Uni-Chains Manufacturing Inc.
Reading, PA 19611
Jun 12, 2006 Offered in widths from 3.0-118.8 in., Model X-MPB features 2.5 in. pitch and heavy-duty design that allows for impact without breakage. Sprockets are available with 6, 8, 10, or 13 teeth, providing optimal belt engagement for long conveyors. Made of FDA-approved plastic material, belt includes lockpin system to facilitate maintenance.

Flexible Steel Lacing Co.
Downers Grove, IL 60515-4200
May 26, 2006 Available in Medium and Large models, portable Flex-Lifter(TM) safely lifts fully loaded troughed or flat conveyor belts from underneath using adjustable wings or return lift bar, respectively. Beltline maintenance tool, designed for belt widths from 36-60 in. (Medium) and 48-72 in. (Large), raised to max vertical lift heights of 14 and 16 in. Made of anodized aluminum, units can be operated by ratchet, drill motor, or impact wrench.

Intralox, Inc.
Harahan, LA 70123-5395
May 25, 2006 Suited for conveyor applications where sanitation is critical, Series 850 SeamFree(TM) Minimum Hinge Flat Top is drive bar driven to prevent debris from being pressed into hinge area. EZ Clean product, constructed with minimal hinges, also has flume design on belt underside that channels debris away from belt edge. Molded from non-porous, non-absorbent plastics product has 36 in. wide seamless plastic module and no pockets or recessed areas in underside that can harbor debris.

Wire Belt Company Of America
Londonderry, NH 03053-7449
Mar 29, 2006 Designed to handle small, delicate products, Compact Grid(TM) is engineered with 70% open surface area, making it suited for processes in which product coating, drainage, and liquid or air circulation are factors. Open stainless steel design facilitates cooking operations such as frying and baking as well as cooling freshly baked or freshly fried products in high-volume, high-throughput processes.

Uni-Chains Manufacturing Inc.
Reading, PA 19611
Feb 24, 2006 Utilizing Snap Link(TM) technology, uni M-PNB M1 belt modules snap together for assembly/disassembly. Pin-less construction facilitates process of changing stained or damaged sections and eliminates crevices and pin holes that would cause sterility and cleaning challenges. Belting has ½ in. pitch design with 40% open mesh surface and smooth running, level underside. Applications include bakeries, cooling conveyors, and food processing.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Feb 03, 2006 Truly endless (BFX) polyurethane timing belts utilize bifilar design that represents tension member arrangements with left hand and right hand lay. Tension members alternate to prevent formation of lateral forces, balancing timing belts for true tracking. Bifilar technology minimizes friction forces, lending to positioning accuracy in belt drives. It also improves pitch stability by minimizing deviation of timing belt materials.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Jan 25, 2006 Made of cellular rubber, red colored LINAFOAM is available in thicknesses of 6, 10, and 12 mm. Possessing high coefficient of friction and elasticity, polyurethane foam is resistant to abrasions, cuts, and tears. It also has sound-absorbing, and shock- and noise-dampening qualities.

FormPak, Inc.
Saint Louis, MO 63133
Jan 11, 2006 Multi-tilting conveyor bed enables automatic ejection of full bulk bags from holder arm style filling frames. Incorporating air bladders and hinges, design eliminates need to drop entire fill head and holder arm assembly. Product is adjustable by one operator, without tools or lifts, and can be integrated into existing holder arm style machines to make them automatic discharge units.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Dec 21, 2005 With change of profile set-up, ATN® connection technology allows different size goods to be conveyed with same timing belt. Profiles, fastened to timing belt via nylon, brass, or stainless steel inserts, can be converted, interchanged, or reconfigured with hand tools. Allowable tensile load for ATN 10 and ATN 12.7 tooth pitch polyurethane timing belts is up to 337.2 lb, and convertible profiles can be attached in increments of one tooth.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Dec 06, 2005 Made of Kevlar-reinforced polyurethane, Series A6B16-D offers positive, non-slip power transmission without vibration, chatter, or backlash. Double-sided tooth action enables belts to wind between pulleys to synchronize shaft rotations. Capable of operating in temperatures from 0-180°F, and intermittently to 248°F, belts are available in widths of 1/8, 3/16, ¼, and 3/8 in. with 132-500 grooves/belt and pitch lengths from 10.56-40.00 in.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Dec 06, 2005 Offered in ¼, 5/16, and 3/8 in. widths, Series A 6G3, A 6B3, and A 6R3 feature .200 in. pitch and molded teeth on one side for positive power transmission without slip, vibration, or backlash. Small pitch belts can wind around number of small pulleys to permit multifunction operation in synchronizing shaft rotations. With 20-590 grooves and pitch lengths from 4-118 in., belts come in polyurethane with polyester cord, polyurethane with Kevlar cord, and neoprene.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Dec 06, 2005 Made of nylon-covered, fiberglass-reinforced neoprene, A 6R3-C timing belt stock can be spliced to suit designs where nonstandard endless belts are not available. It comes in 3 belt widths and operates continuously in temperatures from -30 to +185°F. Produced with 1/5 in. pitch and trapezoidal teeth on one side, product provides positive, non-slip power transmission without vibration, tool chatter, or backlash. It can also wind between pulleys to synchronize shaft rotations.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Nov 18, 2005 Exhibiting tensile strength at break of 180,000 N/m, M5015 GripTop 2 in. pitch HabasitLINK® belt features Dynamic Gap hinge area that prevents build up of debris and ice in ski-lift and material handling operations. Underside of belt offers additional protection to hinge rod in abrasive applications, while smoothness provides proper sprocket engagement. Belt is offered in acetal white and polypropylene grey and white with black TPE rubber.

Uni-Chains Mfg., Inc.
Reading, PA 19611
Oct 13, 2005 Offered with 1 in. pitch to allow tight transfer, S-MPB Single Link(TM) belting is designed to reduce bacteria growth and optimize cleaning. Features include 0.20 in. pin dia, standard belt width of 20 in., backflex radius of 0.91 in., and lockpin locking system. Smaller width belts are available on request. Plastic belt has been issued the USDA Equipment Acceptance Certificate for meeting the NSF-3A-14159-003 hygiene requirements standard in meat and poultry processing.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Sep 23, 2005 HabasitLINK® plastic modular belt, M1230 Flush Grid 0.5 in., features cross rib section that adds lateral stiffness and module flatness for conveying unstable products with tight transfers. Open area is suited for applications with small products where openings of 0.16 x 0.24 in. reduce chance of product falling through belt. Belt is available in standard material/color combinations: acetal dark grey, polypropylene white and grey, and polyethylene natural.

Flexible Steel Lacing Co.
Downers Grove, IL 60515-4200
Aug 11, 2005 Flexco® R9S Scalloped Edgeâ„¢ Fasteners feature 8-rivet attachment for high-tension belts with mechanical fastener ratings up to 2,000 PIW. Stamped from 0.135 in. 300 series stainless steel, units accommodate belt thicknesses from 15/32–1 in. running on conveyors with minimum end-pulley diameter of 42 in. Fasteners grip belt end between top and bottom plates, are 1½ in. wide and joined at one end by 2 hinge loops sized to accept 5/8 or 3/4 in. dia hinge pins.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Jul 14, 2005 Constructed of abrasion-resistant polyurethane and steel or stainless steel tension members, ARC-POWER PLUS belts are available as open-ended, spliced and welded endless, and truly endless. They provide 100% tracking in both running directions without flanges. Based on overlapping tooth arrangement, smooth interaction with idler and tensioners running on toothed side of timing belt eliminates tooth jumping.

Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Jul 12, 2005 HabasitLINK® M5131 Raised Rib 2 in. modular, plastic belt is available in FDA- and EU-compliant polypropylene gray. To facilitate product transfers, combs are offered with short fingers for glass products and standard length fingers for PET bottles and steel and aluminum cans. Open area of 36% promotes optimal flow of water, while straight longitudinal ribs ensure product stability. Belt is designed for pasteurizers, warmers/coolers, and palletizers/depalletizers.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Jun 30, 2005 Available with or without carcass reinforcement, Hytrel® Flat Belts are flexible at temperatures as low as -40°F. Themoelastic polyester elastomer is abrasion- and tear- resistant with long-term fatigue resistance. It also offers resistance to microbes, weather, mineral oils, grease, water, alcohols, and glycols. Applications include drives, conveyors, vacuums, food processing, credit card transfer, and ATM bill ejectors.

Sandvik Steel
  Sweden
May 03, 2005 Model 1700SA stainless steel belt is available in thicknesses from 0.6–0.2 mm and widths from 100–1,000 mm, depending on thickness. Belts feature low deflection diameter that enables design of compact systems with small conveyor drums. Cold rolled and ground finishes are standard, and perforated, polished, PTFE, and Teflon™ coated surfaces are also available to suit applications in food processing, pharmaceutical, and electronics industries.