Sleeve & Insert Bearings

Mechanical Power Transmission

Split Roller Bearings are engineered for long life, capacity.

January 24, 2013

Bearings of medium-duty 01E and heavy-duty 02E Series are completely split to shaft, eliminating need to disassemble all components on shaft for service or replacement. Interchangeable with Cooper 01 and 02 Series bearings, 01E and 02E bearings have internal geometry that promotes L10 life expectancy as well as radial and axial load ratings. With brass cages that accommodate underground applications and challenging environments, bearings are available with bore sizes from 6.5–12 in. Read More

Mechanical Power Transmission

Triangle Develops Cost-Reduced Cushioned HVAC Bearings for Evaporative Cooler Applications

August 16, 2012

The NAH10A is an example of Triangle's line of cushioned bearings that suppress vibrations in an array of HVAC applications, including evaporative coolers. Triangle is an indispensable supplier for swamp cooler and HVAC manufacturers in the Middle East, due to their durable cushioned pillow block mounted bearings. They are currently developing a bronze alloy sleeve bearing in response to...Read More

Materials & Material Processing, Mechanical Power Transmission

Victrex WG(TM) Polymer Increases Lifetime of Sliding Bushing in Automotive Water Pump Impeller

April 19, 2012

WEST CONSHOHOCKEN, PA, USA - (April 10, 2012) - Automobile manufacturers are feeling the pressures of obtaining improved fuel economy and lowering maintenance costs for owners. One solution that automotive engineers developed is to use smaller, high-output engines to reduce weight. The materials specified for these smaller engines must be able to maintain properties at high temperatures...Read More

Mechanical Power Transmission

Flanged Sleeve Bearings feature maintenance-free design.

April 2, 2012

Available in 44 models, Frelon®-lined Flanged Sleeve Bearings include BSLFLN-PF Series in inch sizes and BSLFLNM Series in metric sizes. Self-lubricating units fit shafts ranging from .1890-3.0015 in./6.028-50.062 mm diameter and are designed to replace sintered and plastic bearings. Overall diameter of flanges ranges from .4370-3.5000 in. Read More

Mechanical Power Transmission

Flanged Sleeve Bearings are designed to be maintenance-free.

January 24, 2012

Identified as BSLFLN-PF... Series in inch sizes and BSLFLNM... Series in metric sizes, 44 Frelon® lined flanged sleeve bearings are designed to replace sintered and plastic bearings. These self-lubricating products are made to fit shafts from .1890-3.0015 in. dia (6.028-50.062 mm) and feature flange ODs from .4370-3.5000 in. (14-70 mm). Read More

Mechanical Power Transmission

Hybrid Linear Bearing reduces friction in machine guard doors.

December 11, 2009

Combining rolling and sliding motions, DryLin® WJRM bearing is designed to reduce driving force in applications involving adjustment of machine-guard doors, partitions, and adjustable locks or light handling tasks. Self-lubricating, plastic sliding sleeve bearing ensures dirt and moisture resistance, while maintenance-free polymer roller enhances usability in applications where doors up to 110 lb have to be adjusted manually. Read More

Mechanical Power Transmission

Split Spherical Roller Bearings help reduce maintenance and downtime.

October 23, 2009

Split spherical roller bearings are useful when several solid spherical roller bearings are being used to support complex drive shaft or where bearing needs replacing but is located in tight space on machine. With 620 mm dia and 210 kg weight, bearings have split design that enables mounting into existing housing without removal of transmission shaft. Inner ring, outer ring, and cage assembly are split, and cylindrical bore provides direct mounting onto shaft. Read More

Mechanical Components & Assemblies, Mechanical Power Transmission

Wrap adds abrasion resistance to hoses already installed.

September 10, 2009

Lightweight and flexible, Partek Wrap is made from urethane-coated 1050 ballistic nylon with tight weave pattern that prevents fabric ends from fraying when cut. Abrasion-resistant sleeve can be used to bundle multiple hoses/cables together or to protect cylinder rods from damage and contamination. Available in 4 models with circumferences from 9.40-22.00 in., wrap comes on 50 ft roll and has ambient temperature range of -60 to 200°F. Read More

Fasteners & Hardware, Mechanical Power Transmission

Flanged Sleeve Bearings feature dual seal construction.

May 18, 2009

Set screw type and locking collar type, BBXINS series are available in various sizes to fit shafts ranging from ½ to 4 in. in dia. Set screw type bearing inserts have 2 set screws which contacts/locks shaft to bearing so that the two will turn as one. With widths ranging from 0.5512-1.5748 in., bearing inserts suit applications in textile machinery, conveyor systems, ventilators, as well as machines for food processing and packing. Read More

Fasteners & Hardware, Mechanical Components & Assemblies, Mechanical Power Transmission

Low Cost Bearings for High-speed Scanning

February 10, 2009

EAST PROVIDENCE, R.I. - January 29, 2009 - Imaging Business Machines LLC (IBML) uses iglide polymer plain bearings in its line of intelligent document-scanning platforms. The low-cost, self-lubricating bushings withstand the paper dust created by the scanners and the six-day, 24-hour operation schedules frequently demanded of them. IBML's main goal is to ensure organizations-such as financial...Read More

Mechanical Power Transmission

Polymer Bearings damp out noise and vibration.

October 31, 2002

Nyliner® engineered polymer bearings are available in 7 sleeve, flanged, and snap-in types. They are offered in 225 standard millimeter and inch sizes, with inside dimensions ranging from 3/16 to 1½ in. Injection molded Nyliner bearings provide smooth, quiet operation, are corrosion-resistant, and do not require lubrication. Read More

Mechanical Power Transmission

Ball Bearing offers concentric mounting.

October 14, 2002

ConCentra Air Handling Ball Bearing Unit employs multi-step sleeve arrangement to form near 360° interference fit with shaft. Concentric fit reduces noise and vibration and leaves no gaps between shaft and bearing bore, reducing risk of fretting corrosion. Two-part sealing arrangement, consisting of low-friction contact seal and phosphated metallic flinger, prevents solid and liquid contaminants from entering bearing cavity. Unit comes in bore sizes from 1 to 2 15/16 in. Read More