Goodyear Rubber Products Corp.
Akron, OH 44316
May 22, 2007 Made to ISO standard metric profiles, GY Metric v-belts are suitable for use with European or Asian manufactured equipment. Drop-in replacement belts are made from compounds reinforced with natural fibers such as cotton, and exposed rubber edge for pulley contact maximizes torque-carrying capacity. Operating in temperatures ranging from -65° to 180°F, they are available in 10, 13, 17, and 22 mm widths and 487-8,000 mm lengths.

Goodyear Tire & Rubber Company, The
Akron, OH 44316
Mar 06, 2007 Gatorback Sport Continuously Variable Transmission (CVT) belt features carbon fiber reinforcement in body construction for optimal stiffness across width of belt. Able to regulate itself under extreme events, belt design allows for desired edge slippage without losing top width. Suited for all-terrain vehicles (ATVs), belt also features Flexten aramid cords traveling circumference of belt to minimize stretch, stabilize overall length, and optimize horsepower transmission.

Goodyear Tire & Rubber Co., The
Akron, OH 44316
Jan 08, 2007 Available in straight-tooth, offset-tooth, or helical styles, Polyurethane Timing Belts suit linear motion, product conveyance, and power transmission applications. Steel-cord reinforced belts come in 3 configurations: open-end rolls in 325 ft lengths; welded or jointed belts made from roll material cut to length and spliced; and endless types made from long continuous cord with no splice or welding. To combat corrosion, Kevlar cord belts are available for high humidity applications.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Sep 22, 2006 With 1.5 in. pitch, Flex ONE side-flexing, plastic modular belt offers tight turning radii as low as 1.42 x belt width. Snap Link(TM) modules snap together for maintenance, and openings are minimized for maximum safety. Because there are no pin holes, all surfaces on belt are exposed for cleaning.

Pyramid Inc.
Newton, IA 50208
Aug 30, 2006 Manufactured to metric or inch requirements, PYRATHANE 88A Drive Belts are made of polyester-based polyurethane with Shore hardness of 88A. Round belts can be custom made with cross sectional diameters from .062-.562 in., while flat belts range from .030-.187 in. in thickness and in widths up to 1.500 in., both with no max length restriction. PYRATHANE belts provide quiet operation in small parts conveyors, instrumentation drives, and floor care equipment.

Flexible Steel Lacing Co.
Downers Grove, IL 60515-4200
Aug 15, 2006 Offered in widths of 24, 36, 48, and 60 in., Clipper® Roller Lacer® Gold Class(TM) can be driven by 18 V cordless drill or operated manually with handle or ratchet in emergency situations. Shelf supports belt and guides it into hook points during installation. It can be moved into loading position to speed insertion of belt. Lacer Face Strip eliminates need for locking lever and back-up extrusions. Slots enable user to slide face strip into tool for storage.

Ammeraal Beltech Modular (Uni-Chains)
Reading, PA 19611
Jun 16, 2006 Featuring one-piece design, 24 in. Single Link Model MPB has full-width molded link, eliminating bricklayed module butted ends. Design removes almost 11 ft, 2 in. of restricted access end surfaces within 20 ft conveyor. Through elimination of directional joints, bacteria growth and cleaning time are minimized.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Nov 18, 2005 Exhibiting tensile strength at break of 180,000 N/m, M5015 GripTop 2 in. pitch HabasitLINK® belt features Dynamic Gap hinge area that prevents build up of debris and ice in ski-lift and material handling operations. Underside of belt offers additional protection to hinge rod in abrasive applications, while smoothness provides proper sprocket engagement. Belt is offered in acetal white and polypropylene grey and white with black TPE rubber.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Sep 23, 2005 HabasitLINK® plastic modular belt, M1230 Flush Grid 0.5 in., features cross rib section that adds lateral stiffness and module flatness for conveying unstable products with tight transfers. Open area is suited for applications with small products where openings of 0.16 x 0.24 in. reduce chance of product falling through belt. Belt is available in standard material/color combinations: acetal dark grey, polypropylene white and grey, and polyethylene natural.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Jul 12, 2005 HabasitLINK® M5131 Raised Rib 2 in. modular, plastic belt is available in FDA- and EU-compliant polypropylene gray. To facilitate product transfers, combs are offered with short fingers for glass products and standard length fingers for PET bottles and steel and aluminum cans. Open area of 36% promotes optimal flow of water, while straight longitudinal ribs ensure product stability. Belt is designed for pasteurizers, warmers/coolers, and palletizers/depalletizers.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Jun 30, 2005 Available with or without carcass reinforcement, Hytrel® Flat Belts are flexible at temperatures as low as -40°F. Themoelastic polyester elastomer is abrasion- and tear- resistant with long-term fatigue resistance. It also offers resistance to microbes, weather, mineral oils, grease, water, alcohols, and glycols. Applications include drives, conveyors, vacuums, food processing, credit card transfer, and ATM bill ejectors.

Sandvik Steel
  Sweden
May 03, 2005 Model 1700SA stainless steel belt is available in thicknesses from 0.6–0.2 mm and widths from 100–1,000 mm, depending on thickness. Belts feature low deflection diameter that enables design of compact systems with small conveyor drums. Cold rolled and ground finishes are standard, and perforated, polished, PTFE, and Teflon™ coated surfaces are also available to suit applications in food processing, pharmaceutical, and electronics industries.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Mar 15, 2005 HabasitLINK® M2620 Flat Top Heavy 1 in. modular belt is 0.5 in. thick and meets industry criteria by offering abrasion resistance to broken glass particles. Belt is complimented by heavy-duty sprocket with duplex of drive teeth. Applications include palletizers/depalletizers, accumulation conveyors, mass handling lines, and case packing.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Jan 24, 2005 HabasitLINK plastic modular belt styles include Roller Top straight belts, Roller Top radius belts, and Clip-on Roller Top belts, which are available with transversal, 45° left, 45° right, and longitudinal roller rotation. Suited for various technical solutions and applications as well as accumulation and separation of products, belts offer minimal friction, wear, and power consumption. They incorporate free-rotating rollers with max load rating of ~4.500 N.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Dec 24, 2004 Used in material handling applications, M1220 GripTop 0.5 in. high-friction HabasitLINK plastic modular belt conveys products up inclines to 25°. Abrasion-resistant polypropylene belt is driven by universal 0.5 in. sprockets and has 0.63 in. nosebar diameter that facilitates tight transfers. Optimized for transport of boxes, crates, and paper-based products where conveyors operate 24 hr/day, product is also available with white food-quality rubber.

Gates Corporation
Denver, CO 80202
Dec 10, 2004 Eliminatorâ„¢ belt, engineered to replace RPP® tooth profile belts of same width and comparable length, run on existing RPP sprockets and idlers with same tension as original belt. Polyurethane synchronous belts with green tooth color are available in 8 mm pitch size with 12, 22, 35, and 60 mm widths; 26 belt lengths; and 104 part numbers, or 14 mm pitch size with 20, 42, 65, 90, and 120 mm widths; 16 belt lengths; and 80 part numbers.

Flexible Steel Lacing Co.
Downers Grove, IL 60515-4200
Dec 10, 2004 Clipper Microlacer® is designed for on-site, manual installation of Clipper® Wire Hook Lacing in light-duty conveyor belts. Lacer guide blocks span full lacer head width, and face-strip locking is done via knurled knob that allows finger tightening. Also included, offset drive handle enables one-handed installation. Tool accommodates belt widths up to 14 in. with one set-up and features continuous lacing capability for belts wider than lacer width.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Nov 04, 2004 Available in the FDA-conforming polypropylene and polyacetal, HabasitLINK® M3843 Tight Radius 1.5 in. Belt minimizes both polygon effect endemic to modular belts and size gap between adjacent conveyors. With collapse factor of 1.6, side-flexing belt allows extreme tight turns. T-bar design of individual module's cross rib imparts high lateral stiffness. With open area of 37% and open contact area of 65%, belt provides generous passages for cooling air or draining water.

Flexco
Downers Grove, IL 60515-4200
Oct 28, 2004 Sized to accommodate belt widths to 14 in. with one set-up, Clipper Microlacer® is suited for on-site, manual installation of Clipper® Wire Hook Lacing in light-duty conveyor belts. Lacer head enables tool to tightly embed lacing hooks deep into belt for optimized holding strength and minimal wear on splice-contacting conveyor components. Face-strip locking is done with knurled knob that allows for finger tightening, and offset drive handle enables one-handed operation.

Intralox, Inc.
Harahan, LA 70123-5395
Oct 25, 2004 Spiral Belt Series 2700 is designed with small surface openings for conveying small poultry products, such as fajita meat, nuggets, or popcorn-style chicken. Suited for breading and tight transfer applications, Series 1500 Flush Grid Belt is available in metal detectable material for light-duty applications where food safety is critical. Clean-In-Place System features angled sprockets for thorough cleaning.