Habasit America (formerly Habasit Belting)
Suwanee, GA 30024
Aug 24, 2007 Featuring flat top and 1 in. pitch, M2470 plastic modular belting can be used in place of rollers. Design promotes surface load distribution, minimizing stresses, and scalloped belt module edge produces minimal to no vibration for stack stability. Along with belt/sprocket engagement designed for pulling heavier sheet stacks, belt features abrasion-resistant, closed belt edges and smooth surface with beveled edges to facilitate side transfer.

Uni-Chains Manufacturing Inc.
Reading, PA 19611
Aug 01, 2007 Open top uni SNB M2 20% includes lockpin feature for cleanability and has flat surface allowing gentle transport of sensitive products. Suited for incline conveyors, 1 in. pitch belt has products supports with slotted/open hinges for drainage. Applications include meat cooling and freezing lines, pasta blanchers, pasteurizers, can mass handing, and bakery.

Uni-Chains Manufacturing Inc.
Reading, PA 19611
Jul 26, 2007 Offering 1 in. pitch, SNB M2 rubber top plastic modular belt is straight-running and suited for inclined transportation of products where drainage is of concern. Product is also available with white rubber top, which carries FDA approval for direct food contact. Other applications include bakery, bottling, canning, corrugated, meat, poultry, and fruits/vegetables.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
May 31, 2007 ATS 15 timing belts are designed for power transmission and linear drive applications that require high tensile strength and flexibility. They are available in 25, 32, 50, 75, 100, and 150 mm belt widths and come in open-ended 50 or 100 m rolls, welded or in truly endless technology. Tension members are available in steel and stainless steel.

Goodyear Rubber Products Corp.
Akron, OH 44316
May 22, 2007 Made to ISO standard metric profiles, GY Metric v-belts are suitable for use with European or Asian manufactured equipment. Drop-in replacement belts are made from compounds reinforced with natural fibers such as cotton, and exposed rubber edge for pulley contact maximizes torque-carrying capacity. Operating in temperatures ranging from -65° to 180°F, they are available in 10, 13, 17, and 22 mm widths and 487-8,000 mm lengths.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
May 18, 2007 Designed for T10 and AT10 pitch timing belts, Mechanical Connection System allows for access to shafts and pulleys without disassembling machinery parts. Finger spliced ends of timing belt are prepared to be clamped together with connecting kit hardware, which consists of carbon fiber reinforced polyamide connecting plates and tooth inserts, including screws.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Mar 28, 2007 Steel, stainless steel, and Kevlar® reinforced timing belts are available with injection molded profiles constructed of polyurethane materials in several durometers. Selection of profile style is determined by type of product to be conveyed and general machinery design. While 3,000+ stock profiles are available, company also supplies custom designs and configurations with integrated metal components such as plates, threaded inserts, screws, and magnets.

Intralox, Inc.
Harahan, LA 70123-5395
Mar 21, 2007 Designed to meet hygiene and sanitation requirements in food industries, Series 1650 SeamFree(TM) Minimum Hinge Flat Top Belt consists of 18 in. modules that create smooth upper surface with fully flush edges and recessed rods. Flume design and drive bar mechanism effectively channel water and debris to belt edges, preventing sprockets from pressing debris into hinges. Belt enables transfers as tight as 1.5 in.

Goodyear Tire & Rubber Company, The
Akron, OH 44316
Mar 06, 2007 Gatorback Sport Continuously Variable Transmission (CVT) belt features carbon fiber reinforcement in body construction for optimal stiffness across width of belt. Able to regulate itself under extreme events, belt design allows for desired edge slippage without losing top width. Suited for all-terrain vehicles (ATVs), belt also features Flexten aramid cords traveling circumference of belt to minimize stretch, stabilize overall length, and optimize horsepower transmission.

Dorner Mfg. Corp.
Hartland, WI 53029 0020
Jan 10, 2007 With 6-60 mm high cleats physically molded into belt, AquaPruf 7600 Series End Drive Conveyors feature sanitary design suitable for handling difficult products such as jelly beans, apples, marinated chicken, and chips. Units have continuous TIG welded 304 SS frame with no horizontal surfaces for optimal cleaning. Available in lengths from 36 in. to 40 ft and widths up to 2 ft, conveyors offer speeds to 328 fpm and handle loads up to 20 lb/sq-ft of belt.

Goodyear Tire & Rubber Co., The
Akron, OH 44316
Jan 08, 2007 Available in straight-tooth, offset-tooth, or helical styles, Polyurethane Timing Belts suit linear motion, product conveyance, and power transmission applications. Steel-cord reinforced belts come in 3 configurations: open-end rolls in 325 ft lengths; welded or jointed belts made from roll material cut to length and spliced; and endless types made from long continuous cord with no splice or welding. To combat corrosion, Kevlar cord belts are available for high humidity applications.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Nov 08, 2006 Hytrel® HT Elastic 40+ Silicone Belt is specifically designed to position and convey PVC cards in card printers, card readers, and card handling devices, avoiding any slippage. Silicone coated carrying side of belt provides adhesion of cards in vertical belt drive designs. For tracking reasons, longitudinal belt tracking guides can be implemented. Belt length, width, and thickness can be made to suit application requirements.

Wire Belt Company Of America
Londonderry, NH 03053-7449
Nov 03, 2006 With 76% of open surface, Model TC-327 conveyor belt allows convection and air flow in tortilla cooling conveyor line. Stainless steel design keeps belt from stretching, sagging, or creating fire hazards in high heat operations, while C-CureEdge(TM) closed loop ends ensure safety in production environment. Product is packaged with EZSplice(TM) system that includes pliers kit and sprockets.

Uni-Chains Manufacturing Inc.
Reading, PA 19611
Sep 22, 2006 With 1.5 in. pitch, Flex ONE side-flexing, plastic modular belt offers tight turning radii as low as 1.42 x belt width. Snap Link(TM) modules snap together for maintenance, and openings are minimized for maximum safety. Because there are no pin holes, all surfaces on belt are exposed for cleaning.

Pyramid Inc.
Newton, IA 50208
Aug 30, 2006 Manufactured to metric or inch requirements, PYRATHANE 88A Drive Belts are made of polyester-based polyurethane with Shore hardness of 88A. Round belts can be custom made with cross sectional diameters from .062-.562 in., while flat belts range from .030-.187 in. in thickness and in widths up to 1.500 in., both with no max length restriction. PYRATHANE belts provide quiet operation in small parts conveyors, instrumentation drives, and floor care equipment.

Flexible Steel Lacing Co.
Downers Grove, IL 60515-4200
Aug 15, 2006 Offered in widths of 24, 36, 48, and 60 in., Clipper® Roller Lacer® Gold Class(TM) can be driven by 18 V cordless drill or operated manually with handle or ratchet in emergency situations. Shelf supports belt and guides it into hook points during installation. It can be moved into loading position to speed insertion of belt. Lacer Face Strip eliminates need for locking lever and back-up extrusions. Slots enable user to slide face strip into tool for storage.

BRECOflex Co., L.L.C.
Eatontown, NJ 07724
Jul 21, 2006 Hytrel® HT Elastic 40+ Silicone belt is used to position and convey PVC cards, without any slippage, in card printers, card readers, and card handling devices. It offers strong adhesion in conjunction with PVC Cards at carrying side and smooth surface at running side. Longitudinal belt tracking guides can be implemented, and length, width, and thickness can be made to suit any application. Belt is made without carcass and can be used with fixed shaft centers.

Uni-Chains Manufacturing Inc.
Reading, PA 19611
Jun 16, 2006 Featuring one-piece design, 24 in. Single Link Model MPB has full-width molded link, eliminating bricklayed module butted ends. Design removes almost 11 ft, 2 in. of restricted access end surfaces within 20 ft conveyor. Through elimination of directional joints, bacteria growth and cleaning time are minimized.

Uni-Chains Manufacturing Inc.
Reading, PA 19611
Jun 12, 2006 Featuring 2.5 in. pitch, uni XLB K318 can replace roller chains, drag chains, steel flat top belts, and other types of chains/belts used in heavy-duty applications. Belt is impact-resistant, wear-resistant, and bi-directional. With positive sprocket drive, full synchronized movement of parallel lanes is ensured. Used on skid conveyors, belt requires no lubrication and is suited for automotive, carwash, palletizing, and paper and cardboard industry.

Uni-Chains Manufacturing Inc.
Reading, PA 19611
Jun 12, 2006 Offered in widths from 3.0-118.8 in., Model X-MPB features 2.5 in. pitch and heavy-duty design that allows for impact without breakage. Sprockets are available with 6, 8, 10, or 13 teeth, providing optimal belt engagement for long conveyors. Made of FDA-approved plastic material, belt includes lockpin system to facilitate maintenance.