace stainless steel wire mesh belts used in blanching, cooking, and steaming applications, uni BLB design combines plastic with stainless steel (SS). This ensures conveyed products, such as fragile fruits, vegetables, rice, and pasta, are only in contact with plastic while also ensuring belt has strength and high-temperature resistance of steel.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Nov 03, 2008 Measuring 3 mm in thickness, FDA and USDA compliant FAB-10EVCW (NVT-445) HySAN® cobalt blue belt comes with blank top side and negative pyramid on bottom. Oil and fat resistant food PVC conveyor belt features chemical resistance, adhesive free joint and blue color for visual inspection of food. It suits application in meat, poultry, fruit and vegetable, cheese and pizza industries.

Pyramid Inc.
Newton, IA 50208
Sep 17, 2008 Available to replace endless belts in diameters ranging from 3/32 to 9/16 in., Pyrathane® PC Belts eliminate need for disassembly when replacing belts on line shaft conveyors and many other applications. Belts are typically manufactured in black 83A durometer, but are also available in many other colors and durometers.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Jul 30, 2008 Suitable for applications where lower shaft loads or twisting is required, Hamid® MAM-3P has NBR covering on both sides to promote abrasion resistance and consistent grip. Longitudinal flexibility lends to resistance against flex-fatigue, while dimensional stability eliminates need for re-tensioning. Product utilizes adhesive-free Flexproof joining and is suited for use in mail sorting, packaging, printing, and paper processing industries.

Cambridge International, Inc.
Cambridge, MD 21613
May 30, 2008 Engineered with wide openings to facilitate cleaning, DURAFLEX(TM) food-safe metal conveyor belting is easily spliced and retrofits into any existing support bed configuration. Small diameter drive rolls/sprockets that are used with belt allow for tight transfers, reducing damage and loss of small delicate products. It is suited for range of food processing applications such as washing, breading, battering, coating, and frying.

Wire Belt Company Of America
Londonderry, NH 03053-7449
May 16, 2008 Designed for use with Flat-Flex® conveyor belts, C-CureEdge® C-shaped end loops provide maximum safety because they will not snag or tangle during shipment, storage, or installation. This diminishes opportunity for damage to conveyor and minimizes risk of accidents from sharp or burred open ends. No conveyor modifications or reconfigurations are required in drive components, shafting, or other parts on conveyor lines, and individual strand stress is reduced on outside edge of belt.

Fenner Precision
Manheim, PA 17545
Feb 22, 2008 Featuring curvilinear tooth profile, Fenner High Torque (FHT) belts are optimized for surface contact with pulley and uniform distribution of stress concentration. Profile helps reduce noise, dusting, backlash, and vibration. Available in various sizes and pitches including 1, 2, 3 and 5 mm, open ended or truly endless, belts exhibit tensile strengths exceeding 1,000 lb and can be customized to unique design requirements for conveying, motion control, and power transmission applications.

Dorner Mfg. Corp.
Hartland, WI 53029 0020
Feb 06, 2008 AquaPruf conveyor features ThermoDrive Sprocket Driven Hygienic Vertical Scoop Belt made from homogenous thermoplastic with no pins, hinges, or link joints to catch and foster bacteria. Features include tool-less tip-up pulley for quick release of belt tension, 30 sec dissasembly, and SS gear motor located outside food zone. System handles loads up to 20 lb/sq ft of belt with speeds up to 233 fpm.

Habasit AG
Postfach CH-4153 Reinach  Switzerland
Dec 31, 2007 Assembled with nylon or steel rods and driven by solid lug tooth sprockets, M6420 Flat Top Belt incorporates smart fit rod retaining system and features low-friction materials that minimize energy consumption and eliminate need for lubrication. Tensile strength rating of over 6,800 lb/ft and level of lateral stiffness combine to create stable conveying platform. With steel rod option, belt strength is maximized to ensure smooth operation on conveyor lengths to 300 ft.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Nov 29, 2007 Designed to alleviate problems associated with standard woven and non-woven PVC belts used in unit/package handling applications, Ulti-Mate S Series features rubber impregnated carcass, which minimizes PVC belt deterioration that causes black material to build up on rollers and slider beds. Belts also help prevent static discharges, which can shock employees and damage electronic components.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Nov 09, 2007 Suited for cooling crackers, chips, and tortillas, drying and draining fruits/vegetables, and breading meat/poultry, Model M1185 0.5 in. Flush Grid features Smart Fit rod design that provides maximum rod retention. It can be detected with common metal x-ray detectors used in food industry. Capable of transferring small product without damaging it, unit features open hinge design, large open area, and plastic construction.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Nov 07, 2007 Suited for light conveyor jobs in food applications, Habiblue thermoplastic round belt can be used in industries such as meat, cheese, pastries, and crackers. It features oil- and chemical-resistant composition TPU, polyurethane with resistance to hot water (belt does not absorb hot water and stretch), temperature resistance, and readily identifiable cobalt blue color.

Gates Mectrol, Inc.
Salem, NH 03079
Oct 15, 2007 Designed for food processing industry, PosiClean conveyor belt is USDA accepted for meat and poultry processing as well as dairy processing equipment. Belting can be cleaned-in-place to microbiological level, allowing food processors to minimize wastewater associated with traditional offline belt cleaning. It comes with smooth surface finish and accommodates positive drive that can carry heavy loads without slipping.

Richwood Industries, Inc.
Huntington, WV 25714
Sep 07, 2007 Installed as part of new swing arm sampler or retrofitted into existing one, Correct Cut(TM) System provides complete belt support profile for optimizing sampling quality, operating efficiency, and belt protection. It consists of Combi-Pact® Impact Saddle, which supports belt directly under swing arm cutter, and radius contour Cushion Arc® Idler on each side. System forms and supports belt in optimum position for complete sample collection and spillage reduction.