Wire Belt Company Of America    Londonderry, NH 03053-7449
Nov 03, 2006 With 76% of open surface, Model TC-327 conveyor belt allows convection and air flow in tortilla cooling conveyor line. Stainless steel design keeps belt from stretching, sagging, or creating fire hazards in high heat operations, while C-CureEdge(TM) closed loop ends ensure safety in production environment. Product is packaged with EZSplice(TM) system that includes pliers kit and sprockets.

Eaton Corp.    Cleveland, OH 44114
Nov 03, 2006 High Pressure 30 (HP30) disc valve motor features no-load pressure drop of less than 200 psi at 25 gpm flow. It is designed for mobile off-highway applications requiring up to 30,000 lb-in. of intermittent torque and provides continuous pressure of 4,500 psi at 45 gpm, intermittent pressure of 5,070 psi at 70 gpm, and maximum inlet pressure of 6,000 psi. Optional hydraulic parking brake offering up to 31,000 lb-in. of static holding torque is available.

Aerotech, Inc.    Pittsburgh, PA 15238
Nov 02, 2006 Available in 100, 150, 200, 250, and 325 mm aperture sizes, ALAR Rotary Stages provide angular positioning and velocity control with axial load capacity of 300-1,000 lb. Stages are 65-160 mm tall and deliver smooth motion without travel restrictions. They utilize brushless, slotless motors with zero cogging and no torque ripple. Performance is assured with encoder line counts from 31,000-74,000 per rev, resulting in resolutions from 0.02-0.009 arc-sec/count.

Eaton Corp.    Southfield, MI 48037
Nov 02, 2006 Twin Vortices Series (TVS(TM)) Roots-type supercharger allows automakers to use smaller compressors to create optimal engine boost. In addition to scalable design, unit features 4-lobe rotors as well as high-flow inlet and outlet ports that promote thermal efficiency, which translates to increased volumetric capacity at higher RPMs.

Briggs & Stratton Corp.    Milwaukee, WI 53213
Oct 26, 2006 Vanguard(TM) V-Twin BIG BLOCK(TM) air-cooled engines are offered in vertical shaft models, 895 and 993 cc, for powering commercial applications. Along with centrifugal, multi-stage industrial air cleaner, engines incorporate debris management system that allows for cool and clean operation. Both models, based on V-Twin/Overhead Valve technology, feature aluminum block and steel-backed aluminum bearings. Tuned intake and exhaust systems minimize noise.

Briggs & Stratton Corp.    Milwaukee, WI 53213
Oct 26, 2006 Suited for use with 5.5-6.5 hp commercial equipment, CP550 and CP650 single-cylinder engines have compact Overhead Valve design, dual ball bearing crankshaft, and Dura-Bore cast iron cylinder sleeve. One-start carburetor enables one-pull starts and promotes smooth operation. Along with fuel shut-off valve and Lo-Tone muffler, engines incorporate high-mount oil-fill, low-oil sensor, and panel-style air filter with pre-cleaner and debris-ejection slots.

Copley Controls Corp.    Canton, MA 02021
Oct 26, 2006 Equipped with 2 independent load-positioning Forcers, each controlled by its own Xenus Micro controller, direct drive ServoTube linear motors enable pick-and-place to positioning 2 items in time usually required for one. Multiple forcers run on single rail bearing and pick twin objects with one center-to-center distance and then place them elsewhere at different center-to-center distance. Forcers develop up to 80 lb peak drive force and 3 m/sec peak velocity each.

Saia-Burgess Inc.    Vandalia, OH 45377-0427
Oct 23, 2006 Ledex® Magnetic latching linear actuators feature solenoids that utilize permanent magnet technology to produce linear force without magnetic steel components. Permanent magnet allows unit to be driven in 2 directions with force-stroke curve that is relatively flat over entire length. Additional steel washer causes magnets to latch at either or both ends of stroke. Strokes greater than 1.00 in. can be achieved.

AC Technology Corp.    Uxbridge, MA 01569 2001
Oct 19, 2006 Maintenance-free MUS Series is fitted with high flux density Neodymium Iron Boron magnets, reducing rotor inertia. Motors cover torque range from 380 W to 3.5 kW and feature torque-to-inertia ratio that promotes acceleration and dynamic responses. Design and location of thermal sensor eliminate risk of overheating and demagnetizing.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 18, 2006 Designed to align and fit Bu-Ord size 11 devices, models S9111A-T640 (SB), T641 (AB), and T642 (ZB Series) gearheads are available in 3 degrees of anti-backlash precision with 16 different gear ratios ranging from 2:1-36:1. Input shaft is located at front of gearhead, and geartrain design utilizes passivated SS 416 gears and shafts conforming to ASTM 582 and QQ-P-35 standards. Gearheads have black anodized housing measuring 1.250 in. long with 1.062 in. dia.

I-TECH International Corp.    Pompton Plains, NJ 07444
Oct 18, 2006 Delivering clamping force required for rotary and fixed workholding devices, CMT Electronic Actuation System uses motor and ball screw arrangement that transfers rotary movement into axial movement. Used on lathes and other machinery, system can change clamping force instantaneously as part of CNC program. It clamps with maximum force required to hold work piece and not deform work while maximizing spindle rotational speed.

H2W Technologies, Inc.    Santa Clarita, CA 91350
Oct 18, 2006 Capable of speeds to 118 ips and acceleration up to 5 G's, closed loop linear steppers with integral linear encoder feature repeatability to .0004 in./ft and accuracy to .001 in./ft. Stages are available in travel lengths to 144 in. and forces of 6, 10, and 20 lb. Cable carrier ensures cables protection and provides cycle 100,000,000 plus cycle counts.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 12, 2006 Suited for low voltage motorized display applications, A 3Z16 Series 36 DC Gearmotors are available in 3, 6, and 12 V versions with no load rpm ranges from .5-115 and gear ratios from 4,300:1-16:1. Reversible gearmotors are enclosed in ABS plastic and feature .125 in. steel shafts; 3 V version is supplied with twist-on clip for 2 D-size batteries. Direction of rotation is clockwise facing shaft, and opposite rotation versions are available.

Wittenstein, Inc. (formerly Alpha Gear Drives, Inc.)    Bartlett, IL 60103
Oct 12, 2006 Two-stage right-angle gearhead, TPK+, is equipped with alpha TP+ planetary gearhead on output side and features helical-toothed planetary gearhead stage mounted at TPK+ output. Hypoid gearset at input (up to i=10 in single stage) enables product to take place of 3-stage bevel-planetary gearhead. Offered with range of reduction ratios, gearhead offers smooth, vibration-free running with torsional and tilting stiffness that lend to precision of dynamic processes.

Helical Products Co., Inc.    Santa Maria, CA 93456 1069
Oct 12, 2006 Offered in sizes as small as ¼ in. diameter for shaft sizes down to 3.32 in., one-piece Flexible Couplings can transmit torque in angular, parallel, and/or skewed modes. Units are available in aluminum, stainless steel, or plastic. They can be used in precision engineering applications and are especially able to accommodate tight or skewed connections.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 12, 2006 Suited for variety of instrumentation applications, A 2Z17, A 2Z18, and A 2Z19 Series provide standard gear ratings from 6:1 to 100:1. Worm gears are phosphor bronze, while hardened worm is steel, and housings are aluminum alloy with black anodized finish. Featuring ball bearing mounted input shaft, units provide breakaway torque of .07-1.12 oz-in. and output torque of 4.5-39 lb-in. Max backlash is ½° and max input speed is 6,000 rpm for both inch and metric types.

New Scale Technologies    Victor, NY 14534
Oct 12, 2006 SQL Series piezoelectric SQUIGGLE motors convert ultrasonic vibrations into precise linear motion. Able to hold their position when power is turned off, these ceramic motors are compatible with high magnetic fields, including MRI chambers. Uses include nanotechnology research, microelectronics, optics, lasers, biotechnology, medical devices, aerospace and defense, and fluid control, as well as office/consumer products such as mobile phone cameras.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 12, 2006 Comprised of 6 right angle drives, A2Z4 and S9914Y-G Series include 3 worm gear types with 5:1, 10:1, and 20:1 ratios and 3 brass bevel gear types with 1:1, 2:1, and 3:1 ratios. Units feature 10 oz-in. breakaway torque, 200 oz-in. output torque, max backlash of 5°, and max input speed of 2,000 rpm. Housings are aluminum alloy with iridite finish, and all shafts are stainless steel. Measuring 1 1/16 x 1 17/32 x 1½ in., all units have one ¾ in. long input shaft and two ¾ in. long output shafts.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 11, 2006 Comprised of 10 base- and flange-mounted shaft supports, S64SBAM and S61SFAM Series are produced from cast aluminum and feature steel clamping screws. Metric shaft supports, stocked in base-mount or flange-mount styles, accommodate shaft diameters from 10-25 mm.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 11, 2006 Incorporating hardened planet gears machined to AGMA 12 tolerances, Series S9117T-, S9123T-, S9134T-, and S9142T- provide torque multiplication, speed reduction, and inertial matching for dc servo, stepper, and brushless servomotors. Each unit is available with low backlash single- and double-stage reductions with gear ratios ranging from 3:1 to 100:1. Offered in shaft diameters from .250-.625 in., all have anodized aluminum housing and sealed ball bearings.