Bodine Electric Company    Northfield, IL 60093
Mar 16, 2009 Available in 24A and 33A frame motor sizes, 12 V PMDC Gearmotors and Motors can be built in combination with parallel shaft, hollow shaft, or right-angle gearheads with gearmotor output speeds from 5.6-660 rpm. Units range from 1/50-1/8 hp and can generate up to 310 lb-in. torque. Pulse-width-modulated Type WPM-12 Vdc Speed Control is suited for battery-powered, solar-powered, and other low-voltage applications that require basic, single-direction speed control.

Bodine Electric Company    Northfield, IL 60093
Mar 16, 2009 Unfiltered type UPM DC motor speed controls target PMDC gearmotors/motors operate from 115/230 Vac and offer output voltages from 0-90 Vdc at 115 Vac and 0-180 Vdc at 230 Vac, at 50/60 Hz input voltage. Offering PWM control, filtered type WPM DC motor speed controls operate from 115 Vac at 50/60 Hz line and provide output of 0-130 Vdc. Both feature 8 DIP switches and ¼ in. quick connect tabs or plug-in terminal connections.

Subaru of America    Cherry Hill, NJ 08002
Mar 16, 2009 Available in 653 or 720 cc configurations, EH72 V-Twin and EH72 UTV deliver outputs from 20-27 hp, suitable for welders, generators, pressure washers, and lawnmowers. Engines feature 2-barrel manifold with fuel injector for each cylinder, allowing cylinders to operate independently of each other. Using sensors to detect manifold pressure, ambient temperature, and throttle position, Electronic Control Unit constantly relays information to injector, which delivers proper air-to-fuel ratio.

PBC Linear    Roscoe, IL 61073
Mar 13, 2009 Belt-driven PLB actuating system includes Integral V(TM) guided cam rollers and steel raceways to guide rollers. Rolling system provides accuracy to within 0.1 mm/m and supports steel-reinforced belt for 10 m/sec speed and high-acceleration travel. Composed of anodized aluminum, outer housing of PLB also tolerates corrosive environments. Optional dual carriage design, clamps, limit switches, and shaft extensions are available.

Custom Sensors & Technologies (CST)    Moorpark, CA 93021
Mar 13, 2009 Integrating motor and valve, Linear Motor Series provides proportional control of gas flow for energy-efficient gas heating. Synchronous model provides 10 mm displacement at 115 V, linear step speed of 0.833 or 1.67 mm/sec, and output force of 27-45 N. Featuring dual safety system, 2 stepper-based models incorporate -7.5° and -15° step angle, linear step displacement of 0.0167 and 0.033 mm/step, and output force of 38 or 58 N and 38 or 43 N, respectively. All provide linear travel of 10 mm.

Maxon Precision Motors    Fall River, MA 02720
Mar 13, 2009 Featuring OD of 32 mm, Koaxdrive KD 32 combines worm and planetary gearing, with worm-formed motor pinion driving 3 offset planetary wheels interlocking with internal gear. Plastic planetary wheels allow for minimized noise and coupling element is assembled on motor side so shaft is not subjected to axial load. Many reduction ratios are available in 11:1 to 1091:1 range and gearhead provides torque of 6.5 Nm as well as input speed of 8,000 rpm.

Igus, Inc.    East Providence, RI 02914 0349
Mar 13, 2009 Made with iglide® A500 races and cage, which offers chemical resistance, Xiros Ball Bearings feature stainless steel, corrosion-free balls. Deep-groove bearings are available for varying shaft diameters and are temperature-resistant up to 302°F. Dry-running, lubrication-free units are suited for medical engineering, chemical, food, pharmaceutical, biotechnology, and plant engineering.

Bison Gear & Engineering Corp.    St. Charles, IL 60174
Mar 11, 2009 Designed to attach directly to permanent magnet DC motors up to 1/6 hp, TightDrive(TM) offers 20:1 speed range with max output of 90 V. Variable speed SCR drive is housed in aluminum extrusion, which offers NEMA1/IP30 protection and heat dissipation. Three accessible adjustable potentiometers provide settings for minimum RPM, maximum RPM, and current limiting. Intended for 115 V 50/60 Hz operation, unit comes with 3 ft power cord and NEMA 5-15P plug.

Newport Corp.    Irvine, CA 92606
Mar 10, 2009 Developed to replace micrometer drives in manual stages, TRA Series offers 6, 12.5, and 25 mm travel ranges. Each model is available in DC, stepper motor, and vacuum-compatible stepper motor versions. Suited for motion applications in research, industrial, and health sciences, units features sub-micron, minimal incremental motion; micron level repeatability; and integrated optical switch for repeatable home positioning.

Pittman Corp    Harleysville PA 19438
Mar 09, 2009 Designed for Pittman® brush and brushless DC motors, G30A models incorporate sintered steel planet gears to achieve high torque capacity and low audible noise. They offer maximum load capabilities of 106 oz-in. for 1-stage models and up to 1,250 oz-in. for versions with 4-stages or greater. Gearbox diameters range from 1.200 in. for round versions and 1.496 in. for square types, while lengths range from 0.895-1.585 in., and weights range from 3.9-6.6 oz, depending on model.

Parker Hannifin Corp., Hydraulics Group    Sanford, NC 27330
Mar 09, 2009 Hydro-mechanical series reduces fuel consumption, emissions, and brake wear while increasing productivity in vehicles used in high start-and-stop applications, such as refuse trucks. It replaces conventional transmission with one that marries variable features of hydrostatic drive, suited for urban routes, with performance of mechanical drive, suited for highway speeds. Also, accumulated energy from vehicle's braking system is stored and used to power truck each time it accelerates.

IntelLiDrives Inc.    Philadelphia, PA 19152
Mar 06, 2009 Built with LSMA-175 Series motorized actuators, LSMA-175-XYZ Multi-Axis Systems offer load capacity of 8 kg and straightness of 5 microns. Motorized stages are driven by brushless or stepper motor with precision ground ball screw, and offer resolution up to 0.1 micron. Actuator has low-profile, monolithic design, making systems suited for integration in high precision measurement and manufacturing systems.

Intelligent Motion Systems, Inc.    Marlborough, CT 06447-1334
Mar 05, 2009 NEMA size 23 brushless 1.8° stepping motor MDrive23Plus is available in 3 versions; microstepping with step and direction input, motion control with intelligent programmable controller, and speed control with velocity controller. Featuring extended operating range of -40 to +85°C and small footprint, product is available with various options to meet specific application requirements including encoders, planetary gearboxes, QuickStart Kits, and interface cables.

Midwest Motion Products    Watertown, MN 55388
Mar 04, 2009 Model MMP-TM55-60-24V GP52-195 is reversible gearmotor capable of 443 lb-in. peak torque, requiring 1.3 A at 24 V for full load and also accepting battery power. Device is mounted with 4 equal spaced, face-mount M5 threaded holes. Featuring IP54 rating, it weighs 4 lb with 2.14 in. dia and 7.75 in. length and includes 12 mm dia, 25 mm long keyed output shaft. Motor windings for 12, 36, 48, 60, and 90 V are available.

B & R Industrial Automation Corp.    Roswell, GA 30076
Mar 04, 2009 With optimized torque ripple and stall torque between 0.8-2.5 Nm, 8JS three-phase synchronous motors have sinusoidal commutation with EnDat encoder or resolver as feedback unit. They directly divert lost power generated in stator to flange via housing, allowing regeneration of energy.

Misumi USA    Schaumburg, IL 60173
Mar 02, 2009 Available with 5 mm pitch, Models LX20 and LX26 feature travel rates of 250 mm/s, and include low dust raise grease, which significantly minimizes particle generation. Models come in standard or cover type with brackets that allow combination of 2 units on different axis. With 1,000 possible configurations, actuators can provide precision linear motion to packaging, medical, semiconductor, automotive, and other automated assembly operations.

Sprint Electric Ltd    Arundel East Susse BN18 0BE  United Kingdom
Mar 02, 2009 With up to 1,850 A (800 kW/1,080 hp), PLX digital drives suit heavy industry applications in mining, metal working or cement industry. They are available for supplies up to 690 Vac to enable control of DC motors up to 750 Vdc. Units have variety of fieldbus communications options, including: Profibus, DeviceNet, CC-Link, EtherNet/IP, Modbus and CANopen. Drives also include PL Pilot Windows based configuration and monitoring software package.

Toolmex Corp., Machinery Div.    Schaumburg, IL 60193
Mar 02, 2009 Featuring motor running at speed of 1,200 rpm, Elektrimax Design "D" oil well pump motors are suited for beam pumping units, punch presses, and applications demanding high slip and torque motor solutions. IP55 protected, dust and water resistant units have oversized regreasable bearings on both drive end and opposite drive end. Epoxy coated motors are rust and corrosion resistant, and are VPI process applied for optimal electrical performance.

JVL USA/Motion Control Sales Ltd.    Morrow, OH 45152
Feb 27, 2009 Featuring modular design can be adapted to various applications, MAC integrated servo motor can incorporate Module MAC00-FB4 for completely cable-free and wireless control. Motor can be set-up and controlled over BlueTooth link via mobile phone or PC through module, which can be programmed via MacTalk software. Module also offers possibility for connection of local zero-set sensor and provides full access to all functions and registers in MAC motor.

Instruments For Industry, Inc.    Ronkonkoma, NY 11779
Feb 26, 2009 Designed specifically for bellcore testing, Model T101-100-50 single drawer amplifier measures 17.5 x 19 x 27 in. Compact, lightweight amplifier unit provides minimum of 100 W up to 4.0 GHz and 50 W to 10 GHz with better than -20 dBc harmonic levels.