|
|
Advertisement
|
|
Mechanical Power Transmission ->
Belts
Belts
(Showing headlines 1 - 20) more ....
|
 Flexible Couplings feature neoprene center.Power Drive Components, Inc.
Plainview, NY 11803
Jul 02, 2008
With Bello Superflex Ribbed Couplings, application engineers can select size where peak torque exceeds application torque X service factors. Units feature AL alloy 2011T3 and 303 stainless steel hubs and offer complete range of bores in clamp styles, suited for power transmission applications.
|
Metal Conveyor Belt can be spliced in 30 sec.Cambridge International, Inc.
Cambridge, MD 21613
May 30, 2008
Engineered with wide openings to facilitate cleaning, DURAFLEX(TM) food-safe metal conveyor belting is easily spliced and retrofits into any existing support bed configuration. Small diameter drive rolls/sprockets that are used with belt allow for tight transfers, reducing damage and loss of small delicate products. It is suited for range of food processing applications such as washing, breading, battering, coating, and frying.
|
 Conveyor Belt End Loops increase operational safety.Wire Belt Company Of America
Londonderry, NH 03053-7449
May 16, 2008
Designed for use with Flat-Flex® conveyor belts, C-CureEdge® C-shaped end loops provide maximum safety because they will not snag or tangle during shipment, storage, or installation. This diminishes opportunity for damage to conveyor and minimizes risk of accidents from sharp or burred open ends. No conveyor modifications or reconfigurations are required in drive components, shafting, or other parts on conveyor lines, and individual strand stress is reduced on outside edge of belt.
|
 Non-Marking Timing Belt minimizes dust generation.York Industries
Garden City Park, NY 11040
Apr 10, 2008
Constructed of high flex plastic over hardened fiberglass cord, TruMotion® Timing Belt is available in 2 mm GT, 3 mm GT, 3mm HTD, 5 mm HTD, .080 in., 1/5 in., and 3/8 in. pitches. Tooth surfaces have outer layer of nylon for wear resistance and quiet operation. Operating from -40 to 220°F, belt is corrosion- and abrasion-resistant, making it suitable for office automation, medical equipment, laboratory equipment, and DC stepper/servo devices.
|
Synchronous Belts are made of polyurethane.Fenner Precision
Manheim, PA 17545
Feb 22, 2008
Featuring curvilinear tooth profile, Fenner High Torque (FHT) belts are optimized for surface contact with pulley and uniform distribution of stress concentration. Profile helps reduce noise, dusting, backlash, and vibration. Available in various sizes and pitches including 1, 2, 3 and 5 mm, open ended or truly endless, belts exhibit tensile strengths exceeding 1,000 lb and can be customized to unique design requirements for conveying, motion control, and power transmission applications.
|
 Non-Marking Drive Belt minimizes noise and dust.Gates Corporation
Denver, CO 80202
Feb 12, 2008
Featuring nylon tooth surface that minimizes dust accumulation, PowerGrip® TruMotion® Belt provides durable wear surface for medical instrumentation, office automation, electronics, and banking. Three tooth profile options, including timing, HTD, and curvilinear, all offer exact meshing characteristics for elimination of tooth slip. Hardened fiberglass tensile cords resist elongation, while polymer compound body handles temperatures from -40 to +220°F.
|
 Sanitary Conveyor features vertical scoop belting.Dorner Mfg. Corp.
Hartland, WI 53029 0020
Feb 06, 2008
AquaPruf conveyor features ThermoDrive Sprocket Driven Hygienic Vertical Scoop Belt made from homogenous thermoplastic with no pins, hinges, or link joints to catch and foster bacteria. Features include tool-less tip-up pulley for quick release of belt tension, 30 sec dissasembly, and SS gear motor located outside food zone. System handles loads up to 20 lb/sq ft of belt with speeds up to 233 fpm.
|
 Plastic Modular Conveyor Belt suits heavy-duty applications.Habasit AG
Postfach CH-4153 Reinach Switzerland
Dec 31, 2007
Assembled with nylon or steel rods and driven by solid lug tooth sprockets, M6420 Flat Top Belt incorporates smart fit rod retaining system and features low-friction materials that minimize energy consumption and eliminate need for lubrication. Tensile strength rating of over 6,800 lb/ft and level of lateral stiffness combine to create stable conveying platform. With steel rod option, belt strength is maximized to ensure smooth operation on conveyor lengths to 300 ft.
|
 Timing Belts feature polymer-free nylon tooth facing.SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Dec 13, 2007
Providing full tooth-to-pulley contact, PowerGrip® TruMotion(TM) Timing Belts feature durable facing that minimizes noise and dust. Cream-colored polymer compound body can withstand extreme high and low temperatures ranging from -40 to +220°F. Fiberglass tensile cords ensure resistance to elongation. Compliant with RoHS, belts are suited for ATMs, cash registers, money counting machines, coin sorting, copiers, fax machines, printers, and medical equipment.
|
Non-Woven Belts target material handling market.Habasit Belting, Inc.
Suwanee, GA 30024
Nov 29, 2007
Designed to alleviate problems associated with standard woven and non-woven PVC belts used in unit/package handling applications, Ulti-Mate S Series features rubber impregnated carcass, which minimizes PVC belt deterioration that causes black material to build up on rollers and slider beds. Belts also help prevent static discharges, which can shock employees and damage electronic components.
|
 Conveyor Belt is constructed of detectable material.Habasit Belting, Inc.
Suwanee, GA 30024
Nov 09, 2007
Suited for cooling crackers, chips, and tortillas, drying and draining fruits/vegetables, and breading meat/poultry, Model M1185 0.5 in. Flush Grid features Smart Fit rod design that provides maximum rod retention. It can be detected with common metal x-ray detectors used in food industry. Capable of transferring small product without damaging it, unit features open hinge design, large open area, and plastic construction.
|
 Conveyor Belts comply with FDA regulations.Habasit Belting, Inc.
Suwanee, GA 30024
Nov 07, 2007
Suited for light conveyor jobs in food applications, Habiblue thermoplastic round belt can be used in industries such as meat, cheese, pastries, and crackers. It features oil- and chemical-resistant composition TPU, polyurethane with resistance to hot water (belt does not absorb hot water and stretch), temperature resistance, and readily identifiable cobalt blue color.
|
 Food Grade Conveyor Belt is reinforced with Kevlar® cord.Gates Mectrol, Inc.
Salem, NH 03079
Oct 15, 2007
Designed for food processing industry, PosiClean conveyor belt is USDA accepted for meat and poultry processing as well as dairy processing equipment. Belting can be cleaned-in-place to microbiological level, allowing food processors to minimize wastewater associated with traditional offline belt cleaning. It comes with smooth surface finish and accommodates positive drive that can carry heavy loads without slipping.
|
 Belts provide safety for underground miners.Capital Safety
Red Wing, MN 55066-5005
Oct 08, 2007
PROTECTA miners' belts consist of lightweight waist belt for support; detachable PVC-coated straps for secure attachment of vital tools such as battery packs and self rescuers; and reflective tape for visibility and safety underground. Belts are available as model AB001AU as well as AB002AU, which also features braces for extra support, allowing even distribution of weight from loaded belt over shoulders, back, chest, and hips.
|
Belt Support System works with any swing arm sampler.Richwood Industries, Inc.
Huntington, WV 25714
Sep 07, 2007
Installed as part of new swing arm sampler or retrofitted into existing one, Correct Cut(TM) System provides complete belt support profile for optimizing sampling quality, operating efficiency, and belt protection. It consists of Combi-Pact® Impact Saddle, which supports belt directly under swing arm cutter, and radius contour Cushion Arc® Idler on each side. System forms and supports belt in optimum position for complete sample collection and spillage reduction.
|
 Incline Conveyor Accessory optimizes capacity, belt life.Habasit Belting, Inc.
Suwanee, GA 30024
Aug 24, 2007
Offered as accessory for incline conveyors, M2510 is 3 in. high scoop flight release is engineered to enhance throughput and optimize use of plant space. Scoop increases plastic modular belt carrying capacity, allowing for reduced conveyor speeds while reducing product damage. Suited for carrying light product up inclines, acessory compliments HabasitLINK® M2510 belt style.
|
 Plastic Modular Belt is designed for corrugated industry.Habasit Belting, Inc.
Suwanee, GA 30024
Aug 24, 2007
Featuring flat top and 1 in. pitch, M2470 plastic modular belting can be used in place of rollers. Design promotes surface load distribution, minimizing stresses, and scalloped belt module edge produces minimal to no vibration for stack stability. Along with belt/sprocket engagement designed for pulling heavier sheet stacks, belt features abrasion-resistant, closed belt edges and smooth surface with beveled edges to facilitate side transfer.
|
 Open Modular Conveyor Belt is FDA-approved for food contact.Uni-Chains Manufacturing Inc.
Reading, PA 19611
Aug 01, 2007
Open top uni SNB M2 20% includes lockpin feature for cleanability and has flat surface allowing gentle transport of sensitive products. Suited for incline conveyors, 1 in. pitch belt has products supports with slotted/open hinges for drainage. Applications include meat cooling and freezing lines, pasta blanchers, pasteurizers, can mass handing, and bakery.
|
 Modular Conveyor Belt is constructed with rubber top.Uni-Chains Manufacturing Inc.
Reading, PA 19611
Jul 26, 2007
Offering 1 in. pitch, SNB M2 rubber top plastic modular belt is straight-running and suited for inclined transportation of products where drainage is of concern. Product is also available with white rubber top, which carries FDA approval for direct food contact. Other applications include bakery, bottling, canning, corrugated, meat, poultry, and fruits/vegetables.
|
Timing Belt has 15 mm pitch design.BRECOflex Co., L.L.C.
Eatontown, NJ 07724
May 31, 2007
ATS 15 timing belts are designed for power transmission and linear drive applications that require high tensile strength and flexibility. They are available in 25, 32, 50, 75, 100, and 150 mm belt widths and come in open-ended 50 or 100 m rolls, welded or in truly endless technology. Tension members are available in steel and stainless steel.
|
(Showing headlines 1 - 20) more ....
|
Latest Products in the News |
Habasit America - February 11, 2008 Silicone Coated Food Belts Press Release
Delphax Technologies Inc. - September 24, 2007 Delphax to Demonstrate CR2200 Continuous-Roll Digital Print Total Book Solution at MBO America Innovation Days Open House, Nov. 7-9
Fenner Precision - August 17, 2007 Fenner Precision Products Bring Quality Performance to Photocopier Industry
Fenner Precision - August 15, 2007 Fenner Precision Introduces High-Friction Polyurethane to Belt Product Line
Fenner Precision - August 1, 2007 Fenner Precision Announces UL 94HB Approval for EPDM StretchBands(TM)
Uni-Chains Manufacturing Inc. - July 24, 2007 XLB Rough Top (15% Open) Belting
More Products in the News...
|
|
|